No hay artículos en el carro
No hay artículos en el carro Marca: ElectroCookie.
Tipo de PCB: doble cara.
Acabado de la superficie: chapado en oro para evitar la oxidación.
Color: azul.
Dimensiones: 172,7 x 52,1 mm.
Diámetro del orificio pasante: 1,2 mm.
Orificios de montaje: M3 (Ø3,2 mm) y M2 (Ø2,2 mm).
Ancho del trazo: 1 mm.
Trevor W
Comentado en los Estados Unidos el 13 de marzo de 2025
Will look good in the end, but the product is extremely challenging for a glue up application. I purchased high end construction adhesive that works on pvc and is fast acting, which works great. The panels have a lot of flex, especially along the thin perimeter and corners. I have figured out that for best results I need to work in small sections and use lots of tape to secure the tile while the glue sets, to prevent droop on the edges. I’ve also figured out the panels from box to box are not precisely the same size, so there are inherent gaps that we will need to use paint to hide. I’ve also experienced several boxes of tiles that have damaged corners because Amazon ships them to your door with zero additional packaging beyond the vendor box - very little protection. Yes, Amazon makes it easy to return items but it’s still a hassle. The time to do the project is much longer because of all factors above.
むくち
Comentado en Japón el 26 de febrero de 2025
基板の反りやバリはなく、作業しやすい。細長いユニバーサル基板が必要で購入したが、この商品はあくまでブレッドボードの回路を移植するための基板なので、裏面でランドが繋がっているのが残念。もちろん確認せずに購入した自分が悪いのだが、ランドが繋がってないタイプがあると良いと思った。
GertheissPrime
Comentado en Alemania el 24 de enero de 2025
Das macht es wirklich einfach einen (guten) Schaltungs-Entwurf vom Breadboard 1:1 auf eine Platine zu übertragen. Die (ich vermute) vergoldeten Kotakte gehen durch jede Bohrung durch, sodass auch SMD Bauteile oben aufgelötet werden könnten. Die Dinger sind echt durchdacht. Ich bin begeistert.
a teacher
Comentado en los Estados Unidos el 6 de noviembre de 2023
I just received these well-made Electrocookie breadboards for building permanent circuits. The layout and workmanship are great and they match my solderless breadboards. I just received them in less than two days from ordering them. I will try them out on my prototypes in a week and probably will buy more of these soon. These economical breadboards look good. When I purchase some more, I will write a second review letting you know how they hold up from soldering my through the hole circuit prototypes. Dear Electrocookie, could you offer these boards in a white background? I purchased the blue background boards, but I could use some white ones too - if available.
Valérie
Comentado en Canadá el 26 de agosto de 2022
Si acheter pour mettre au plafond sans plafond suspendu … compliquer et fragile à couperManque de finition …On a dû mettre des moulures autour pour les tenir et et cacher les joints
Rui
Comentado en el Reino Unido el 6 de julio de 2022
I was actually undecided between 4 or 5 stars for this one.Build quality is really good, and they can take the heat well when soldering.But for me, I find the terminal strips a bit too wide for my taste.If you look at the product pictures, you'll see the terminal strips are as wide as the power rails. This makes it easy to accidentally cover with solder adjacent holes on the same strip (see my picture).The previous solderable breadboards I used were Adafruit's Perma-Proto, where the strips are way narrower (maybe too much actually).Depending on your assembling method, it might not make any difference, but personally I tend to solder some things such as connectors, sockets, etc to set the desired layout then go ahead and do the actual wiring, which means once I go for the wiring step, I might need to use some wick to clear up any holes I accidently covered.If it's a small enough project, you'll probably put put everything on the board and solder all at once, so that won't make any difference, and the spilling the solder to the next hold in the strip might even make it easier.Still, from slightly more than 100 connections I soldered yesterday on my first step of new board, I had only 1 of those accidents, but a lot of close calls. :DThe upside is that I found that wider strips make it easier to get that satisfying pyramid shape when soldering (makes for a better connection).So far, that seems like the only niggle I have, and something to keep in mind.I'll probably keep buying them, since they are good value for the quality you get.
sue davies
Comentado en el Reino Unido el 28 de julio de 2022
Over priced for what they are. They are very flimsy and would probably break very easily.
JohnM
Comentado en el Reino Unido el 29 de noviembre de 2022
These are excellent quality and replicate standard full-size breadboards almost exactly. Where they differ, they are actually an improvement, with the power rails being available at all 63 positions. I built Ben Eater's 6502 breadboard computer and then transferred it to these boards. I highly recommend them. A tip for the person who finds adjacent holes filling up with solder - use finer solder. That will allow you to control more easily how much you apply. Also, if you are using additional flux - don't. There's enough flux included in the solder for this particular through-hole purpose. Surface mount components are a different case but you won't be using them with these boards.
michel st-denis
Comentado en Canadá el 30 de enero de 2022
Nice and easy
Fahad Mubarak
Amaaazing highly recommended
Productos recomendados
Mex $311.54
Mex $ 140 .00 Mex $140.00
Mex $246.82
Mex $ 123 .00 Mex $123.00
Mex $456.57
Mex $ 205 .00 Mex $205.00
Mex $350.00
Mex $ 171 .00 Mex $171.00
Mex $475.13
Mex $ 251 .00 Mex $251.00