No hay artículos en el carro
No hay artículos en el carroChar
Comentado en Canadá el 4 de agosto de 2024
Great product
317721
Comentado en los Estados Unidos el 19 de enero de 2024
I needed two extensions for 2×4 electrical boxes when I added 1/4 inch pegboard to a wall, spaced 3/4 inch off the wall, so in toto, I had a one-inch gap to fill. These worked very well. They fit over the existing receptacles -- one was a wider GFCI receptacle -- without difficulty. The extensions slipped into the existing box with no difficulty, making the existing box with the extension was only slightly narrower. The "ears" on the top and bottom of the extension were plenty wide to seat properly on the pegboard. It made a nice, clean installation.The extensions seem quite robust, but they are also a bit flexible, making maneuvering them over the receptacles easier.They included two 2-inch 6-32 phillips-head flat head screws, and they also seemed good quality. Phillips head, made them easier to drive.I am very satisfied. I can think of no disadvantages.
R & J McHum
Comentado en Canadá el 28 de septiembre de 2024
Did exactly want I needed it to do. Recommended.
Jason
Comentado en Canadá el 19 de febrero de 2022
Tiled a back splash in the hitchen and need a box extender. The metal ones from local shops didn't fit well. These plastic ones are fantastic. Slightly tapered so they slide in no issues and fit tight.
Telecom
Comentado en los Estados Unidos el 24 de diciembre de 2020
The plastic is thin but once everything is installed, that shouldn't be a problem. These worked for outlets that had been installed for 1/2" sheetrock but 5/8" was required, fitting into the existing outlet box nicely as well as outlets that had been installed to the 2X4's but after sheet rock was applied, both a wainscotting and a 1/2" trim kickboard had been installed on top of it. These filled the space, extending the outlet box and helped stabilize the outlet when a metal cover was installed with it, leaving reduced concerns about the previously existing gaps. I've already used them to correct other outlets and switch boxes I've found with this problem.
Productos recomendados