No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Cinturón de pesca de cintura Cinturón de lucha ajustable Cardán de aleación de aluminio Soporte acolchado para caña de pescar (dorado)
Características:
1. ESPONJA DE 9 MM DE GRUESO: El cinturón de soporte de la caña de pescar ligeramente curvado hacia atrás con una esponja de 9 mm de espesor. Distribuya la presión uniformemente y garantice una pesca larga y cómoda. La almohadilla de espuma gruesa es cómoda y puede proteger su abdomen
2. ALTA RESISTENCIA Y: Este cinturón de pesca adopta un material de aleación de aluminio de calidad, de alta resistencia, resistente y. Revestimiento de EVA, buena sensación en la mano. Resistencia al agua de mar para uso a largo plazo
3. AJUSTABLE CON SUJETADOR: Parte del soporte de la varilla de extracción, el cinturón es una cuerda tejida con un sujetador de seguridad fijo, se puede ajustar según las necesidades de las diferentes personas.
4. CUBO DE ESTILO PROFESIONAL: Este cinturón de soporte para caña de pescar es un cubo para caña de estilo profesional de alta calidad que se usa con caña de pescar y aumenta la capacidad de capturar peces grandes. Ayuda a dispersar la tensión del tambaleo en los peces que luchan.
5. MEJOR RESISTENCIA A LA ABRASIÓN: El cinturón de lucha de pesca con apariencia de cinturón de proceso de glaseado, mejor resistencia a la abrasión. Perfecto para regalos del Día de la Madre o del Padre.
Especificación:
Tipo de artículo: soporte de varilla acolchado para cardán
Material: aleación de aluminio + EVA
Color opcional: dorado, azul
Tamaño: Aprox. 30x14x12cm/11,8x5,5x4,7in
Circunferencia de cintura adecuada: aprox. 100 140 cm/39,4 55,1 pulgadas
Lista de paquetes:1 x cinturón de pesca
Jeremiah Karrasch
Comentado en los Estados Unidos el 24 de marzo de 2025
This is a great product when you think of cost versus functionality. It is a good solution for a device that is usually pretty expensive. I use it at a gimbal holder that I can take the gimbal off and strap right in to a catch. Highly functional but a little cumbersome on my waist. It is a little awkward to put on and is a little noisy when it moves. But again, great product versus price.
chris
Comentado en los Estados Unidos el 26 de febrero de 2025
Im a big and tall guy I only bought this because it not going to be used much and it said belt size adjustable to 55in Belt size definitely not 55in more like 46 max very disappointed. but other than that you get what you pay for an anodized aluminum plate with a piece of foam glued to the back as a pad.
Customer
Comentado en los Estados Unidos el 24 de febrero de 2025
Good image quality and has held up well. Installed for about 3 months and have not noticed any water intrusion. Decent at night. The wire length was plenty long enough to install. Functions well and is fully adjustable. Great value for the money.
Gary B.
Comentado en los Estados Unidos el 27 de agosto de 2024
I connected the camera wires to the tail ight wires using a "Tap Splice", but the splice didn't cut all the way thru the insulation to the wires. Therefore, no power connection. . . . :-(This took quite a while to figure out, so be careful.After we got power, things starting working right. Camera works. Yaay!My radio is set up for default 1080P25fps, so no signal to the head unit. Go thru the options and select CVBS N, and you get the video, because the camera is transmitting CVBS N as the default. It is the low def video. Then I cut the orange wire on the camera lead, and Bingo it's transmitting Hi Def video. Go back to the head unit and change options to 720P 25fps which the camera is now transmitting. Now I have Hi Def video on my head unit screen. Beautiful Hi Def video! Better than my wife's screen on her 2020 Nissan Murano!Bottom line, the camera is great value for the price. Be careful with the mechanics of installation.
Michael
Comentado en los Estados Unidos el 26 de marzo de 2024
I bought this as I liked the idea of being able to adjust the camera angle. The picture is great if you can get the camera to stay positioned properly. However if you get it positioned where you want it and tighten set screw just enough to keep it there it will move as you drive. Which makes you have to reposition it. If you try to tighten it more the set screw moves the camera position. The more you tighten it the more it moves. If you leave it loose it shifts during driving or opening and closing the trunk. Essentially making this design worthless. I will be returning this and buying a fixed position camera. Good concept poor execution.
Josh Young
Comentado en los Estados Unidos el 19 de septiembre de 2024
I compared this to 4 other backup cameras (my first purchases as an attempt to replace my old stereo were cheap external tablet style radios that came with cameras). I also compared this to the eRapta 720 and 1080 cameras.Despite claiming the same camera angle, this camera had a wider angle. Some might like this (I do) as it displays much more of your surroundings. But it also distorts the view a little bit more.The other eRapta cameras had backup lights, but I found this camera did better in the dark.Oddly the picture was clearer and more responsive for me when I had the orange wire connected (CVBS) instead of AHD (I ended up soldering them back together).NOTE!!! One very noteworthy item that I discovered is that the white wire needs to be cut in order to install this as a reverse camera. The image is NOT mirrored until the wire is cut. Comparing this with my wife's stock Toyota backup camera on our highlander and some googling confirmed that things should appear on the monitor on the side that they exist (mirrored view). And with the white wire connected the image is reversed from that. This is opposite of what the instructions say. I thought that the white wire was damaged on my unit and ended up getting a replacement only to find that it was the same.
Todd S
Comentado en los Estados Unidos el 12 de abril de 2024
I did entirely to much research on back-up cameras. I ordered four cameras, sent three back.This was the winner for these reasons:1) comes with extra screws. They are tiny, and you could lose them easily. It's nice that they include extra screws in case one is lost, or stripped, etc. Most other companies don't include any extra.2) Install flexibility. Included a bracket/plate that you can screw onto the car; also includes a threaded stud to insert and secure nut from the rear. I'm using the bracket with double stick tape for now to ensure I am happy with location. After location is finalized, I'll switch to the stud connection.3) The wiring harness is very well thought out. The camera has a tiny four pin connector that plugs into the harness. There is no large RCA plug on the camera end in addition to power connections.. This makes it MUCH easier to run wiring and to hide the wiring. It's also a very secure connection. I don't want multiple connections that could wiggle loose, especially when they are behind body panels. The power leads on this are long. I could run the power lead from the camera down the side panel and into the reverse light on my van. No need to splice in an extension wire. Fewer connections, fewer points to fail.4) Picture quality, and night vision, are superb. I have this running to a Pioneer headunit with a 9" screen, so the image is fairly large. No issues with quality. The night vision is much better than expected. The wide field of view is nice; I'm more concerned with seeing cars or pedestrians coming from the side than what is directly behind me and this thing delivers.5) You can adjust the lens direction and secure it with a set-screw. I was concerned the tiny set screw would loosen after a while. We did a 2400 mile road trip with plenty of bouncy roads (including dirt roads) and it did not budge.All in all, super happy with this camera.
Productos recomendados
Mex $318.00
Mex $ 171 .00 Mex $171.00
Mex $321.00
Mex $ 160 .00 Mex $160.00
Mex $337.00
Mex $ 165 .00 Mex $165.00
Mex $1,342.99
Mex $ 590 .00 Mex $590.00