Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

Interruptor basculante impermeable para barco con luz indicadora verde, 2 unidades, CA 16 A/250 V, 20 A/125 V 2 posiciones

Envío gratis en pedidos superiores a Mex $600.00

Mex $164.04

Mex $ 91 .00 Mex $91.00

En stock

Acerca de este artículo

  • Nombre del producto: interruptor basculante; polos: DPST; terminales: 4 pines; color: negro, verde; material: plástico, metal
  • Posición: encendido/apagado; color de la lámpara: verde; Voltaje nominal: CA 16A 250V, CA 20A 125V; Tamaño total: 37 x 28 x 40mm
  • Fácil de usar: estos interruptores encajan en su lugar para que puedas reemplazar tus interruptores viejos o dañados con poco esfuerzo. Es un interruptor de tiro único de un solo polo, lo que significa que puedes controlar una acción/artículo con solo pulsar el interruptor.
  • Ampliamente aplicado para controlar todo tipo de electrodomésticos como dispensador de agua, cinta de correr, cafetera, etc.
  • Contenido del paquete: 2 interruptores basculantes



Descripción del producto

1
2

6P verde

1. Clasificación: 16A125/250VCA 16(8) A 250VCA

2. Circuito: encendido/apagado

3. Resistencia al contacto: 30 m OHMS Max

4. Resistencia al aislamiento: DC5OOV 100 MOHMS Min

5. Voltaje de retención: CA 1500 V 1 minuto

6. Vida eléctrica: 10000 ciclos a carga completa

7. Fuerza de funcionamiento: 1000 ~ 1500 gf

8. Rango de temperatura de funcionamiento: -25~+85

4

6P rojo

1. Clasificación: 16A125/250VCA 16(8) A 250VCA

2. Circuito: encendido/apagado

3. Resistencia al contacto: 30 m OHMS Max

4. Resistencia al aislamiento: DC5OOV 100 MOHMS Min

5. Voltaje de retención: CA 1500 V 1 minuto

6. Vida eléctrica: 10000 ciclos a carga completa

7. Fuerza de funcionamiento: 1000 ~ 1500 gf

8. Rango de temperatura de funcionamiento: -25~+85

3

Verde 4P

1. Clasificación: 16A125/250VCA 16(8) A 250VCA

2. Circuito: encendido/apagado

3. Resistencia al contacto: 30 m OHMS Max

4. Resistencia al aislamiento: DC5OOV 100 MOHMS Min

5. Voltaje de retención: CA 1500 V 1 minuto

6. Vida eléctrica: 10000 ciclos a carga completa

7. Fuerza de funcionamiento: 1000 ~ 1500 gf

8. Rango de temperatura de funcionamiento: -25~+85

5

4P rojo

1. Clasificación: 16A125/250VCA 16(8) A 250VCA

2. Circuito: encendido/apagado

3. Resistencia al contacto: 30 m OHMS Max

4. Resistencia al aislamiento: DC5OOV 100 MOHMS Min

5. Voltaje de retención: CA 1500 V 1 minuto

6. Vida eléctrica: 10000 ciclos a carga completa

7. Fuerza de funcionamiento: 1000 ~ 1500 gf

8. Rango de temperatura de funcionamiento: -25~+85

6

8

Luces LED

9

Hebilla simple

10

tentáculos de plata

7

Dwt
Comentado en los Estados Unidos el 10 de abril de 2025
Nice switches seem well sealed would buy again
Pedro
Comentado en México el 28 de enero de 2024
Son muy buenos interruptores, siempre he preferido usar los de este tipo para un sinnúmero de aplicaciones, en realidad merecen 5 estrellas en términos prácticos, pero su defecto a mi parecer es el precio ($164 x 2 unidades), estos los compro comúnmente por cantidades mayores a 10 en el centro de CDMX donde los encuentro más baratos (aproximadamente 33% más baratos), pero esta vez sólo necesitaba dos y era más económico adquirirlos en Amazon que transportarme sólo para comprar 2 unidades. En cuanto a funcionamiento, los interruptores son adecuados para los usos descritos en su publicación.
Robert
Comentado en los Estados Unidos el 2 de octubre de 2023
The power switch for my Powermatic model 014 Oscillating Spindle Sander failed. I needed a 120v replacement switch that could handle the amperage. And I wanted the replacement to "fit" without having to make any/many modifications to the housing. The width of the switch was perfect, and the rubber boot helps with the switch's slightly undersized height. High quality component, great replacement.
Peter Jay
Comentado en los Estados Unidos el 14 de septiembre de 2023
Indicator light works just fine, as does the switch. Not sure of others' issues with these, but on 120V this is working perfectly.Used to replace the failed power switch on a waffle maker that was of the same type and size. Fits fine. Opening in panel was a bit tight but I'm sure it's the panel and not the switch. I did get it installed OK and it's working great. And I now have a spare, coz this came in a pack of 2.For the person who took off stars because both poles need to be wired for the light to work: that's the way these things are! The lighted wall switches that don't need both poles work because of the voltage between the pins causes the switch to light up ONLY WHEN THE SWITCH IS OFF. This is NOT that type of switch. Needs full voltage to light up.
Customer
Comentado en los Estados Unidos el 29 de mayo de 2021
Solution, wire both sides of the switch. Terminal 1 & 2 hot; terminals 3 & 4 neutralI purchased multiple of these switches and I can't get any of them to light up. I am switching a fan on/off using the hot leg of the wire across terminals 1 & 2. I have also tried terminals 4 & 5. The fan works perfectly, but no light no matter how it is wired. This is a 120vac circuit.
Kotori
Comentado en los Estados Unidos el 29 de marzo de 2020
Great switch at a great price. The order did come with two units, I only needed one for my project. There is a booty around the switch itself which gives it a feeling of water restriction, but I haven't tested this. I used my switch for turning the 120v mains supply off and on for a brew controller on a 20A circuit. I haven't noticed any unusual heating from the switch or any of the surrounding components, though I think I'm using this switch right inside its parameters.My switch is green and exudes a lovely green aura that draws my kids in and begs them to toggle it, so beware :)
Productos recomendados