No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Características
1. Hecho de latón macizo y material de hierro, duradero en uso.
2. Válvulas de presión sin cámara para válvula de neumático de alta presión para coche.
3. Viene con junta tórica de goma EPDM, puede evitar eficazmente fugas.
4. No se agrieta ni se deteriora debido a las condiciones climáticas.
5. Estilo atornillado, fácil instalación.
José Luis
Comentado en México el 2 de abril de 2025
Malo, las válvulas se mueven muy fácil y se baja el aireNo lo vuelvo a comprar
KCisco
Comentado en Canadá el 20 de abril de 2025
I installed these on my Stryker RV aluminum rims for my TPMS (tire pressure monitoring system). It was a relatively simple job to install these metal valve stems, the worst part was breaking the valve side bead on the tires. They fit perfectly in the standard size 0.453" valve hole with the smaller insert, but also come with a larger insert if needed for a 0.625" hole. Threading on the stems is well done, no burrs or poor threading here. In fact the threads are so smooth on the retaining nut portion I was concerned about the potential for it to loosen after installation, so applied a bit of blue Loctite to prevent the nut from backing off. Installed by snugging the nut until the rubber insert was about half compressed, and this was plenty to ensure no movement of the valve and no air leakage, without overly tightening. I like this model that tightens on the outside much more than the ones with the nuts inside the rim, as if you do have any air leakage you can snug it a bit more, or actually even remove the retaining nut once pressurized, (forgot to add loctite on the first one), whereas to do the same on the internal-nut versions would require bead-braking and tire/wheel disassembly again. I've used both styles and much prefer this external nut style. Appear to be high quality, nice chrome finish on brass, so shouldn't see any rust. Recommend this item and seller.
Jerry V
Comentado en Canadá el 4 de diciembre de 2023
Fast shipping, exactly as shown. Stems look great on my rims (dressed them up with blue metal caps to match my WRX), seem well constructed. The short length is perfect, easy to reach but they don't stick out. Easy to install - I added a small amount of lube to the rubber grommets and added blue loctite to the screws. Great value and looks!
PhilG
Comentado en Canadá el 25 de julio de 2022
Installed them on my Bushtec tow behind motorcycle trailer. They sealed perfectly and look great on the aluminum rims
Chad Lumley
Comentado en Canadá el 10 de mayo de 2021
Needed ty as advised
Ligia
Comentado en Canadá el 11 de octubre de 2020
I only received 2 pieces, description says its 4
Productos recomendados
Mex $150.00
Mex $ 88 .00 Mex $88.00
Mex $95.00
Mex $ 47 .00 Mex $47.00
Mex $169.00
Mex $ 94 .00 Mex $94.00