No hay artículos en el carro
No hay artículos en el carro Piezas de la caja de polvo del tanque de agua, compatibles con Xiaomi Mijia G1 MJSTG1 Mi Robot Vacuum
Hola, amoroso comprador, bienvenido a mi tienda. Si no está seguro de si este producto es adecuado para su aspiradora, contáctenos y le daremos una respuesta satisfactoria. Gracias por tu apoyo
Michael W. Robinson
Comentado en los Estados Unidos el 13 de agosto de 2024
I purchased the Hotop 24VAC 40VA plug in transformer to replace the 25.5VAC 25VA plug in power supply that came with my Rainbird ESP-Me irrigation controller. The original power supplies are notorious for breaking, and used ones in good condition go for $70 on EBay. The Hotop plug in transformer is a little over-rated for what the Rainbird system needed, but the Hotop was one of the very few 3 prong grounded 120VAC inputs with a 3 wire 24VAC grounded output that I was able to find to match the original Rainbird power supply. I used the 3 wire cord from the original supply and connected it to the 24VAC screw terminals on the back of the transformer case. The measured voltage output from the Hotop read 27VAC with 124VAC input from my house outlet. The original power supply (25.5VAC output) supplied 29VAC, so I'm not worried as the 27VAC is within the range of the 24VAC control valves in my system. Excellent product for an excellent price.
Art Vandelay
Comentado en los Estados Unidos el 29 de septiembre de 2024
I installed a Nest Thermostat (the basic non-Learning one) in my home, but was unable to use the transformer on my zone controller - it was way too old and not outputting nearly enough power to keep the thermostat on. This solves the problem! If you have the same problem (2-wire heat only, no Common wire) here's how to power your thermostat. Doing it this way, you'll plug in the transformer near your furnace and won't have to have the wire or transformer visible from your living space. You will need:1. A transformer (this item)2. A Nest Power Connector3. Nest Thermostat already installed and firmware updated4. Pages 10-11 of the Nest Power Connector Pro Installation Guide - The "Pro" guide has the necessary info for installing with an external transformer, the basic version does not.5. Some 18/2 thermostat wire to connect the transformer to the Nest Power Connector.Good luck!
LASounD
Comentado en Canadá el 21 de marzo de 2023
Nest doorbell
jeffrey ryder
Comentado en Canadá el 17 de diciembre de 2020
used it for vintage diner wallbox re for jukebox
joe444
Comentado en Canadá el 30 de noviembre de 2020
Works fine with the Ring Doorbell Pro, keep in mind you need to attach the Ring DoorBell Pro PowerPAK unit to the same pins as the power wires just as if this was a standard doorbell transformer. It comes with a three pin out but just used the far Left and far Right pins for the Ring DoorBell Pro wires.
Productos recomendados
Mex $2,899.99
Mex $ 1,362 .00 Mex $1,362.00
Mex $16,348.92
Mex $ 1,881 .00 Mex $1,881.00