No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Keenso Asistente de Pedal de Bicicleta eléctrica Sensor de Pasillo Accesorio de Bicicleta Pedal de Bicicleta eléctrico 12 imanes Sensor Auxiliar Sensor de Velocidad
Conjunto de precisión : este producto está hecho de material ABS de , que es duradero y no es fácil de usar.Mecanizado de precisión, montaje de precisión, excelente calidad.
Sensor Hall a prueba de golpes - El sensor Hall tiene las ventajas de tamaño pequeño, peso ligero, a prueba de golpes, anticorrosión, a prueba de polvo, etc. Es adecuado para su uso en bicicletas eléctricas.
Ahorro de tiempo y esfuerzo : este sensor auxiliar es adecuado para el de conducción de bicicleta eléctrica asistida por pedal, ahorrando tiempo y esfuerzo.
G. H.
Comentado en los Estados Unidos el 30 de agosto de 2022
The sensor barely rotates via hand, it has so much friction. And once placed on the spindle it is even worse, it locks up completely. And it does not even get close to the frame, because it simply does not fit onto the round part of the spindle - not even with force, it would definitely break. It simply can not be installed. I have tried on two different bikes, with different brand square taper bottom brackets.
John Z.
Comentado en los Estados Unidos el 17 de julio de 2022
Received a defective sensor that not only does not work but also rotates very poorly. The sensor turns not as effectively. I will order another one to test it again, but so far this is worse than the default sensor that comes with the Jetson Bolt Pro.
Cleidus B.
Comentado en los Estados Unidos el 9 de febrero de 2022
Not the worst, could be wired correctly
TomJ
Comentado en los Estados Unidos el 19 de mayo de 2021
Lectric is back ordered on parts so I went looking on Amazon for a replacement PAS that was compatible with my Lectric’s controller. This used the same cable connector and appeared that it would fit in the same location as the original. This PAS fits perfectly on the crank. Actually has a better fit than the original. No slop like Lectric’s part had. The only problem was the 3 wires are in the wrong order to work with my controller’s wiring. That was an easy fix. Use a small pen to pop the wire pins out of the connector housing and rearrange to match the color order on the factory PAS cable. Worked like a charm. And it eliminated the need for the small wire that connects between the controller and factory PAS that always seems to be a problem.
I. T. Chew
Comentado en los Estados Unidos el 27 de noviembre de 2021
Wanted to use this instead of the PAS sensor that came with BAFANG kit. Only issue I had was having to cut the wire and reconnect it to flip some of the connections to match the pins expected by the controller.
Productos recomendados
Mex $908.04
Mex $ 408 .00 Mex $408.00
Mex $3,519.05
Mex $ 1,689 .00 Mex $1,689.00
Mex $3,778.47
Mex $ 1,775 .00 Mex $1,775.00