No hay artículos en el carro
No hay artículos en el carroConsejos útiles para usar este control remoto: (Video en https://youtu.be/26b7nDPH78w) 1. Disparo único (con cable/inalámbrico): presione el botón del obturador hasta la mitad para enfocar y presione completamente para activar el obturador 2. Disparador automático (con cable /inalámbrico): configure "DE" en el tiempo que desea retrasar y presione el botón "inicio" 3. Temporizador de disparo continuo (configure la cámara en modo de disparo continuo) (con cable): presione completamente el botón del obturador y deslícelo hacia arriba bloquearlo para disparo continuo (con cable/inalámbrico): configure la "BU" en el tiempo que desee y presione el botón "inicio", si está configurado en 5 segundos, la cámara mantendrá el disparo continuo dentro de 5 segundos 4. Temporizador de exposiciones largas (configure el obturador de la cámara velocidad al modo Bulb) (con cable): Presione completamente el botón del obturador y deslícelo hacia arriba para bloquearlo para exposiciones prolongadas. (con cable/inalámbrico): configure la "BU" en el tiempo que desee y presione el botón "iniciar". Si está configurado en 8 segundos, la cámara mantendrá la exposición del obturador durante 8 segundos. 5. Temporizador de intervalos y número de disparos (con cable/inalámbrico): Configure "INT" en el tiempo que desee y configure "N" en los números que desee. Si configura 3 segundos para "INT" y 5 para "N", la cámara tomará 5 fotografías y el intervalo de tiempo entre cada una. es 3 s Pregunta: Necesito 50 imágenes, el tiempo de exposición para cada imagen es de 10 s y el intervalo de tiempo entre cada imagen es de 5 s, ¿cómo se configura? Re: (Cámara en modo Bulb) Configure "BU" en 10 s y "INT" en 15 s, luego configure "N" en 50 y presione el botón "start". Por qué es necesario configurar "INT" en 15 segundos en lugar de 5 segundos, ya que desea que el intervalo sea de 5 segundos, ya que en los programas predeterminados de este control remoto, el tiempo del intervalo incluye el tiempo de exposic
Genius
Comentado en los Estados Unidos el 6 de agosto de 2024
Slow hard to press buttons
Genius
Comentado en los Estados Unidos el 6 de agosto de 2024
Slow hard to press buttons
Genius
Comentado en los Estados Unidos el 6 de agosto de 2024
Slow hard to press buttons
Genius
Comentado en los Estados Unidos el 6 de agosto de 2024
Slow hard to press buttons
Genius
Comentado en los Estados Unidos el 6 de agosto de 2024
Slow hard to press buttons
Genius
Comentado en los Estados Unidos el 6 de agosto de 2024
Slow hard to press buttons
Genius
Comentado en los Estados Unidos el 6 de agosto de 2024
Slow hard to press buttons
Genius
Comentado en los Estados Unidos el 6 de agosto de 2024
Slow hard to press buttons
Waegn
Comentado en los Estados Unidos el 4 de marzo de 2023
I have only had this Remote Control Shutter Release for my Fujifilm X-T4 camera for a short period of time. So, I have not tried out all the features. I needed a remote shutter release for my camera and could have gotten by with a much cheaper brand that would have done this single task. However, when I make a purchase, I like to buy a product that will give me as many options as possible for future use, even though I may not ever take advantage of all the available options. Therefore, after doing some research on available remote shutter units, I selected this brand. This will not be a comprehensive review, as I have not used this unit and tested all its capabilities. But there are some things that I have noticed and wanted to include in a review a this point in time.1. The 2-components of this system are plastic, but are well made for their intended purpose.2. The cable that plugs into the camera is also well made with a rubber coating. When not it use, the cable returns to a coiled position to make it easier to handle and store.3. I do not like how the hot shoe mount unit locks onto the camera with a thumbscrew. Once mounted onto the camera, only the back edge of the thumbscrew is available for tightening with a single finger. This makes it impossible for one to really get the unit mounted tight onto the camera. Even, after tightening as much as possible, the unit can be slid off the camera's hot shoe mount with a bit of pressure. I would not be comfortable mounting this unit to the camera and then carrying it around all day out in the field as it could loosen, fall off, and become lost.I solved this problem as follows: In my bag of camera gear, I happened to have a standalone hot shoe mount which had a 1/4-20 screw. This fit into the bottom of the hot shoe mount unit and had the effect of raising it up about an inch above the camera hot shoe. This additional height allowed me the room needed to firmly tighten the hot shoe mount unit to the camera, and seems to have solved the problem.4. Last, but not least, there did seem to be a bit of delay in shipping from the JJC manufacturer. I ordered this product on 1/4/23, but it was not finally delivered until 2/28/23, a period of about 6.5 weeks. I did not receive any explanation from JJC for this delay.
Waegn
Comentado en los Estados Unidos el 4 de marzo de 2023
I have only had this Remote Control Shutter Release for my Fujifilm X-T4 camera for a short period of time. So, I have not tried out all the features. I needed a remote shutter release for my camera and could have gotten by with a much cheaper brand that would have done this single task. However, when I make a purchase, I like to buy a product that will give me as many options as possible for future use, even though I may not ever take advantage of all the available options. Therefore, after doing some research on available remote shutter units, I selected this brand. This will not be a comprehensive review, as I have not used this unit and tested all its capabilities. But there are some things that I have noticed and wanted to include in a review a this point in time.1. The 2-components of this system are plastic, but are well made for their intended purpose.2. The cable that plugs into the camera is also well made with a rubber coating. When not it use, the cable returns to a coiled position to make it easier to handle and store.3. I do not like how the hot shoe mount unit locks onto the camera with a thumbscrew. Once mounted onto the camera, only the back edge of the thumbscrew is available for tightening with a single finger. This makes it impossible for one to really get the unit mounted tight onto the camera. Even, after tightening as much as possible, the unit can be slid off the camera's hot shoe mount with a bit of pressure. I would not be comfortable mounting this unit to the camera and then carrying it around all day out in the field as it could loosen, fall off, and become lost.I solved this problem as follows: In my bag of camera gear, I happened to have a standalone hot shoe mount which had a 1/4-20 screw. This fit into the bottom of the hot shoe mount unit and had the effect of raising it up about an inch above the camera hot shoe. This additional height allowed me the room needed to firmly tighten the hot shoe mount unit to the camera, and seems to have solved the problem.4. Last, but not least, there did seem to be a bit of delay in shipping from the JJC manufacturer. I ordered this product on 1/4/23, but it was not finally delivered until 2/28/23, a period of about 6.5 weeks. I did not receive any explanation from JJC for this delay.
Waegn
Comentado en los Estados Unidos el 4 de marzo de 2023
I have only had this Remote Control Shutter Release for my Fujifilm X-T4 camera for a short period of time. So, I have not tried out all the features. I needed a remote shutter release for my camera and could have gotten by with a much cheaper brand that would have done this single task. However, when I make a purchase, I like to buy a product that will give me as many options as possible for future use, even though I may not ever take advantage of all the available options. Therefore, after doing some research on available remote shutter units, I selected this brand. This will not be a comprehensive review, as I have not used this unit and tested all its capabilities. But there are some things that I have noticed and wanted to include in a review a this point in time.1. The 2-components of this system are plastic, but are well made for their intended purpose.2. The cable that plugs into the camera is also well made with a rubber coating. When not it use, the cable returns to a coiled position to make it easier to handle and store.3. I do not like how the hot shoe mount unit locks onto the camera with a thumbscrew. Once mounted onto the camera, only the back edge of the thumbscrew is available for tightening with a single finger. This makes it impossible for one to really get the unit mounted tight onto the camera. Even, after tightening as much as possible, the unit can be slid off the camera's hot shoe mount with a bit of pressure. I would not be comfortable mounting this unit to the camera and then carrying it around all day out in the field as it could loosen, fall off, and become lost.I solved this problem as follows: In my bag of camera gear, I happened to have a standalone hot shoe mount which had a 1/4-20 screw. This fit into the bottom of the hot shoe mount unit and had the effect of raising it up about an inch above the camera hot shoe. This additional height allowed me the room needed to firmly tighten the hot shoe mount unit to the camera, and seems to have solved the problem.4. Last, but not least, there did seem to be a bit of delay in shipping from the JJC manufacturer. I ordered this product on 1/4/23, but it was not finally delivered until 2/28/23, a period of about 6.5 weeks. I did not receive any explanation from JJC for this delay.
Waegn
Comentado en los Estados Unidos el 4 de marzo de 2023
I have only had this Remote Control Shutter Release for my Fujifilm X-T4 camera for a short period of time. So, I have not tried out all the features. I needed a remote shutter release for my camera and could have gotten by with a much cheaper brand that would have done this single task. However, when I make a purchase, I like to buy a product that will give me as many options as possible for future use, even though I may not ever take advantage of all the available options. Therefore, after doing some research on available remote shutter units, I selected this brand. This will not be a comprehensive review, as I have not used this unit and tested all its capabilities. But there are some things that I have noticed and wanted to include in a review a this point in time.1. The 2-components of this system are plastic, but are well made for their intended purpose.2. The cable that plugs into the camera is also well made with a rubber coating. When not it use, the cable returns to a coiled position to make it easier to handle and store.3. I do not like how the hot shoe mount unit locks onto the camera with a thumbscrew. Once mounted onto the camera, only the back edge of the thumbscrew is available for tightening with a single finger. This makes it impossible for one to really get the unit mounted tight onto the camera. Even, after tightening as much as possible, the unit can be slid off the camera's hot shoe mount with a bit of pressure. I would not be comfortable mounting this unit to the camera and then carrying it around all day out in the field as it could loosen, fall off, and become lost.I solved this problem as follows: In my bag of camera gear, I happened to have a standalone hot shoe mount which had a 1/4-20 screw. This fit into the bottom of the hot shoe mount unit and had the effect of raising it up about an inch above the camera hot shoe. This additional height allowed me the room needed to firmly tighten the hot shoe mount unit to the camera, and seems to have solved the problem.4. Last, but not least, there did seem to be a bit of delay in shipping from the JJC manufacturer. I ordered this product on 1/4/23, but it was not finally delivered until 2/28/23, a period of about 6.5 weeks. I did not receive any explanation from JJC for this delay.
Waegn
Comentado en los Estados Unidos el 4 de marzo de 2023
I have only had this Remote Control Shutter Release for my Fujifilm X-T4 camera for a short period of time. So, I have not tried out all the features. I needed a remote shutter release for my camera and could have gotten by with a much cheaper brand that would have done this single task. However, when I make a purchase, I like to buy a product that will give me as many options as possible for future use, even though I may not ever take advantage of all the available options. Therefore, after doing some research on available remote shutter units, I selected this brand. This will not be a comprehensive review, as I have not used this unit and tested all its capabilities. But there are some things that I have noticed and wanted to include in a review a this point in time.1. The 2-components of this system are plastic, but are well made for their intended purpose.2. The cable that plugs into the camera is also well made with a rubber coating. When not it use, the cable returns to a coiled position to make it easier to handle and store.3. I do not like how the hot shoe mount unit locks onto the camera with a thumbscrew. Once mounted onto the camera, only the back edge of the thumbscrew is available for tightening with a single finger. This makes it impossible for one to really get the unit mounted tight onto the camera. Even, after tightening as much as possible, the unit can be slid off the camera's hot shoe mount with a bit of pressure. I would not be comfortable mounting this unit to the camera and then carrying it around all day out in the field as it could loosen, fall off, and become lost.I solved this problem as follows: In my bag of camera gear, I happened to have a standalone hot shoe mount which had a 1/4-20 screw. This fit into the bottom of the hot shoe mount unit and had the effect of raising it up about an inch above the camera hot shoe. This additional height allowed me the room needed to firmly tighten the hot shoe mount unit to the camera, and seems to have solved the problem.4. Last, but not least, there did seem to be a bit of delay in shipping from the JJC manufacturer. I ordered this product on 1/4/23, but it was not finally delivered until 2/28/23, a period of about 6.5 weeks. I did not receive any explanation from JJC for this delay.
Waegn
Comentado en los Estados Unidos el 4 de marzo de 2023
I have only had this Remote Control Shutter Release for my Fujifilm X-T4 camera for a short period of time. So, I have not tried out all the features. I needed a remote shutter release for my camera and could have gotten by with a much cheaper brand that would have done this single task. However, when I make a purchase, I like to buy a product that will give me as many options as possible for future use, even though I may not ever take advantage of all the available options. Therefore, after doing some research on available remote shutter units, I selected this brand. This will not be a comprehensive review, as I have not used this unit and tested all its capabilities. But there are some things that I have noticed and wanted to include in a review a this point in time.1. The 2-components of this system are plastic, but are well made for their intended purpose.2. The cable that plugs into the camera is also well made with a rubber coating. When not it use, the cable returns to a coiled position to make it easier to handle and store.3. I do not like how the hot shoe mount unit locks onto the camera with a thumbscrew. Once mounted onto the camera, only the back edge of the thumbscrew is available for tightening with a single finger. This makes it impossible for one to really get the unit mounted tight onto the camera. Even, after tightening as much as possible, the unit can be slid off the camera's hot shoe mount with a bit of pressure. I would not be comfortable mounting this unit to the camera and then carrying it around all day out in the field as it could loosen, fall off, and become lost.I solved this problem as follows: In my bag of camera gear, I happened to have a standalone hot shoe mount which had a 1/4-20 screw. This fit into the bottom of the hot shoe mount unit and had the effect of raising it up about an inch above the camera hot shoe. This additional height allowed me the room needed to firmly tighten the hot shoe mount unit to the camera, and seems to have solved the problem.4. Last, but not least, there did seem to be a bit of delay in shipping from the JJC manufacturer. I ordered this product on 1/4/23, but it was not finally delivered until 2/28/23, a period of about 6.5 weeks. I did not receive any explanation from JJC for this delay.
Waegn
Comentado en los Estados Unidos el 4 de marzo de 2023
I have only had this Remote Control Shutter Release for my Fujifilm X-T4 camera for a short period of time. So, I have not tried out all the features. I needed a remote shutter release for my camera and could have gotten by with a much cheaper brand that would have done this single task. However, when I make a purchase, I like to buy a product that will give me as many options as possible for future use, even though I may not ever take advantage of all the available options. Therefore, after doing some research on available remote shutter units, I selected this brand. This will not be a comprehensive review, as I have not used this unit and tested all its capabilities. But there are some things that I have noticed and wanted to include in a review a this point in time.1. The 2-components of this system are plastic, but are well made for their intended purpose.2. The cable that plugs into the camera is also well made with a rubber coating. When not it use, the cable returns to a coiled position to make it easier to handle and store.3. I do not like how the hot shoe mount unit locks onto the camera with a thumbscrew. Once mounted onto the camera, only the back edge of the thumbscrew is available for tightening with a single finger. This makes it impossible for one to really get the unit mounted tight onto the camera. Even, after tightening as much as possible, the unit can be slid off the camera's hot shoe mount with a bit of pressure. I would not be comfortable mounting this unit to the camera and then carrying it around all day out in the field as it could loosen, fall off, and become lost.I solved this problem as follows: In my bag of camera gear, I happened to have a standalone hot shoe mount which had a 1/4-20 screw. This fit into the bottom of the hot shoe mount unit and had the effect of raising it up about an inch above the camera hot shoe. This additional height allowed me the room needed to firmly tighten the hot shoe mount unit to the camera, and seems to have solved the problem.4. Last, but not least, there did seem to be a bit of delay in shipping from the JJC manufacturer. I ordered this product on 1/4/23, but it was not finally delivered until 2/28/23, a period of about 6.5 weeks. I did not receive any explanation from JJC for this delay.
Waegn
Comentado en los Estados Unidos el 4 de marzo de 2023
I have only had this Remote Control Shutter Release for my Fujifilm X-T4 camera for a short period of time. So, I have not tried out all the features. I needed a remote shutter release for my camera and could have gotten by with a much cheaper brand that would have done this single task. However, when I make a purchase, I like to buy a product that will give me as many options as possible for future use, even though I may not ever take advantage of all the available options. Therefore, after doing some research on available remote shutter units, I selected this brand. This will not be a comprehensive review, as I have not used this unit and tested all its capabilities. But there are some things that I have noticed and wanted to include in a review a this point in time.1. The 2-components of this system are plastic, but are well made for their intended purpose.2. The cable that plugs into the camera is also well made with a rubber coating. When not it use, the cable returns to a coiled position to make it easier to handle and store.3. I do not like how the hot shoe mount unit locks onto the camera with a thumbscrew. Once mounted onto the camera, only the back edge of the thumbscrew is available for tightening with a single finger. This makes it impossible for one to really get the unit mounted tight onto the camera. Even, after tightening as much as possible, the unit can be slid off the camera's hot shoe mount with a bit of pressure. I would not be comfortable mounting this unit to the camera and then carrying it around all day out in the field as it could loosen, fall off, and become lost.I solved this problem as follows: In my bag of camera gear, I happened to have a standalone hot shoe mount which had a 1/4-20 screw. This fit into the bottom of the hot shoe mount unit and had the effect of raising it up about an inch above the camera hot shoe. This additional height allowed me the room needed to firmly tighten the hot shoe mount unit to the camera, and seems to have solved the problem.4. Last, but not least, there did seem to be a bit of delay in shipping from the JJC manufacturer. I ordered this product on 1/4/23, but it was not finally delivered until 2/28/23, a period of about 6.5 weeks. I did not receive any explanation from JJC for this delay.
Sam Rai
Comentado en los Estados Unidos el 18 de julio de 2022
This item is really compatible with fujiflim xt4. I’m so glad I purchased this item, I wish I had bought it before.
Sam Rai
Comentado en los Estados Unidos el 18 de julio de 2022
This item is really compatible with fujiflim xt4. I’m so glad I purchased this item, I wish I had bought it before.
Sam Rai
Comentado en los Estados Unidos el 18 de julio de 2022
This item is really compatible with fujiflim xt4. I’m so glad I purchased this item, I wish I had bought it before.
Sam Rai
Comentado en los Estados Unidos el 18 de julio de 2022
This item is really compatible with fujiflim xt4. I’m so glad I purchased this item, I wish I had bought it before.
Sam Rai
Comentado en los Estados Unidos el 18 de julio de 2022
This item is really compatible with fujiflim xt4. I’m so glad I purchased this item, I wish I had bought it before.
Sam Rai
Comentado en los Estados Unidos el 18 de julio de 2022
This item is really compatible with fujiflim xt4. I’m so glad I purchased this item, I wish I had bought it before.
Sam Rai
Comentado en los Estados Unidos el 18 de julio de 2022
This item is really compatible with fujiflim xt4. I’m so glad I purchased this item, I wish I had bought it before.
Sam Rai
Comentado en los Estados Unidos el 18 de julio de 2022
This item is really compatible with fujiflim xt4. I’m so glad I purchased this item, I wish I had bought it before.
Gena
Comentado en los Estados Unidos el 19 de julio de 2021
good quality, easy to use. love to use it.
Gena
Comentado en los Estados Unidos el 19 de julio de 2021
good quality, easy to use. love to use it.
Gena
Comentado en los Estados Unidos el 19 de julio de 2021
good quality, easy to use. love to use it.
Gena
Comentado en los Estados Unidos el 19 de julio de 2021
good quality, easy to use. love to use it.
Gena
Comentado en los Estados Unidos el 19 de julio de 2021
good quality, easy to use. love to use it.
Gena
Comentado en los Estados Unidos el 19 de julio de 2021
good quality, easy to use. love to use it.
Gena
Comentado en los Estados Unidos el 19 de julio de 2021
good quality, easy to use. love to use it.
Gena
Comentado en los Estados Unidos el 19 de julio de 2021
good quality, easy to use. love to use it.
Garth Weals
Comentado en los Estados Unidos el 20 de agosto de 2020
Tested this out with an X-T4 and it works exactly as described. It took a few minutes to get the feel of the interface but it will be relatively easy to remember although I'm going to keep the instructions in the camera bag. Came with decent batteries and the overall quality looks good. My only negative so far it that the locking wheel for the hotshoe mount is not easy to rotate when mounted on the camera: wish they had used a locking pin with a release button.
Garth Weals
Comentado en los Estados Unidos el 20 de agosto de 2020
Tested this out with an X-T4 and it works exactly as described. It took a few minutes to get the feel of the interface but it will be relatively easy to remember although I'm going to keep the instructions in the camera bag. Came with decent batteries and the overall quality looks good. My only negative so far it that the locking wheel for the hotshoe mount is not easy to rotate when mounted on the camera: wish they had used a locking pin with a release button.
Garth Weals
Comentado en los Estados Unidos el 20 de agosto de 2020
Tested this out with an X-T4 and it works exactly as described. It took a few minutes to get the feel of the interface but it will be relatively easy to remember although I'm going to keep the instructions in the camera bag. Came with decent batteries and the overall quality looks good. My only negative so far it that the locking wheel for the hotshoe mount is not easy to rotate when mounted on the camera: wish they had used a locking pin with a release button.
Garth Weals
Comentado en los Estados Unidos el 20 de agosto de 2020
Tested this out with an X-T4 and it works exactly as described. It took a few minutes to get the feel of the interface but it will be relatively easy to remember although I'm going to keep the instructions in the camera bag. Came with decent batteries and the overall quality looks good. My only negative so far it that the locking wheel for the hotshoe mount is not easy to rotate when mounted on the camera: wish they had used a locking pin with a release button.
Garth Weals
Comentado en los Estados Unidos el 20 de agosto de 2020
Tested this out with an X-T4 and it works exactly as described. It took a few minutes to get the feel of the interface but it will be relatively easy to remember although I'm going to keep the instructions in the camera bag. Came with decent batteries and the overall quality looks good. My only negative so far it that the locking wheel for the hotshoe mount is not easy to rotate when mounted on the camera: wish they had used a locking pin with a release button.
Garth Weals
Comentado en los Estados Unidos el 20 de agosto de 2020
Tested this out with an X-T4 and it works exactly as described. It took a few minutes to get the feel of the interface but it will be relatively easy to remember although I'm going to keep the instructions in the camera bag. Came with decent batteries and the overall quality looks good. My only negative so far it that the locking wheel for the hotshoe mount is not easy to rotate when mounted on the camera: wish they had used a locking pin with a release button.
Garth Weals
Comentado en los Estados Unidos el 20 de agosto de 2020
Tested this out with an X-T4 and it works exactly as described. It took a few minutes to get the feel of the interface but it will be relatively easy to remember although I'm going to keep the instructions in the camera bag. Came with decent batteries and the overall quality looks good. My only negative so far it that the locking wheel for the hotshoe mount is not easy to rotate when mounted on the camera: wish they had used a locking pin with a release button.
Garth Weals
Comentado en los Estados Unidos el 20 de agosto de 2020
Tested this out with an X-T4 and it works exactly as described. It took a few minutes to get the feel of the interface but it will be relatively easy to remember although I'm going to keep the instructions in the camera bag. Came with decent batteries and the overall quality looks good. My only negative so far it that the locking wheel for the hotshoe mount is not easy to rotate when mounted on the camera: wish they had used a locking pin with a release button.
Productos recomendados
Mex $2,400.00
Mex $ 1,008 .00 Mex $1,008.00