Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

Irwin Hanson 9740 2,5 cm 10 mm-1.5 Hexágono Métricas Die

Envío gratis en pedidos superiores a Mex $600.00

Mex $282.28

Mex $ 143 .00 Mex $143.00

En stock

Acerca de este artículo

  • Troquel métrico hexagol de 10 mm-1,5
  • Ideal para reparación de automóviles y maquinaria donde se especifican roscas métricas


Irwin Hanson 9740 Die 10 mm-1.5 1 Hex Carde


Gio
Comentado en Italia el 26 de enero de 2025
Il marchio è di per se una garanzia. Acquistato perchè volevo uno strumento compatto e robusto. In aggiunta questo è pure in classe 1. Solo il comando di bloccaggio è un po' duro ma questo garantisce un bloccaggio affidabile. Si vedrà nel tempo come si manterrà lo strumento. Nel mio caso, facendone un uso sporadico, penso proprio che non vi saranno sorprese.
Koyote Bonez
Comentado en Canadá el 1 de marzo de 2024
The description clearly says there are 3 in a package but there's only one. That seems to be blatant false advertising.
Jenny
Comentado en Canadá el 26 de febrero de 2024
Three were supposed to be three in this package. Only received one!!
S. Pramesberger
Comentado en Alemania el 3 de septiembre de 2024
Qualität und Genauigkeit zu einem zum Kaufzeitpunkt spitzen Preis von rund €13Nicht zu groß und eine angenehme Haptik durch das Metallgehäuse
Jesse A Thibert
Comentado en los Estados Unidos el 7 de junio de 2023
Saved my butt on some stripped stud threads. Would recommend
Karl Posch
Comentado en Alemania el 17 de noviembre de 2023
Perfekt für die Tischler- Hosentasche wegen geringer Grösse und runden Ecken. Stabiles Metallgehäuse. Genauigkeit wie von Sola gewohnt super.
DigiDutch
Comentado en los Países Bajos el 15 de abril de 2023
Ik had verwacht dat de behuizing van metaal zou zijn, echter was het van plastic, erg jammer.
Allen D. Reinecke
Comentado en los Estados Unidos el 1 de marzo de 2022
I needed to thread a 304 Stainless steel, 10mm OD/6mm ID tube via AliExpress to upgrade my Ryobi power washer wand, which is made from very weak aluminum.I went for an Irwin die as Irwin's taps and dies have proven performance and value per Project Farm on YT, who can be relied upon for a comprehensive and objective raft of tests.I particularly liked this hexagonal die as it can be used with a regular 1" socket and I didn't have to buy a die T-handle.I found 304 is not an easy material to machine. I tapered the end of the tube to help, after many failed attempts, but it still took forever to get the thread started; much cutting fluid, end loading and twisting! In the end, it took an hour, and an aching hand, to cut the 1 inch of thread I needed! Once finally started, the thread cutting wasn't too bad, but did require continual backing off after just an 1/8th, or at most, a 1/4 turn to break off the chips. The die, at the end of that effort, was pretty blunt and some cutting teeth were chipped.Unfortunately, I needed a thread at both ends of the tube. So, another Amazon order and the second die arrived a couple days later.Like the first one, getting the first thread started was a real chore, even after an hour's practice with the other end! I actually thought I wasn't going to get the thread cut this time, but persistence is my middle name and eventually, I got the die cutting into the tube and finished the 1 inch of M10 thread. Again, about an hour or so and an aching hand.This particular die seems to be in usable condition this time, though I don't doubt its cutting performance is reduced. It'll be good for threading softer materials and definitely for thread cleanup.The actual thread quality cut on the tube was excellent, with very little rocking of the lock nut, which goes on before the quick-release couplings are threaded on. I now have a fully functional steel wand that won't fatigue within 2 hours of waving back and forth, right at the end of the thread, like the aluminum OEM aluminum.I had intended to make two steel wands. Ryobi sent me a second power washer as they had no wands as spares under warranty. However, I don't want to be bothered wrestling two more threads! I'll just swap my home-made wand around.I can definitely recommend this Irwin die. Any other brand and I might not have finished!
Faithful
Comentado en los Estados Unidos el 4 de diciembre de 2021
5 Star Product.
Carsten Bodo
Comentado en Alemania el 4 de diciembre de 2017
Ich brauchte ein neues 3M Maßband und habe dieses gewählt weil ich nicht so ein Riesenteil wollte und das für günstig Geld. Lieferung Amazon wie immer Top. Das Maßband ist schön klein (passt in eine halbgeschlossene Hand), handlich aus Metall und sehr leicht beim aus und einziehen. Ich selbst hab nicht viele Maßbänder besessen, was mich also gewundert hatte war der Umstand, das bei diesem Maßband der Schalter dafür da ist das Maßband festzuhalten! Ich kenne das tatsächlich bei meinen alten Maßbändern nur andersrum. (Also beim ausziehen bleibt das Maßband fest, bis ich den Schalter drücke)Naja,ich finds net wild. Wie schon in anderen Rezensionen beschrieben ist das Metallband nicht so breit, was ich persönlich aber auch angenehmer finde, wobei die Schrift/Zahlen immer noch Groß genug dargestellt werden. Ich bin sehr zufrieden und kann das Modell weiterempfehlen..
Productos recomendados

Mex $170.96

Mex $ 94 .00 Mex $94.00

4.9
Elegir