Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

FEIFANKE 135A Flux Core MIG Soldador, 110V 3-IN-1 MIG/ARC/Lift TIG máquina de soldadura con alambre de 0.5 kg .030 pulgadas, antorcha MIG y 5 varillas de soldadura, soldador sin gas con IGBT, inversor

Envío gratis en pedidos superiores a Mex $600.00

Mex $3,471.66

Mex $ 1,458 .00 Mex $1,458.00

En stock

1.Tamaño:Total Length: Approx. 14.5cm


2.Nombredelpatrón:110 V


  • Soldador MIG sinérgico: el soldador MIG FEIFANKE 135A 110V coincidirá con el voltaje de forma inteligente. Después de seleccionar el diámetro del cable, puedes controlar la velocidad de alimentación del cable ajustando la corriente (30-135A), y el soldador de núcleo de flujo recomendará el grosor de la placa adecuado. El panel digital grande es transparente y fácil de operar tanto para principiantes como para soldadores profesionales.
  • Fácil de trabajar con kit de soldadura completo: el soldador portátil de núcleo de flujo pesa solo 15 libras. El paquete incluye: 1 máquina de soldadura MIG 135, 1 linterna MIG, 1 abrazadera de tierra, 1 soporte para electrodos, 5 varillas de soldadura de 3/32 pulgadas, 1 cable delantero de flujo de 0,8 mm, 3 boquillas de conductividad de 0,8 mm, 3 boquillas de conductividad de 1,0 mm, 1 cepillo para polvo, 1 manual de usuario.
  • Soldador de núcleo de flujo 3 en 1: el FEIFANKE MIG135 se puede utilizar como máquina de soldadura ARC, máquina de soldadura de alimentación de alambre y soldador TIG de elevación (antorcha TIG no incluida). La corriente de salida 30-135A es adecuada para soldar carbono y acero inoxidable (de 1 mm a 5 mm). Ideal para bricolaje en casa, reparación en interiores y exteriores, metal oxidado, granja, valla, puerta, mantenimiento y reparación de carreteras.
  • Soldador MIG sin gas seguro y potente: la soldadora FEIFANKE MIG de 110 V está certificada con CE, UKCA, FCC y UL. La máquina de soldadura de metal FEIFANKE utiliza tecnología de inversor MCU e IGBT, y los potentes arcos proporcionan una soldadura más suave y una penetración profunda. El soldador Flux Core viene con compensación de variación de voltaje, protección contra sobrecorriente, protección contra sobrecalentamiento, protección contra sobrevoltaje y subvoltaje para garantizar un funcionamiento seguro y una larga vida útil de soldadura.
  • Servicio cálido FEIFANKE 24/7: FEIFANKE te proporciona una garantía de devolución de dinero de 30 días y una garantía de 2 años. Las máquinas de soldadura defectuosas también se pueden reemplazar en 60 días. Si no estás satisfecho con tus máquinas soldadoras, lo reemplazaremos por ti.


La máquina de soldadura FEIFANKE Flux Core MIG/ARC/Lift TIG adopta tecnología avanzada de inversor IGBT y proporciona un ahorro de energía 30-135A 110V eficiente para satisfacer tus necesidades de soldadura.

La máquina de soldadura con fuerza de arco integrada y arranque en caliente es muy fácil de operar. La máquina soldadora puede ser utilizada por principiantes, entusiastas de la soldadura y soldadores profesionales. Es adecuado para proyectos de mantenimiento, reparación y bricolaje en el hogar, cochera, patio o granja.

Contenido del paquete:

1 soldador MIG de 135 A.

1 linterna MIG de 2 m.

1 soporte para electrodos de 1,8 m.

1 abrazadera de tierra de 1,2 m.

1 cepillo para polvo y martillo de 18 cm.

1 alambre de núcleo de flujo de 0,8 mm y 0,5 kg.

3 boquillas conductoras de 0,8 mm.

3 boquillas conductoras de 1,0 mm.

5 varillas de soldadura de 3/32 pulgadas.

1 manual de usuario (idioma español no garantizado)


John
Comentado en los Estados Unidos el 11 de marzo de 2025
This has been a fantastic little welder and has already paid for itself. I just needed something for projects at home, not planning to do any real fabrication, just do basic repairs. I was able to patch up the axle on my garden cart, fix up my tomato cages, and patch a hole in a motorcycle gas tank so it has already paid for itself and then some. Good for beginners and fixing things around the house! Am I good at welding? No, but that's what the angle grinder is for!! Lol.
Mr Optimism
Comentado en el Reino Unido el 2 de febrero de 2025
I bought this to repair our kitchen stooI the base had come loose, this welder was cheaper than a new stool. I was a bit wary about gasless mig especially a very very cheap gasless mig. I was amazed it works so well. Consistent wire speed, which is automatic weld seems stable and it feels good in your hand. Everything apart from the wire brush says quality, but it's a wire brush so it doesn't matter.Easy to setup with wire feed, put the right size drive roller in and it just works. The display is a nice matt white colour, clear and easy to read. I cant think of a single bad point to say about it that is within its design spec. It's worth every penny.
denis gauthier
Comentado en Canadá el 21 de enero de 2025
This is a great welder for beginners and works very well
Eric
Comentado en los Estados Unidos el 12 de enero de 2025
I’m a master carpenter and a decent sheet metal fabricator, but I’m a complete novice at welding and it’s way past time for me to learn and get good. I purchased this welder after reading tons of stellar reviews and seeing what all was included for this unbelievable price. In fact reading the reviews and seeing the price had me wondering if there was a mix up in the listings. However this little welder is absolutely legit. It comes with a mig torch, wire, a stick holder, and rods. And they all worked great. Just playing around on random pieces of metal lying around the house, I was able to lay down nice beads with the wire and start and maintain arcs and create functional welds with the rods. The stick welds had nice even layers of slag over them that chipped off clean and the mig welds came out like those “stacked dimes” you want. I’m working on getting the required accessories to use this with tungsten as well, as tig welding stainless steel and aluminum is my main objective. Given the versatility, usability, and quality, this thing is just an exceptional value.It’s lightweight and super portable. While it ran off a standard 15 amp 110v circuit just fine, the manual states that it is dual voltage and can run off 240 with an adapter. I plan to install a dedicated 30 amp 110v circuit at my house to run this, and that will more than suit my needs. It looks well built and should be plenty durable if I take good care of it, and I like the orange color.All I can say is that this is an incredible tool for the price, and I couldn’t imagine a better entry level welder. Honestly before this came in my only experience was with a harbor freight wire feed, and it was completely useless. This one costs less and actually works. I’m simply amazed. This is an excellent first welder for me and for anyone else, and anyone looking to learn an extremely valuable new skill on the cheap shouldn’t hesitate to buy this.
Wallace
Comentado en Canadá el 27 de octubre de 2024
I am new to use this kind of welding machine. This is a very handy machine and very easy to learn and to use. I need to weld two reinforce bars on my hitch mounted cargo carrier. It took me a few minutes to assemble it. Then I just follow some videos for beginner on YouTube and tried on a piece of metal a few times. Once I felt good, I started welding on the cargo carrier. It was easy to adjust wire tension and power following the videos. Finally I was able to weld the reinforce bars on my cargo carries successfully, as well as welding a few other places in my yard.The mig torch and feed are smooth and easy for a beginner to start to learn and to use.Super worth of buying it!
Productos recomendados

Mex $1,299.00

Mex $ 610 .00 Mex $610.00

4.9
Elegir

Mex $2,299.00

Mex $ 965 .00 Mex $965.00

4.5
Elegir

Mex $565.00

Mex $ 259 .00 Mex $259.00

4.8
Elegir

Mex $5,999.00

Mex $ 1,881 .00 Mex $1,881.00

4.5
Elegir

Mex $5,081.92

Mex $ 1,881 .00 Mex $1,881.00

4.4
Elegir