No hay artículos en el carro
No hay artículos en el carroReady2Move
Comentado en los Estados Unidos el 26 de marzo de 2025
Top quality pipettes. I purchase these for my home and bath business. Mine haven't leaked or popped at the seam like other brands I have tried. Really good quality and great price point. They package the pipettes in resealable zip top bags.
PoisonBb
Comentado en Canadá el 27 de agosto de 2024
I’d give this six stars if I could. Very strong and holds motor well. Replaced cheap aluminum and the rubber is thicker. Don’t trim all the way down. Just enough to apply small amount of pressure.
Debra Carey
Comentado en Canadá el 29 de junio de 2024
Works on our 90 hp merc. Well built
Brian Sutton
Comentado en los Estados Unidos el 30 de octubre de 2024
Great deal on these pipettes. Came in exactly as described. Should last me a very long time but would definitely re-order.
Will Plan
Comentado en los Estados Unidos el 28 de octubre de 2024
Will be using these to assist removing that last little bit of fuel in a gas tank when getting ready to store equipment for a while.
michael loes
Comentado en los Estados Unidos el 11 de octubre de 2023
I purchased marine tech transom saver, with probably the weakest, cheapest piece of rubber I have seen on a transom saver. I replaced it with the extreme max and it is far, far, tougher and more durable. I never plan on replacing this one. The marine tech barely made it one year.
Scott Bogue
Comentado en los Estados Unidos el 3 de septiembre de 2022
I needed a small, compact transom saver for a square stern canoe with a 5 hp. Most transom savers are designed for bigger boats and motors. With the addition of a 24" piece of steel tubing, it's Just Right. The rubber block is relatively soft (easy on the motor) and the Y frame metal is 1/4" thick.
Berri
Comentado en los Estados Unidos el 21 de octubre de 2019
These are so useful for when I'm baking because when I would use vanilla extract or food coloring, I would accidentally pour in too much and it'd be way too strong. But these are very precise with the drops. I also use these for testing my fish's water and using the liquid test kits. Those are the only two uses I've found so far but they're still very useful to me.
A.C.
Comentado en los Estados Unidos el 3 de enero de 2019
My boat came with the transom saver that has the two swivel jaws with two rubber pads each on them. This worked fine for about a year, but the rubber pads fell completely apart. I ordered this as a replacement, as I figured the big rubber chunk would hold up much better than the four pads. So far it has.I’m not sure who made my transom saver, but I’m almost certain it wasn’t the same company as who makes this - I knew this before purchasing. I bought it hoping it would slip inside my old one once I removed the old jaws and it did. After adjusting, my motor sat exactly the way I wanted.The only problem I have found, is that this appears to be made for an outboard with a much broader lower unit, as the V in the rubber block is quite wide. For reference, I have a Yamaha 115 SHO, and this block allows the motor to roll all the way over to one side while driving down the road, because my lower unit is so much more narrow than the V. I don’t THINK this will be a huge problem, as it is still transferring the shock of bumps in the road directly to the trailer instead of the transom, it would just make me feel marginally better if it held the motor straight. I tried squeezing the metal jaws in with a large vise, but to no avail; they sprung right back to basically the same position.Overall, I think this will far outlast my old style transom saver head, just a minor complaint about the width of the V.
Customer
Comentado en Canadá el 25 de octubre de 2018
Well packed....useful for what I need them for.
Productos recomendados