No hay artículos en el carro
No hay artículos en el carroLa tabla de tallas se adjunta con fotos. Consulta la tabla de tallas antes de realizar tu pedido para la chamarra universitaria de Chicago, es muy recomendable.
Thomas M Miller
Comentado en los Estados Unidos el 16 de febrero de 2025
A fine handle, but the opening size is 1/4"x3/8" not 3/8"x1/2" as stated.
MC84
Comentado en los Estados Unidos el 20 de octubre de 2024
I had a rusted handle for a Nibco S-FP-600A-LF Ball Valve. The stem on the valve and the stops on the valve are not that common. This handle works. There is a little play in that the slot that the stem goes through is slightly too large. Also this valve is outdoors and should resist corrosion.
Zach
Comentado en los Estados Unidos el 17 de agosto de 2023
I bought this as a replacement for a handle that had rusted off due to being on a water line valve that was underground for my irrigation system. The stainless should hold up better given that this is often a wet environment. Easy to install, just make sure you have the right size measurements of what you're replacing
M
Comentado en los Estados Unidos el 5 de mayo de 2023
Fits 3/4” valve Replacement lever. No modification needed as other mentioned. Time will tell if this is really stainless steel or if it will rust like my old lever of a different brand.
William D. Boehmer
Comentado en los Estados Unidos el 25 de marzo de 2023
This handle fits my valve and I'm confident that the stainless steel will last, but the stop tangs are mirror image vs. my original handle. This means that the tangs do not stop the handle correctly in either the open or closed valve position. Instead, I have to eyeball: OPEN is aligned with the pipe, CLOSED is crossways to the pipe. I'll have to live with it.
Productos recomendados