No hay artículos en el carro
No hay artículos en el carroEsta cuchilla recubierta con Perma-SHIELD ™ le da nueva vida a las sierras de poca potencia y produce cortes suaves en maderas duras, maderas blandas y molduras. Las cuchillas recubiertas tiran 1/3 menos de la sierra, lo que se traduce en un 33% más de potencia de corte. Las cuchillas de corte fino quitan menos material que las cuchillas de carburo estándar, por lo que requieren menos potencia para producir resultados igualmente buenos.
Cliente de
Comentado en México el 29 de marzo de 2024
Es el peor disco que compré un lado me lo deja decente pero el otro lo deja todo desgarrado, me atrevo a decir que tengo un Truper que me deja mejor acabado que este
coopster
Comentado en Australia el 21 de marzo de 2024
cuts a nice thin kerf and leaves a very smooth finish although there is a little bit of tear-out on the exit side of the cut ... nothing a bit of tape or sacrificial board wouldn't solve.
Bri55
Comentado en Canadá el 30 de junio de 2023
This blade has improved my tablesaw so much! I replaced my old conventional width carbide tooth blade and the improvement is so obvious. No more burning and far less dust. It doesn’t work the saw nearly as hard as the old blade did. I should have bought this blade years ago.
Graeme Flynn
Comentado en Australia el 9 de febrero de 2023
After dealing with the standard Dewalt blades, I'd wish I had of bought this blade from the beginning.
Oscar Delgado M
Comentado en México el 7 de diciembre de 2023
Estos discos son garantía, no hace falta comentar mucho.
AGRIPIN SANCHEZ SALINAS
Comentado en México el 24 de enero de 2021
Cumple perfectamente connsu trabajo, cortes muy limpios.
Ramón Hernández
Comentado en México el 13 de abril de 2021
El producto excelente revivió mi vieja radial craftsman corte muy fino y muy silencioso excelente compra
Alfonso
Comentado en México el 23 de enero de 2020
Descripción del producto imprecisa porque menciona que el arbor es de 5/8" y en otra parte menciona que es de 1".
Osiris Uribe
Comentado en México el 4 de junio de 2019
Buen producto si lo encuentras a buen precio ya que cambia constantemente,
Daniel Casanova
Comentado en México el 22 de mayo de 2019
Excelente calidad muy buenos cortes de inglete
paul turenne
Comentado en Canadá el 5 de marzo de 2014
My first saw blade for my tablesaw was a Freud rip blade and crosscut blade (the old black teflon coated ones) which was over 18 years ago.I decided I was in need of a new crosscut blade and did my home work and Freud came up several times ,and since I`ve used this brand before (as well as others) I decided to order it.Amazon delivered quickly as usual and free shipping by UPS (gotta love that)The blade is extremely sharp out of the package and very well made.I`m building a bed side table from Cherry and Hard Maple and must say ,this blade performs very very well indeed.The cuts are smooth ,no burning and no tear out ,absolutely perfect !!Normally I use a backer board when crosscutting to prevent tear out ,this time I didn`t and the cuts were flawless (although it is still a good idea to use a backer regardless)With my Incra miter gage and the tablesaw set up properly , the cuts are a perfect 90°I would recommend this blade to anybody.Paul T
Ben
Comentado en los Estados Unidos el 18 de abril de 2014
I got this Freud LU88R009 blade for my Craftsman 9 inch radial arm saw from 1972 after reading positive reviews here on Amazon. I got the saw for free about 8 years ago and never set it up until recently. It came with 3 blades. The first 2 blades smoked my garage out and the 3rd one (which was never used before me) cuts without burning but the cut is not very clean. So now I start looking for 9 inch blades. It wasn't as easy as I thought since no one really carries 9 inch blades anymore. Thankfully there are some companies that still make them and Amazon carries them. I chose this Freud blade for price and versatility. The blade crosscuts so much better than what I had and is incredibly quiet compared to the old Craftsman Chisel Tooth hss blade that was in there. It leaves a very clean cut with an almost shiny surface in the hard maple I've been working with. This blade, for me anyway, still leaves a tiny bit of tear out on the bottom of the cut and some circular marks on the cutting surface but it's so much better than what I had and the tear out is so minimal that it cleans right up with a couple strokes of 150 grit sandpaper. Of course, some of that could be my technique and learning curve with this machine. If you get this blade for a RAS be prepared for it to pull aggressively through the cut. It may catch you by surprise. I also made some small rip cuts with this blade the results were just as good, if not better, than the crosscuts. This is not to say that it should be used this way as I don't think that was the manufacturers intention but it does do a great job. I will eventually get the LU87R009 for ripping so I can have the best of both. These will definitely be my go to blade for important cuts while I can still use that old Craftsman blade for junk cuts so I can enjoy the pleasure of the Freud blade for a long time.
Productos recomendados
Mex $247.96
Mex $ 146 .00 Mex $146.00
Mex $695.00
Mex $ 347 .00 Mex $347.00
Mex $179.00
Mex $ 89 .00 Mex $89.00
Mex $1,061.02
Mex $ 541 .00 Mex $541.00