No hay artículos en el carro
No hay artículos en el carroIdeal para soldadura, arcilla de metal precioso, escultura de metal, trabajo de cera, artesanía y reparación de joyas. La función de ajuste fácil asegura la llama adecuada para cualquier trabajo con precisión de precisión. Hebras de antorcha verticales en base metálica segura. Sistema de bloqueo de seguridad integrado a prueba de niños. El interruptor de seguridad debe presionarse hacia abajo cada vez antes de poder presionar el interruptor de encendido. Fácil de usar y de rellenar con un diseño ergonómico de recarga rápida. Cuenta con un encendido electrónico (no es necesario encendedor). Tiene una temperatura máxima de 45°F y 90 minutos de combustión. Para uso con triple refinado butano, disponible en cualquier lugar. Medidas: 19 cm de alto en soporte. Butano no incluido. Instrucciones y advertencias de seguridad incluidas en el paquete. Siempre almacene vertical. Una vez llenado de butano, contiene gas inflamable bajo presión. No utilizar cerca de chispas o llamas abiertas. No perforar ni incinerar el recipiente ni almacenar a una temperatura superior a 120°. Asegúrate de que el fuego esté apagado antes de rellenarlo. Deja de rellenar una vez que el gas comience a desbordarse y espera 3 minutos antes de su uso. No abra, rompa ni suelte la antorcha. Mantener fuera del alcance de los niños.
Paige Forland
Comentado en los Estados Unidos el 22 de febrero de 2021
I loved this torch while it lasted. It is really great for dainty jewelry metalsmithing. It worked well for daily use for about 4 months until it stopped being able to ignite even after being entirely refilled. I am hoping that it was just a fluke with this one torch because it really was great while it lasted.
Julie Chutes - Kentucky
Comentado en los Estados Unidos el 22 de julio de 2020
The torch came as promised. Average mailing time. Not fast. I filled it with butane and it lit right up. This is a replacement torch of the same exact model and size I have been using for about 5 year's. I love that it holds more gas than my small portables and it gets very hot for melting silver not enough on it's own for pouring but it can do the job with a secondary torch for good flow. Better on dry hot days. Not a good torch for very fine and petite pieces unless you are practiced. I find it a tried and true torch and recommend for jewelry making and repair.
Lydia the slightly tattooed lady
Comentado en el Reino Unido el 1 de agosto de 2017
Great torch (I've used them before), more welly than a standard butane jeweller's torch, with enough heat power to solder larger pieces. Nice adjustable flame, and switch so you can leave it on until you are done. Easy to operate with one hand.Took aaaaaaages to arrive though.
Jennifer S.
Comentado en Canadá el 27 de octubre de 2016
Handy torch...use a lot
BC
Comentado en los Estados Unidos el 15 de agosto de 2015
I read the reviews and saw that some buyers rated this torch as poor, but I bought it anyway because there were also many positive reviews -- and also because the jewelry book I'm reading recommended this torch. I'm sorry to say, this torch never worked properly at all. It was extremely difficult to get it to light the first time (took 12 to 15 "strikes" with the ignition buttons to light it), and then it stayed lit only a minute or two before the flame petered out. After that, I could not get it to light at all -- and I must have hit the ignition buttons 40 times! (And I did fuel it with triple refined butane.) I am familiar with torches and have used my little mini torch for 3 years with no problem (except that it doesn't have enough flame/heat for the bigger projects I'd wanted to use this torch for). Whoever makes this torch has serious quality control problems.Save your time and money and don't buy this torch.
Productos recomendados
Mex $278.00
Mex $ 158 .00 Mex $158.00
Mex $416.09
Mex $ 191 .00 Mex $191.00