No hay artículos en el carro
No hay artículos en el carroR. Swanson
Comentado en los Estados Unidos el 18 de junio de 2024
As advertised nice selection of rivets, good quality rivets.
Duke
Comentado en los Estados Unidos el 16 de junio de 2024
My father uses them in his business for cabinetry work. Says they work great.
Ben
Comentado en los Estados Unidos el 30 de marzo de 2024
Worked well. Strong rivets! Had to use my pneumatic riveter.
Nicholas W. Caputo, Esq.
Comentado en los Estados Unidos el 22 de agosto de 2023
SS Rivets worked well. Have not had them in place long enough to validate quality of material.
Polychrome Platypus
Comentado en los Estados Unidos el 11 de octubre de 2023
I used these with stainless back-up washers to attach stainless hardware on a fiberglass hull boat after re-painting. After 40 years a dissimilar metal reaction between stainless hardware and aluminum rivets was all too clear even on a lightly used fresh water boat. A stainless rivet sets with more clamping force than aluminum so I used backup washers to spread out the force at the hole edge to avoid creating cracks. I used #8 stainless washers as backup washers for 5/32 and #10 for 3/16.Installing these rivets by hand using the common Stanley consumer kit tool is not habit forming even for those who have the hand strength to do it. A pneumatic rivet setter is preferable to a manual tool with long handles if compressed air is available. I only needed to set 12 3/16 rivets. After pulling 3 by hand, I decided laying out and rolling up 100’ of air hose would be much easier than pulling 9 more. I have used an Astro Pneumatic PR14 https://www.amazon.com/Astro-Pneumatic-Tool-PR14-Riveter/dp/B07ZHNY2DW for roughly 6,000 rivets and it’s been very reliable. There are less expensive tools that are similar, one that can pull a steel 3/16 rivet can pull a stainless steel 3/16 rivet.
Productos recomendados