Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

EOS RP - Protector de visualización de vidrio para cámara digital Canon EOS RP sin espejo, ULBTER 9H Protector de visualización de vidrio templado de borde a borde, antiarañazos, antihuellas,

Envío gratis en pedidos superiores a Mex $600.00

Mex $227.91

Mex $ 129 .00 Mex $129.00

En stock

Acerca de este artículo

  • ✪ Protector de visualización LCD que se adapta perfectamente a la cámara Canon EOSRP DSLR. No apto para EOS R y otros modelos. Fácil de instalar con adhesivos 100% sin burbujas, instalación sin burbujas.
  • Dureza 9H: un tiempo de templado más largo, lo que hace que el protector de visualización tenga una mayor dureza. Evita que la visualización de la cámara caiga de alto impacto, arañazos como llaves y cuchillos, rasguños y golpes.
  • ✪99.99% de claridad HD: alta transparencia proporciona una visualización clara de alta definición. El revestimiento hidrofóbico protege la visualización de la cámara de las huellas dactilares de forma eficaz y mantiene la respuesta táctil de alta sensibilidad.
  • ✪Máxima definición y sensibilidad: material de alta calidad y solo 0,3 mm de grosor, extremadamente delgado para ofrecerte una experiencia de visualización de alta permeabilidad y vidrio con un reflejo ultra bajo y no reduce la sensibilidad.
  • ✪Fácil de quitar sin residuos, quedando tu cámara nueva. Cuando se fija en la visualización, es casi automático.


vidrio templado ULBTER antiburbujas, antiarañazos, antihuellas, ultra transparente 9H
Antiarañazos y dureza 9H
Adopta material de alta calidad y un tiempo de templado más largo que dará una protección completa para la visualización LCD de tu cámara.
Después de usar este protector de visualización, no tienes que preocuparte por que la visualización de tu cámara se rompa y dañe.
99.99% de claridad HD
Transmisión de luz transparente e incomparable hasta el 99,99%. Todo el color de la visualización se muestra incisiva y vívida sin distorsión.
Sin burbujas y agradable al tacto
El calcomanía sin burbujas hace que sea fácil de instalar este protector de visualización de vidrio templado. Cuenta con bordes redondeados 2.1DX y toca suavemente en todos los bordes.
Muy resistente a los arañazos
Este vidrio templado de alta calidad evita que el vidrio se rompa y arañazos resistentes para proteger tu cámara de objetos afilados también como llaves, cuchillo, etc.
Material:
Vidrio de alta calidad
Paquete:
3X Flim de vidrio templado aplicable para visualización LCD Canon EOS RP.
3 papeles de limpieza húmeda.
3 papeles de limpieza en seco.
3 absorbentes de polvo.
1 caja de embalaje.
Nota: solo accesorios, cámara no incluida.
Si no estás 100% satisfecho con nuestro producto, por favor envíanos un mensaje, resolveremos el problema por ti


Verónica Saavedra Salas
Comentado en México el 29 de enero de 2025
Esta fantástico, calza perfecto en la pantalla y lee muy bien el touch con el protector, una maravilla
Customer
Comentado en los Estados Unidos el 8 de octubre de 2024
Works great, seems very clear, came with multiple screen protectors. Nice.
Kevin R Fomiatti
Comentado en Australia el 27 de abril de 2024
Easy to apply and a perfect fit. Thanks
J
Comentado en los Estados Unidos el 20 de junio de 2023
Fantastic product and les than 1/3 the price my local camera shop was trying to charge for similar product. This is a hard glass screen, was in perfect condition, very clear, installs without any bubbles, very responsive to touch. Essentially, it's perfect and for an amazing price.Installation wasn't so bad. It actually took me 3 attempts to lay the same glass piece but the final result had no bubbles, dust, or anything and you can barely tell it's even there. The screen still flips and folds back into the back of the camera with no issue. (I thought the extra thickness would be an issue, it's not at all).So, I first cleaned the screen with the lens cloth, I then used wet wipe 1 (it was not dry, like another user reported), then used dry wipe 2 to dry it off....I also gave it some time to air dry, then wiped it more. Once it was completely dry I used the dust stickers (included) to clear any small particles that got attracted to the screen from static charge. Peeled back the protective layer from the glass, lined it up the best I could and applied it.Attempt #1 was really bad so I very carefully lifted the glass back up. Go very slow to not flex then break the glass. I then pressed the glass against the right edge of the screen (there is a small lip you can use to help align the glass). I let it slowly lay down as it self-removed bubbles.Attempt #2 was slightly off on the bottom left where I went over the glass and onto the plastic frame....again I very slowly lifted the glass (very slowly) but this time I lined it up on the right ridge (mentioned above) then tilted it the slightest bit more so that the bottom left corner would sit properly once done. I let the glass go down very slowly and it all lined up.Attempt #3 because I let the glass down a bit too quick and there was a bubble. I tried to push it out but no luck so I put my fingernail under the bottom left corner and SUPER SLOWLY lifted the glass again. Once I got past the bubble I let the glass fall back down on its own.It worked perfect. (even after 3 attempts with the same piece). I can barely tell that it's even on. So, worth the money and now I have 2 more in a nice small case ready to go if I need them in the future.P.S. Normally when installing screen protectors on cell phones I spray the screen then install the protector, this lets me adjust the glass and work out any bubbles.....DO NOT use this method for this product. It goes on very smoothly and with no imperfections without the extra moisture. Just make sure you pull off that clear plastic film moments before you plan to install it (after cleaning the screen).
Sergio
Comentado en México el 18 de junio de 2023
El paquete trae tres micas para la cámara Canon RP, no tuve ningún problema al ponerla en la cámara, la verdad no luce nada especial ni diferente de cualquier mica para celular, por lo que espero que dure por mucho tiempo, en cuanto al tamaño queda bien a secas, ya que al intentar poner la pantalla en su lugar no queda igual por el tamaño de la mica
Tobin Shipp
Comentado en Francia el 25 de marzo de 2023
Pas trop épais. fonctionne avec l'écran fermé et ne laisse pas beaucoup d'empreintes digitales. est livré avec plusieurs et ne se casse pas facilement. super achat!
Omar
Comentado en México el 30 de noviembre de 2023
El producto muy bien , fácil de colocar, llego mucho antes de lo esperado.
ether2802
Comentado en México el 6 de mayo de 2022
Que chido que proteja la pantalla, aunque siento que no me deja ver en los mismos ángulos que sin esta protección
Liz M
Comentado en Australia el 6 de diciembre de 2022
Product exactly as described and extremely quick delivery with 48hrs of placing order
RAFAEL G.
Comentado en México el 22 de julio de 2021
Muy contento con la descripción del producto, muy rápido para la entrega y quedo super bien en mi pantalla de mi cámara Gracias.
Productos recomendados

Mex $329.98

Mex $ 171 .00 Mex $171.00

4.5
Elegir