Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

Honeywell C7189U1005 Sensor de Temperatura Remoto para Interiores Color Blanco para Termostatos Th7000 y Th8000

Envío gratis en pedidos superiores a Mex $600.00

Mex $446.43

Mex $ 200 .00 Mex $200.00

En stock
  • Se utiliza para detectar la temperatura si el termostato está instalado en una ubicación baja de detección de temperatura.
  • Sensor remoto pequeño de temperatura para que coordine con la decoración de cualquier habitación.
  • Calibrado de fábrica; no requiere calibración de campo.
  • Funciona con un tendido de cable máximo de 61 metros.


Descripción de características: Sensor remoto para interiores para aplicaciones de detección remotas. Aplicación: Sensor de temperatura remoto para interiores para los termostatos VisionPRO y VisionPRO IAQ. Color: Blanco Básico. Dimensiones:3.8 cm de ancho x 5.7 cm alto x 1.9 cm de profundidad. Dimensiones (mm) 38 mm de ancho x 57 mm de alto x 19 mm de profundidad. Montaje: Se monta directamente en la pared utilizando tornillos y anclajes previstos. Rango de ajuste de temperatura (F): Referirse a los termostatos VisionPro. Rango de ajuste de temperatura (C): Referirse a los termostatos VisionPro. Rango de humedad de operación (RH): 5 a 95 RH. Rango de temperatura de no condensación, ambiente (F): 45F a 88F. Rango de temperatura, ambiente (C): 7 °C a 32 °C. Utilizado con: Termostatos de la serie VisionPRO y VisionPRO IAQ. Utilizado con: Termostatos de la serie VisionPRO. Valor Tradeline: El sensor Tradeline necesita ser posicionado dentro un rango de 76 m del termostato.


Steven DeMarco
Comentado en los Estados Unidos el 7 de abril de 2025
Fast and great value. Works perfect
Jeffrey F.
Comentado en los Estados Unidos el 18 de junio de 2024
This wired remote tells the VisionPro thermostat the temp, in any indoor space, where the remote is mounted. It does not sense humidity. I put one in my master bedroom, because the thermostat was in a non-related hallway (not even served by the same heat pump). You'll need to program your thermostat to use the wired remote temp sensor. If you don't have the installer pamphlet that came with your thermostat, search the model number online and find a manual for installer programming. The code to enter programming is on the back of the thermostat, when you remove it from the sub-base. There will be a sticker with four digits. If you can't run a two conductor cable from your thermostat to this remote temp sensor, you can buy a wireless indoor remote temp sensor, instead. I also recommend adding a wireless outdoor temp sensor. With an outdoor sensor, you can program your thermostat(s) to lock out electric or other aux heat above a certain outside temperature. That's the only way you can prevent aux heat from turning on, when you raise the temperature setting manually by 2° or more. A single outside wireless temp sensor can be associated with multiple VisionPro thermostats in a house. For any of the wireless accessories, make sure your VisionPro has the RedLink feature. (Most do.)
Brent Davis
Comentado en los Estados Unidos el 11 de agosto de 2023
We have these all over our campus on Ecobee thermostats and they work well. We only have to adjust the sensor if the wire run is long. I took off a star because once they are mounted to the wall, the cover seems to come loose with very little pressure—even when we barely tighten the mounting screws.
The Tech Guy
Comentado en Canadá el 15 de mayo de 2019
This is the perfect remote temperature sensor for Honeywell Lyric T-6 Pro Thermostats.It's easy to install and needs to be hardwired back to the thermostat with two wires.Programming my Honeywell T-6 thermostat to recognize this remote temperature sensor was easy and once installed and programmed my Thermostat now reads the temperature in our bedroom as opposed to the temperature on the main floor hallway. This makes heating and cooling much better in our home and solved the Too Hot or Too Cold temperature issues we were having.Yes I would recommend this sensor ... I just wish it was $25 instead of $50 since there's really not much to it.
Todd Riley
Comentado en Canadá el 9 de octubre de 2019
I ordered these for one of my customers after going to my wholesale heating supplier and was told it would be a month to get the wired sensors. I ordered these on a Tuesday and I had them in my hand That Friday before noon and pretty much the same price more or less.I'm happy
Productos recomendados

Mex $451.50

Mex $ 212 .00 Mex $212.00

5.0
Elegir

Mex $251.32

Mex $ 125 .00 Mex $125.00

4.7
Elegir

Mex $111.98

Mex $ 59 .00 Mex $59.00

4.7
Elegir