No hay artículos en el carro
No hay artículos en el carroOK Industries es una división de Jonard Tools. Normalmente se utiliza cuando se requiere flexibilidad, resistencia y bajo peso, el cable Kynar es ideal para aplicaciones de envoltura de alambre, fuente de alimentación, médicas y aeroespaciales. También se utiliza comúnmente para prototipos de placas de circuito debido a su peso más ligero y menor diámetro general. Además, el aislamiento Kynar proporciona excelentes propiedades mecánicas en un amplio rango de temperatura y es resistente a una amplia gama de productos químicos incluyendo la mayoría de ácidos inorgánicos y orgánicos, bases, alcoholes, disolventes halogenados e hidrocarburos alifáticos y aromáticos. Estas propiedades hacen que el cable Kynar sea una excelente opción cuando se trabaja incluso en las aplicaciones ambientales más duras. Este cable también cuenta con lo siguiente: el conductor de cobre chapado en plata OHFC (alta conductividad sin oxígeno) proporciona una conductividad eléctrica y flexibilidad excepcionales El aislamiento Kynar proporciona una alta resistencia a la temperatura (hasta 105 °C) y una excelente resistencia a la abrasión Cumple o supera las normas UL 1422.
Thomas B Fetter
Comentado en los Estados Unidos el 12 de julio de 2022
This wire is great for soldered point-to-point breadboard wiring. Unlike many wire wrap and multi-strand wires, the insulation does not melt and shrink away when soldering. The silver plating takes solder very easily, so the wire does not need to be pre-tinned with solder before being soldered to the joint as is necessary with many wires now. The insulation is thin but strong, so the wires lay down on the breadboard nicely. And the wire is available in a number of gauges. This is far better than any other breadboarding wire that I have used recently, and it is reasonably priced.
Peter
Comentado en Canadá el 24 de mayo de 2017
works great, very well prices
Matt R
Comentado en Canadá el 30 de agosto de 2016
This is some of the best wire I've worked with. It's thin and durable. Great choice for any small electronics project. I like it so much, I've bought all the available colors!
Chancey
Comentado en los Estados Unidos el 9 de mayo de 2016
Good wire, arrived quickly
Gizmo
Comentado en los Estados Unidos el 18 de junio de 2014
Expensive for what it is, but performs well. Good for electronic prototyping. I wouldnt go over 1A on this gauge however. Great quality. Strips easily, I can just use my teeth. I can break it with my hand, which is nice for quick jobs. A soldering iron melts the insulation, which is both a huge benefit and a liability. When I am making connections, I just stretch the wire over to where I want it, melt the insulation back in that spot with a touch of the iron, and then solder it down. Its super easy once I figured that out, and you can make multiple connections with the same wire that way, in series. However, if I am careless and I have a complicated piece, sometimes I'll let the iron rub against a wire and melt it. I've melted lots of components that way, and it comes with the territory of using an iron I suppose. Overall, I greatly prefer that I can strip the insulation with a touch of the iron. Not sure if its "pre-tinned" or not, but grabs solder well. I couldnt work without this stuff now.
Productos recomendados
Mex $1,550.00
Mex $ 651 .00 Mex $651.00
Mex $947.00
Mex $ 520 .00 Mex $520.00
Mex $370.05
Mex $ 185 .00 Mex $185.00
Mex $1,519.00
Mex $ 698 .00 Mex $698.00
Mex $178.00
Mex $ 101 .00 Mex $101.00