No hay artículos en el carro
No hay artículos en el carroSimplifica tus proyectos de fontanería con la válvula de cierre hembra John Guest. Hecho de polipropileno, este accesorio de empuje para conectar no requiere herramientas ni pegamento para una conexión segura y sin fugas. Esta válvula de cierre de fontanería está equipada con juntas tóricas EPDM de grado alimenticio y cumple con la FDA. Estas válvulas de cierre seguras y duraderas están aprobadas para aplicaciones detrás de la pared como una conexión permanente sin fugas y están certificadas para su uso en aplicaciones de agua potable y sistema de calefacción hidrónico. Las válvulas de cierre de ángulo hembra de empuje de plástico John Guest están clasificadas a 150 PSI a 71 ° F y 60 PSI a 140 ° F.
Harley
Comentado en los Estados Unidos el 9 de noviembre de 2024
If you need a 3/8” quick connect (push in) water tank valve for your RO line, this is the one you need. I bought a cheaper version about 6 months ago to add a 2nd tank to my RO system. About 4 months later, my wife saw water dripping from the kitchen sink cabinet. The issue was the tank valve I had purchased earlier. The base of the valve that screws onto the tank nipple had split. I was getting a slow but consistent drip from the valve and it ended up ruining the bottom of the cabinet from water damage. I ordered this replacement and it’s clearly made by people who know what they are doing. The base of this valve is reinforced by a brass ring to prevent the plastic from cracking. Works like a charm and I am confident this piece will not fail over time. Spend the extra few dollars to get one that will last.
Miro
Comentado en los Estados Unidos el 19 de noviembre de 2024
It took me a couple orders before I found this one. There are multiple types and sizes of these. The output is 3/8 here, which is the thicker RO tubing. Some of these valves are only 1/4 output, which fit the thin tubes, so best to check the type of tubes in use on your system here. The other end, the end that fits onto the RO tank-- NPTF is the twist on type. They make multiple sizes of this and despite thinking I needed 3/8 on the bottom, 1/4 NPTF seems to be the more common RO sizing.Use a little plumbers tape on the twist on to ensure a smooth/leak free connection. Screw on by hand as tight as you can possibly get it to go. No leaks yet on two of these. The valve does its job. The price on this is a bit steep for what should be a $3 part, but it works perfect and is the only one out there it seems.
Dr. K
Comentado en Canadá el 5 de marzo de 2020
Works perfectly. You will need a teflon tape for the connection to the tank. Quick connected to the 3/8 hose without any issues
Bitjockey
Comentado en Canadá el 17 de septiembre de 2020
The description is not accurate; yes, one fitting is push-fit, the other is threaded. They should at least include a view of the bottom threaded part, or state that one connector is NPTF. I was looking for 1/4 x 1/4 push-fit. Not worth returning this, the hunt continues.
Al
Comentado en Canadá el 24 de noviembre de 2019
Works great
miguel melgarejo
Comentado en México el 21 de septiembre de 2017
Excelente reemplazo de calidad, funciona muy bien sin problema alguno de instalación, robusta y segura mejor no se puede encontrar
Productos recomendados
Mex $113.00
Mex $ 59 .00 Mex $59.00
Mex $346.08
Mex $ 183 .00 Mex $183.00
Mex $148.84
Mex $ 86 .00 Mex $86.00
Mex $1,304.13
Mex $ 547 .00 Mex $547.00