Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

Interruptor de aspiradora automático, interruptor colector de polvo para herramientas eléctricas, encendido automático para evitar sobrecarga del circuito, retardo de aspiradora para una

Envío gratis en pedidos superiores a Mex $600.00

Mex $609.62

Mex $ 292 .00 Mex $292.00

En stock

Acerca de este artículo

  • Mejora la eficiencia del trabajo: retrasa automáticamente 1 s para encender la aspiradora cuando enciendes la herramienta, lo que evita la sobrecarga del circuito o el disparo. Retrasa 7 segundos para apagar la aspiradora para continuar limpiando la manguera de los desechos restantes después de que la herramienta se haya detenido, lo que reduce el ruido. Sin correr hacia adelante y hacia atrás para presionar el botón de encendido de aspiradora, esto hace que tu trabajo sea más efectivo
  • Protege tu salud: el control de encendido y apagado totalmente automático significa menos polvo. El uso del interruptor de aspiradora automatizado Etoolcity minimiza eficientemente el polvo peligroso en el aire para proteger tu pulmón, y ayuda a cumplir con los requisitos OSHA para el control de polvo
  • Compatibilidad: el interruptor colector de polvo Etoolcity soporta una amplia gama de herramientas de corte, desde dispositivos giratorios de mano hasta sierras grandes como sierras ingletadoras, sierras de mesa, lijadoras eléctricas, enrutadores, carpinteras, cepilladoras, etc. La clasificación máxima del motor no debe superar los 120 V/15 A 50/60 Hz, 1875 W
  • Material superior que hace duradero: adopta un cable de alimentación estándar estadounidense certificado UL de 14 AWG que permite el paso con una gran corriente de más de 30 A. Cubierto con material ignífugo de grado PC + ABS V0, núcleo de cobre grueso, alambre más grueso, menos calor durante el uso y prolonga la vida útil. Un imprescindible para la seguridad en el taller
  • Fácil de usar: interruptor de aspiradora Etoolcity muy fácil de usar en solo 3 sencillos pasos, simplemente conéctalo y estarás listo para usar. El texto de la salida de aspiradora y la salida de herramientas, etc. están claramente impresos en la superficie para asegurarte de conectar la herramienta y aspirar en el enchufe correcto



Descripción del producto

1
3 pasos fáciles de usar

¿Por qué necesitas un interruptor de aspiradora automático?

Elimina la distracción de alcanzar una aspiradora mientras trabaja con herramientas eléctricas potencialmente peligrosas. Garantiza que el polvo y los desechos se recojan mientras cortas, en lugar de ser limpiados con mayor dificultad después de que se haya hecho el desorden. Minimiza el polvo peligroso en el aire que puede provocar una variedad de dolencias.

Especificaciones:

SALIDA DE HERRAMIENTAS EL

- Conexión de salida de herramientas: Enchufe de 2 o 3 clavijas.

-Máx. La clasificación del motor no debe exceder los 120 V/15 A o 220 V/10 A, 50/60 Hz, 1875 W.

experiencia de trabajo segura, eficiente y saludable

El paquete incluye:

1 interruptor de aspiradora automático con cable de alimentación de 15 pulgadas

3 tornillos de montaje

1 instrucciones de instalación


Russ McGuire
Comentado en los Estados Unidos el 28 de enero de 2025
Works as advertised. Saves time and effort. I went from turning on the dust collector, sawing, turning off the collector to just sawing. Now, the collector comes on when needed and turns off a few seconds after I'm done.
Edward Damas
Comentado en los Estados Unidos el 11 de abril de 2025
Works well. Meets my expectations. I don't know about the more expensive ones being sold, but for the lowest price out there, this works.
EDAFON
Comentado en México el 22 de agosto de 2024
Al conectar la aspiradora nunca encendió. Lo terminé devolviendo.
TimMan
Comentado en los Estados Unidos el 19 de julio de 2024
I purchased this vacuum switch to control my shop vac and some additional fans that I had placed inside of a soundproof enclosure. This vacuum switch works perfectly. When I turn on the vacuum, a second later, the fans turn on and help to cool the vacuum inside of the enclosure. When the vacuum power is turned off, The fans continue to run for seven seconds which helps to exhaust any hot air from the vacuum that might be inside of the enclosure.One comment about this vacuum switch is that the cable is pretty short. At 18 inches, you’ll need some sort of additional extension cord in order to connect AC power to the switch.One other comment is that the vacuum switch only has a single AC power cord. This means that both your vacuum control outlet as well as the power tool control outlet are both being powered from the same AC cord. So, make sure that the total power requirements of your two tools (vacuum plus other power tool) do not exceed the total power limits listed for this product.The footprint of the switch is pretty small and fits perfectly into my vacuum enclosure that I made.I also feel that the price charged for this vacuum switch makes this product a great value.Based on my usage of this vacuum switch, I recommend this product for your home shop with the understanding that your total power needs do not exceed the power specs of the product.T
Urabus
Comentado en los Estados Unidos el 25 de diciembre de 2024
I use the device to control a fan inside an enclosed microwave oven cabinet. It works well but there is a 5 second delay after the microwave stops before it shuts off the fan. It also turns the fan on randomly for a few seconds about 3 times per week. Neither is a problem for my application but it did cause me to take a star off the rating.
ycore2k2
Comentado en los Estados Unidos el 19 de junio de 2023
So I decided to make a ShopVac / Oneida Cyclone dust collection setup for moving around my shop and using with hand sanders etc. I can even hook it up to my table saw, router table etc. I am currently having to run everything off of a 115VAC 15 Amp circuit and this thing makes it so that all I have to do is turn on my tool that I'm working with and after about a 1 to 2 second delay, the dust collector kicks on. When I'm done, turn off the tool and several seconds later the dust collector turns off automatically. This keeps me from tripping breakers from turning them both on at the same time and drawing too much amperage. And the delay after turn off the tool lets the dust collector pull the remaining debris from my tool and hose before shutting off. Works like a charm. The only downfall is that there is only one plug for the tool to plug into and one plug for the delay (dust collector). This is easily solved by putting a power strip into the tool plug. Then, any tool that you turn on will then kick on the dust collector. You just have to remember to move the hose from the collector to whatever tool is being used. It has a couple of holes on it so you can mount it to a surface of something, like I did for my mobile dust collection cart. This does NOT have a wireless remote control. It is only triggered from the voltage draw of turning on whatever tool you are using that is plugged into it. But it works flawlessly and I would highly recommend for any situation where you need a second powered item to power on after a first power item is turned on and then turn off automatically shortly after the original tool is turned off. Price is great too.
Productos recomendados

Mex $647.81

Mex $ 336 .00 Mex $336.00

4.5
Elegir

Mex $604.01

Mex $ 302 .00 Mex $302.00

5.0
Elegir

Mex $335.00

Mex $ 154 .00 Mex $154.00

4.3
Elegir

Mex $178.00

Mex $ 94 .00 Mex $94.00

4.6
Elegir

Mex $379.50

Mex $ 193 .00 Mex $193.00

4.5
Elegir