No hay artículos en el carro
No hay artículos en el carroMaterial de alta calidad: este cuerpo está hecho de materiales de PVC de alta calidad. Menos luz con cuerpo más fuerte.
Matthew C
Comentado en los Estados Unidos el 19 de marzo de 2025
I've been dry-cutting a lot of concrete and sandstone recently. This shroud is awesome. Even though I'm working outside with a respirator, collecting the dust makes clean-up a lot easier. I would suggest this shroud!
woodworking senior citizen
Comentado en los Estados Unidos el 11 de febrero de 2025
Recently I've been cutting a lot of "Hardie" fiber cement products. Circular saw blades for this purpose are expensive and the work is very dusty, even with dust collection on the saw. Using an angle grinder with a cutting blade, either a diamond or embedded carbide blade, can be both faster and cleaner. This shroud even come with a good diamond blade.I deducted one star because It does not work with my older Bosch grinder (but they openly stated that it only works with about 80% of grinder models!) It does work well with my newer cordless grinders. By using a very shallow depth of cut and working on a sheet of styrofoam insulation as a backer I get a nearly dust free cut when using a synchronised shop vac dust collection system.
Tim
Comentado en los Estados Unidos el 3 de enero de 2025
I was really excited about this product. So excited I almost reached out to a buddy that is still fabricating.And then I started working with the shroud. I am a right handed person that controls the grinder with my right hand. That is where the torque and resistance etc are. The blade also blows the sparks etc away from me this way.This rig puts requires me to use my left hand as primary on the grinder. I like the idea, but I don't think the product was well thought out.
Stephanie
Comentado en los Estados Unidos el 28 de enero de 2025
This is great for dust and particulate control. I love how adjustable it is, really turns your angle grinder into a mini circular saw. You can adjust the depth of the cut and you can adjust where the line guide is depending on what blade you are using which I think is awesome and really helpful. The wheels on the front and the guide makes it super easy to cut long straight lines and not have to worry about cutting at an angle or getting off track, you can clamp a straight edge to the project and get a super straight cut. The only thing you lose with this is the visibility of the blade because the plastic, even though it's clear, only allows you to see the blade at particular spots. It takes a hot minute to put together but I do like that the part that connects to the grinder can hinge outside of the shroud for easy access.I love this to help control the dust for cutting cement board and stuff that just makes a lot of dust while making long straight cuts.
John
Comentado en los Estados Unidos el 24 de enero de 2025
I'm always amazed by how many terrible conditions could be prevented by eliminating dust, this dust collector shroud is a great start but there are a couple of omissions that it really should have; to use the shroud you need to remove the grinders guard so you end up with no metal guard around the grinder wheel while this is in place. The instructions do say to only use this with a diamond wheel but I feel like it would be so much better if it had a built in metal guard. When using the shroud I found it good to be at the side of the tool to see the cut and stay clear of any danger from the blade, so long as the shroud is touching the work piece, the vacuum collects the dust really well, I still used a respirator as well and would recommend the same.The vacuum connector worked really well for connecting to a shop vac with a hepa filter.
Productos recomendados
Mex $473.78
Mex $ 236 .00 Mex $236.00
Mex $1,891.63
Mex $ 907 .00 Mex $907.00
Mex $125.62
Mex $ 71 .00 Mex $71.00
Mex $417.07
Mex $ 212 .00 Mex $212.00
Mex $819.00
Mex $ 376 .00 Mex $376.00
Mex $3,788.98
Mex $ 1,629 .00 Mex $1,629.00