No hay artículos en el carro
No hay artículos en el carro Juego de tenazas engarzadoras de casquillo con 3000 piezas, trinquete autoajustable para conectores de terminales de alambre de cobre AWG23-7.
Rango de engarce - AWG: 23 - 7 (0.25-10 mm²) (Hexagonal).
Terminales de casquillo de alambre: 1800 piezas E0308 color amarillo (950 piezas) + E0508 color blanco (450 piezas) + E7508 color gris (400 piezas) + E1008 color rojo (310 piezas) + E1508 color negro (250 piezas) + E2508 color azul (200 piezas) + E4009 color anaranjado (110 piezas) + E4009 color gris (110 piezas) + E6012 color verde (70 piezas) + E6012 color amarillo (70 piezas) + E10-12 color rojo (80 piezas).
- E0308 AWG23 0.3 mm² E0508 AWG22 0.5 mm².
- E7508 AWG20 0.75 mm² E1008 AWG18 1.0 mm².
- E1508 AWG16 1.5 mm² E2508 AWG14 2.5 mm².
- E4009 AWG12 4.0 mm² E6012 AWG10 6.0 mm².
- E10-12 AWG7 10.0 mm².
Loren B
Comentado en los Estados Unidos el 21 de marzo de 2024
Really impressed with the whole kit.Came with tons of ferrules, the crimper and some wire strippers all for a great price.The crimper was comfortable to hold and easy to use, one of those things that makes your life a lot more annoying without the proper tool.The little tubs the ferrules come in are removable so you can pull out a chunk of what you need without leaving the whole case open. For someone like me who will always find a way to knock the whole thing on the ground this is much appreciated
the plant
Comentado en los Estados Unidos el 21 de febrero de 2024
These little ferrules Make setting up audio equipment, a breeze. They are designed to keep the stranded wires of electronic devices like speakers and other sound equipment. no more struggling to insert stranded wires make every electronic connection easy like plug and play.
PlaysCbricks
Comentado en los Estados Unidos el 6 de enero de 2024
the tool is heavy and good quality. the case, surprisingly is also. definitely not one of the cases that you usually get. each set of connectors has its own cup that is removable from the case, though they will need reorganize to match the chart card included. the crimping tool sits in a sturdy foam insert and is a little difficult to get out. though i suspect that will get easier as it wears. the set comes with a good set of wire strippers/cutter that appear to have a screw trimmer, but i cannot see any threads so i would not utilize it for one as it will mess up the threads. i had some 16 gauge wire and it slipped into the correct ferrule easily and was not allowed to protrude out the end. crimping took little force and i had a secure connection. i decided to play and utilized several larger connectors. i was able to get a good connection all the way down to the 10 gauge, though i did have to rotate and crimp the ferrule a few differnt times. i did not notice until i received the kit that it included two different color 12 gauge ferrules. remember these are for stranded wire only. no need to use them with solid.
Mike B.
Comentado en los Estados Unidos el 17 de enero de 2024
Using ferrule terminals give you significantly better contact between your wire and the receiver like a set screw. When you just twist a wire, pop it into a set screw receiver, and tighten it down your wire is going to spread out and not make full contact. With a ferrule terminal there's a metal sleave covering your wire which makes total contact with your wire and when it's clamped down it makes better contact with the wire, not worse. Clamping the ferrule terminal around the wire you get full contact around the entire diameter of your wire, you've now got a 100% contact patch between your wire and the set screw.Great, so ferrules are great. Great! But what about this ferrule clamping kit? Well, in a word, it's great!The kit comes with a simple to use, self locking ferrule clamper, a basic wire stripper that will allow you to strip and clean any wires you've got ferrule terminals for, and a LOT of ferrule terminals over a broad range of gauges from 23 AWG (0.3mm) to 7 AWG(10mm). All of that in a snap locking carrying case so you've got all your ferrule stuff and it won't be spilling all about your tool box.I tested this kit cleaning up some old speaker wires and that's a great use case for embedded installs like you're running wires through a wall where you can't easily get to the cable later on so don't want to use banana clips. I'm about to use them to run 120VAC to an LED power supply to all my office LED strip lights and dimmer controls. This is going to make the job so much easier and significantly more reliable.
Shelly Itkin / Shelly Loves to Read
Comentado en los Estados Unidos el 15 de enero de 2024
Inside this crimper set, you will find two tools (a wire stripper and a crimper). It includes two tools and 3,000 pieces in a handy case. Also included is a handy colored reference card that shows the various pieces and sizes included in the kit.I ordered this kit for some upgrades to the stereos of my two classic cars.If you are like me and always looking for the right tools and components in your shop, you will love how this case keeps everything neat and organized.The removable inserts are ideal, so you can just remove the cup with the specific size you are working on and then return it to the case to keep things neat and organized.With a weight of less than a pound, you can use the crimper with one hand.The wire stripper is 7 inches, and you can use multiple wire sizes from 10 gage to 20 gage.The spring-loaded wire stripper can easily be operated with just one hand.Now, everything is in one spot, which saves me time and energy. The case keeps it easy to spot whatever I need, which saves me lots of timeIt keeps everything neat, organized, and easy to find.
Productos recomendados
Mex $954.71
Mex $ 448 .00 Mex $448.00
Mex $386.00
Mex $ 189 .00 Mex $189.00