No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Especificaciones del producto:
Material: Latón
Sistema métrico: M2 M2.5 M3 M4 M5 M6
Cantidad: 314PCS
● M2 x 2 x 3.2 ------------ 25 piezas ● M2 x 4 x 3.2 ------------ 25 piezas ● M2 x 6 x 3.2 ------------ 25 piezas
● M2.5 x 2.5 x 3.5 ------------ 25 piezas ● M2.5 x 4 x 3.5 ------------ 25 piezas ● M2.5 x 6 x 3.5 ------------ 25 piezas
● M3 x 4 x 4.2 ------------ 16 piezas ● M3 x 6 x 4.2 ------------ 16 piezas ● M3 x 8 x 4.2 ------------ 16 piezas ● M3 x 10 x 4.2 ------------ 16 piezas
● M4 x 4 x 6 ------------ 16 piezas ● M4 x 6 ------------ 16 piezas ● M4 x 8 x 6 ------------ 16 piezas ● M4 x 10 x 6 ------------ 16 piezas
● M5 x 6 x 7 ------------ 7 piezas ● M5 x 8 x 7 ------------ 7 piezas ● M5 x 10 x 7 ------------ 7 piezas
● M6 x 6 x 8 ------------ 5 piezas ● M6 x 8 ------------ 5 piezas ● M6 x 10 x 8 ------------ 5 piezas
Ken Y
Comentado en los Estados Unidos el 11 de marzo de 2025
A rare but pleasant surprise: the set now seems to contain more inserts than stated in the description. The box I received had 6 each of the M6 inserts, 8 each of the M5 inserts, and 20 each of the M4 inserts, for a total of 122 instead of the stated 100 in the description. Quality seems decent, and the case is better than others because of how compact it is for the number of different sizes.
Marc F
Comentado en Canadá el 24 de febrero de 2024
J'en au utilisé quelqu'un pour des impressions 3D et ils conviennent parfaitement
Fernando Taddei
Comentado en México el 1 de diciembre de 2024
El estuche es una excelente idea para la separación de las tuercas. Uno puede ver claramente cuando algún tamaño está por acabarse. Tratándolo con cuidado puede durar varias recargas.
JSB
Comentado en los Estados Unidos el 25 de noviembre de 2024
Will be buying more of these. Not much to say but they are threaded well and are great for 3D printed Items that need a thermal insert.I dont have the fancy soldering iron tool but you can use a regular iron, just clean the tip and Pre-set the nut in the back side of the hole, Place the soldering iron tip in the nut and gently press it into position and let it cool. Just make sure you don't have solder on your iron tip that could clog the threads. Also always make sure you insert the but in the opposite side on where your going to pull from for better strength.
Alex Gunn
Comentado en los Estados Unidos el 4 de enero de 2024
Nice set, with a good range of sizes. If you use it for 3D printed parts don't forget to increase your infill or you might not get a strong grip. Used on a few projects so far and really happy with the results.
Christopher Lefont
Comentado en los Estados Unidos el 12 de noviembre de 2023
I really love how much variety this kit has and I love how everything is labeled and organized. The threads stay in place with no issue after letting the PETG cool down and the quality doesn't seem bad. Now My big issue is how inaccurate the 7.09 is across the different M6s, I've included pictures of my caliper. The only one that was decently accurate were the M6 H6 & H8 which meant they work in my 3D prints, until I used an H10 which didn't melt through properly and found out that it was just very inaccurate in size as it's 7.42mm for the guide ring. The other problem I have is that there's very few inserts for M6s, so this kit is mostly meant for tinkering and testing. I wish they sold extras for each of the sizes since since it's impossible to find some of them. Most of the ones I found are 12.7mm in length and only a place or two has 10mm ones. I've been unable to find any of the other M6 sizes anywhere.
Productos recomendados
Mex $337.00
Mex $ 185 .00 Mex $185.00
Mex $739.00
Mex $ 391 .00 Mex $391.00