No hay artículos en el carro
No hay artículos en el carroMás información del producto
Sobre nosotros
Freud es el fabricante de herramientas para trabajar la madera en el mundo que produce su propio carburo de micrograno con titanio, llamado TiCo, una combinación de alta densidad de titanio y cobalto. Al producir su propio carburo, Freud tiene la capacidad única de formular cada herramienta para cada aplicación específica, maximizando así la vida útil de corte y el rendimiento de la herramienta. La línea completa de herramientas de carpintería de alta calidad de Freud incluye hojas de sierra, brocas de fresador, cortadores moldeadores y mucho más.
Jack L. Langdon
Comentado en los Estados Unidos el 2 de mayo de 2019
Needed a 2 inch deep cut so bought the tall version. This tool is very unbalanced and the router in the shop where I work has no speed adjustment.. Too much vibration to use it. Probably a good tool for a beefy industrial router with speed control. Don't buy it for any router without a speed control. One might question why a tool advertised for high feed rates need to run at low rpm.
Mark Hamburg
Comentado en los Estados Unidos el 19 de febrero de 2019
Though the package rates the bit at 24,000 rpm (less than 1" diameter), there was significant vibration - likely due to the 2" length (run-out in the router / bit is magnified in the longer bits). Just slow it down, mine ran fine at half-speed (~12,000 rpm), take your time and take smaller bites, and you will be pleased with the performance. I would have given it a 5-star rating if they included the suggestion to reduce RPM to eliminate vibration.
Jmatt
Comentado en los Estados Unidos el 29 de abril de 2017
Cuts well, makes lots of chips like it's supposed to. Durability seems to be good
ChuckB
Comentado en los Estados Unidos el 10 de mayo de 2015
This is a good router bit. I never had a single flute bit before and found that the cut was very smooth and easy. There was a bit of vibration, probably caused by the single cutting edge but, overall, I am well pleased with the performance. Also, the price was very reasonable for a 1/2" bit. The bit was made in Italy and sold by a respected company, Freud. Good buy.
TerryC
Comentado en los Estados Unidos el 21 de octubre de 2015
The blade was 0.012" less than a 1/4". This is not what you want in a blade when making box joint corners! I would not buy this again.
Productos recomendados
Mex $1,356.93
Mex $ 610 .00 Mex $610.00
Mex $376.03
Mex $ 195 .00 Mex $195.00
Mex $289.24
Mex $ 159 .00 Mex $159.00
Mex $54.00
Mex $ 27 .00 Mex $27.00