Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

Freud LU87R012: Hoja de rasgado de 30 cm x 30T

Envío gratis en pedidos superiores a Mex $600.00

Mex $1,753.38

Mex $ 876 .00 Mex $876.00

En stock

1.Nombredelestilo:Impresión Dorada + Juego De Cortadores Dorados


Acerca de este artículo

  • Hoja de sierra de corte fino ATB de 30 dientes de 12 pulgadas
  • Hoja de sierra de corte fino ATB de 30 dientes de 12 pulgadas
  • Hoja de sierra de corte fino ATB de 30 dientes de 12 pulgadas
  • Hoja de sierra de corte fino ATB de 30 dientes de 12 pulgadas
  • Hoja de sierra de corte fino ATB de 30 dientes de 12 pulgadas


Esta cuchilla le da nueva vida a las sierras de mesa con poca potencia y a las sierras de brazo radial porque la hoja delgada no requiere mucha potencia. El revestimiento Perma-SHIELD ™ ayuda a esta cuchilla a jalar 1/3 menos de la sierra, lo que se traduce en un 33% más de poder de corte. El rango de trabajo ideal es de 3/4 "a 2-3 / 4" de espesor. Diámetro de la hoja de 12 ", eje de 1", 30 dientes, esmerilado plano, .094 "Kerf (K), ángulo de gancho de 20 °, placa de .071" (P) Ideal para: Cuchillas de rasgadura para trabajo pesado para sierras de baja potencia. Profundidad de corte (3/4 "a 2-3 / 4"). Aplicación: Ripping. Hecho en Italia.


Manuel
Comentado en los Estados Unidos el 20 de abril de 2024
La relación costo beneficio es excelente!
José
Comentado en México el 5 de agosto de 2023
Llego a tiempo y en buenas condiciones.
Blaine Geddes
Comentado en Canadá el 13 de julio de 2021
This blade is specified and labelled as 12", but it is not 12" it is 300 mm. My application for it was to rip some 4" oak timbers. My table saw will just cut to a depth of 4" with a 12" blade, but with this blade the depth of cut is only a little over 3 7/8", so I have to make two passes for the full 4" depth.It does rip 3 7/8" oak well, producing a smooth cut with no burning and a little power to spare on a 3 HP saw. The thin kerf nicely minimizes waste.I switched to a Royce Ayr blade (made in Canada) that is a true 12". The Royce blade cuts at least as well as the Freud or slightly better and it goes all the way through my 4" stock. The carbide teeth on the Freud blade appear to not have as much side clearance angle as the Royce, so even though the Royce blade is thicker it seems to use a bit less saw power. Both blades produce overall excellent cuts with a smooth finish.To the folks at Freud, 1" = 25.4 mm (don't drop that 0.4), so 12" = 304.8 mm (NOT 300 mm). Freud should label and advertise this blade for what it is and not round the dimensions and relabel an undersized blade.
Carlos M.
Comentado en los Estados Unidos el 20 de enero de 2020
El producto muy bueno y de bajo costo, en la actualidad lo uso en un taller de carpinteria en Colombia, se los recomiendopara que lo incluyan en sus proyectos de trabajo.
Rogelio M.
Comentado en México el 5 de febrero de 2019
El disco corta muy bien, su diseño disminuye considerablemente el ruido, el hecho de ser de espesor delgado hace que los cortes sean mas finos y suaves, yo lo uso para cortes transversales y longitudinales.
JKL
Comentado en los Estados Unidos el 29 de septiembre de 2016
I bought a 10 inch for an older craftsman saw with a 2 hp replacement motor that had died. I ripped 8/4 seasoned red oak very easily and edges were very smooth. I now ordered this for my 12 inch table saw so as to be able to rip even thicker stock. Very impressed and very happy with the price. Highly recommend!
Daniel Smith
Comentado en los Estados Unidos el 21 de abril de 2013
I have always liked the quality of Freud products, their saw blades have top quality carbide teeth, much larger than many other brands (they will allow for longer life & more times for sharpening) the hardness of the carbide holds a very sharp edge, the PermaShield coating helps the blade smoothly cut through all of the species of wood I work with, the thin kerf is great for many of the smaller "contractor" saws w/smaller motors.It ripped through the oak lumber I used on the last project like a "hot knife through butter"- the only downside is when I run into a piece of knotty hickory or some species with twisted grain-for those times I use my full kerf blades with my cabinet saw- bottom line, take it from 30+ years of "Heirloom quality" woodworking experience, you won't go wrong with Freud or Amazon
Productos recomendados

Mex $234.00

Mex $ 121 .00 Mex $121.00

4.5
Elegir

Mex $235.67

Mex $ 122 .00 Mex $122.00

4.7
Elegir

Mex $1,391.52

Mex $ 695 .00 Mex $695.00

4.8
Elegir

Mex $666.90

Mex $ 313 .00 Mex $313.00

4.4
Elegir