No hay artículos en el carro
No hay artículos en el carro ▶1. Corte láser
La forma áspera de la llave está cortada con láser a partir de una hoja sólida de acero al cromo-molibdeno 4140.
▶2. Fresado CNC
Las mandíbulas de la llave y las superficies exteriores están mecanizadas con una tolerancia precisa. La unidad cuadrada está ancha y los retenes están perforados.
▶3. Tratamiento térmico
La llave está tratada térmicamente para producir una pieza resistente con una dureza de HRC 44-46.
▶4. Chapado en cromo.
Las llaves están pulidas y luego chapadas con una combinación de níquel dúplex y cromo microporoso para un acabado suave y resistente al óxido.
Gary Thomas Fitschen
Comentado en los Estados Unidos el 12 de marzo de 2025
Perfect for what I needed it for.
No pen name
Comentado en los Estados Unidos el 3 de febrero de 2025
This crowsfoot didn't work for my application because of its thickness. It is 0.428 inch thick (a little less than 7/16 inch or 11 mm) thick. Both the open end of my old Craftsman combination wrench and regular crowsfoot were only 0.330 inch thick. I was trying to loosen a flarenut adjacent to a right angle bend in a power steering pressure line. Fortunately, the old combination loosened the flare nut without any damage. Also, if one were trying to use it in a tight spot, the lack of any taper coming into the square hole for a 3/8 extension might make it less user friendly.
Raymond Howell
Comentado en los Estados Unidos el 10 de febrero de 2025
Only used it a few times but it saved me a bunch of money and it works fantastic and I still have it but don't want it to anybody because it never finds its way home
Danny Griffis
Comentado en los Estados Unidos el 11 de junio de 2024
The heat design prevents slippage on nuts & bolts. No problems at this time.
Lakemechanic
Comentado en los Estados Unidos el 20 de noviembre de 2024
Long ago, about 1972is, I bought a set of Craftsman inch flair nut wrenches & over the years they have served me well. ...but now I need a 10mm metric flair nut wrench & Craftsman isn't what it once was. I read a lot of reviews & it appears that unless one wants to sell their firstborn child, a sloppy fit that rounds flair nuts is what one gets. I bought both a 10mm crowfoot flair nut wrench, ASIN B0B799SMXL, and a combination 8/10mm flair nut wrench, ASIN B093S65KYH.On my cars brake line flair nuts the crowfoot was tight with no discernable play & my micrometer says the flats are 10.09mm apart. The combination 8/10 mm flair nut wrench is definitely sloppy & my micrometer says the flats are 10.26mm apart. I haven't done the brake job yet, so I can't say if sloppy is too sloppy. If it is, expect an update to this review.Crowfoot ASIN B0B799SMXL highly recommendedCombination ASIN B093S65KYH iffy
Productos recomendados
Mex $225.41
Mex $ 121 .00 Mex $121.00
Mex $1,758.46
Mex $ 879 .00 Mex $879.00