Justin
Comentado en los Estados Unidos el 29 de marzo de 2025
Looks very good, and it’s very sturdy.
Justin
Comentado en los Estados Unidos el 29 de marzo de 2025
Looks very good, and it’s very sturdy.
Justin
Comentado en los Estados Unidos el 29 de marzo de 2025
Looks very good, and it’s very sturdy.
Justin
Comentado en los Estados Unidos el 29 de marzo de 2025
Looks very good, and it’s very sturdy.
Justin
Comentado en los Estados Unidos el 29 de marzo de 2025
Looks very good, and it’s very sturdy.
Justin
Comentado en los Estados Unidos el 29 de marzo de 2025
Looks very good, and it’s very sturdy.
Justin
Comentado en los Estados Unidos el 29 de marzo de 2025
Looks very good, and it’s very sturdy.
Justin
Comentado en los Estados Unidos el 29 de marzo de 2025
Looks very good, and it’s very sturdy.
Carlos Blanco
Comentado en México el 7 de abril de 2025
el terminado no es lo ideal
Carlos Blanco
Comentado en México el 7 de abril de 2025
el terminado no es lo ideal
Carlos Blanco
Comentado en México el 7 de abril de 2025
el terminado no es lo ideal
Carlos Blanco
Comentado en México el 7 de abril de 2025
el terminado no es lo ideal
Carlos Blanco
Comentado en México el 7 de abril de 2025
el terminado no es lo ideal
Carlos Blanco
Comentado en México el 7 de abril de 2025
el terminado no es lo ideal
Carlos Blanco
Comentado en México el 7 de abril de 2025
el terminado no es lo ideal
Carlos Blanco
Comentado en México el 7 de abril de 2025
el terminado no es lo ideal
Amb
Comentado en los Estados Unidos el 14 de julio de 2024
Buyer beware. If you’re looking for a game table this is not your table unless you have your own tools and are willing to purchase more supplies to make it work and make it sturdy. The installation instructions were horrible. The pictures (no words) were very confusing but we finally put the table together. When we picked it up to move it, the support bars on the bottom completely pulled out of the sub-par particle board and left gaping holes where the screws had been. When I tried to return it, they did not provide shipping. Because it would cost more to send it back than what we paid for it, we wound up buying some plywood and cutting it into the same shape as the table (only smaller) and attaching it to the underside of the table and then attaching the legs to the good plywood. We also had to glue all the cup holders into place because they were not attached when it arrived.
Amb
Comentado en los Estados Unidos el 14 de julio de 2024
Buyer beware. If you’re looking for a game table this is not your table unless you have your own tools and are willing to purchase more supplies to make it work and make it sturdy. The installation instructions were horrible. The pictures (no words) were very confusing but we finally put the table together. When we picked it up to move it, the support bars on the bottom completely pulled out of the sub-par particle board and left gaping holes where the screws had been. When I tried to return it, they did not provide shipping. Because it would cost more to send it back than what we paid for it, we wound up buying some plywood and cutting it into the same shape as the table (only smaller) and attaching it to the underside of the table and then attaching the legs to the good plywood. We also had to glue all the cup holders into place because they were not attached when it arrived.
Amb
Comentado en los Estados Unidos el 14 de julio de 2024
Buyer beware. If you’re looking for a game table this is not your table unless you have your own tools and are willing to purchase more supplies to make it work and make it sturdy. The installation instructions were horrible. The pictures (no words) were very confusing but we finally put the table together. When we picked it up to move it, the support bars on the bottom completely pulled out of the sub-par particle board and left gaping holes where the screws had been. When I tried to return it, they did not provide shipping. Because it would cost more to send it back than what we paid for it, we wound up buying some plywood and cutting it into the same shape as the table (only smaller) and attaching it to the underside of the table and then attaching the legs to the good plywood. We also had to glue all the cup holders into place because they were not attached when it arrived.
Amb
Comentado en los Estados Unidos el 14 de julio de 2024
Buyer beware. If you’re looking for a game table this is not your table unless you have your own tools and are willing to purchase more supplies to make it work and make it sturdy. The installation instructions were horrible. The pictures (no words) were very confusing but we finally put the table together. When we picked it up to move it, the support bars on the bottom completely pulled out of the sub-par particle board and left gaping holes where the screws had been. When I tried to return it, they did not provide shipping. Because it would cost more to send it back than what we paid for it, we wound up buying some plywood and cutting it into the same shape as the table (only smaller) and attaching it to the underside of the table and then attaching the legs to the good plywood. We also had to glue all the cup holders into place because they were not attached when it arrived.
Amb
Comentado en los Estados Unidos el 14 de julio de 2024
Buyer beware. If you’re looking for a game table this is not your table unless you have your own tools and are willing to purchase more supplies to make it work and make it sturdy. The installation instructions were horrible. The pictures (no words) were very confusing but we finally put the table together. When we picked it up to move it, the support bars on the bottom completely pulled out of the sub-par particle board and left gaping holes where the screws had been. When I tried to return it, they did not provide shipping. Because it would cost more to send it back than what we paid for it, we wound up buying some plywood and cutting it into the same shape as the table (only smaller) and attaching it to the underside of the table and then attaching the legs to the good plywood. We also had to glue all the cup holders into place because they were not attached when it arrived.
Amb
Comentado en los Estados Unidos el 14 de julio de 2024
Buyer beware. If you’re looking for a game table this is not your table unless you have your own tools and are willing to purchase more supplies to make it work and make it sturdy. The installation instructions were horrible. The pictures (no words) were very confusing but we finally put the table together. When we picked it up to move it, the support bars on the bottom completely pulled out of the sub-par particle board and left gaping holes where the screws had been. When I tried to return it, they did not provide shipping. Because it would cost more to send it back than what we paid for it, we wound up buying some plywood and cutting it into the same shape as the table (only smaller) and attaching it to the underside of the table and then attaching the legs to the good plywood. We also had to glue all the cup holders into place because they were not attached when it arrived.
Amb
Comentado en los Estados Unidos el 14 de julio de 2024
Buyer beware. If you’re looking for a game table this is not your table unless you have your own tools and are willing to purchase more supplies to make it work and make it sturdy. The installation instructions were horrible. The pictures (no words) were very confusing but we finally put the table together. When we picked it up to move it, the support bars on the bottom completely pulled out of the sub-par particle board and left gaping holes where the screws had been. When I tried to return it, they did not provide shipping. Because it would cost more to send it back than what we paid for it, we wound up buying some plywood and cutting it into the same shape as the table (only smaller) and attaching it to the underside of the table and then attaching the legs to the good plywood. We also had to glue all the cup holders into place because they were not attached when it arrived.
Amb
Comentado en los Estados Unidos el 14 de julio de 2024
Buyer beware. If you’re looking for a game table this is not your table unless you have your own tools and are willing to purchase more supplies to make it work and make it sturdy. The installation instructions were horrible. The pictures (no words) were very confusing but we finally put the table together. When we picked it up to move it, the support bars on the bottom completely pulled out of the sub-par particle board and left gaping holes where the screws had been. When I tried to return it, they did not provide shipping. Because it would cost more to send it back than what we paid for it, we wound up buying some plywood and cutting it into the same shape as the table (only smaller) and attaching it to the underside of the table and then attaching the legs to the good plywood. We also had to glue all the cup holders into place because they were not attached when it arrived.
Jordan Haschak
Comentado en los Estados Unidos el 29 de marzo de 2023
This thing was a pain to put together. the photo shows it folded in half which would’ve been perfect but unfortunately it doesn’t collapse. The cup holders aren’t attached, they had a bunch of dried up glue on them. After putting it together though it was sturdy and pretty good quality minus the cup holders.
Jordan Haschak
Comentado en los Estados Unidos el 29 de marzo de 2023
This thing was a pain to put together. the photo shows it folded in half which would’ve been perfect but unfortunately it doesn’t collapse. The cup holders aren’t attached, they had a bunch of dried up glue on them. After putting it together though it was sturdy and pretty good quality minus the cup holders.
Jordan Haschak
Comentado en los Estados Unidos el 29 de marzo de 2023
This thing was a pain to put together. the photo shows it folded in half which would’ve been perfect but unfortunately it doesn’t collapse. The cup holders aren’t attached, they had a bunch of dried up glue on them. After putting it together though it was sturdy and pretty good quality minus the cup holders.
Jordan Haschak
Comentado en los Estados Unidos el 29 de marzo de 2023
This thing was a pain to put together. the photo shows it folded in half which would’ve been perfect but unfortunately it doesn’t collapse. The cup holders aren’t attached, they had a bunch of dried up glue on them. After putting it together though it was sturdy and pretty good quality minus the cup holders.
Jordan Haschak
Comentado en los Estados Unidos el 29 de marzo de 2023
This thing was a pain to put together. the photo shows it folded in half which would’ve been perfect but unfortunately it doesn’t collapse. The cup holders aren’t attached, they had a bunch of dried up glue on them. After putting it together though it was sturdy and pretty good quality minus the cup holders.
Jordan Haschak
Comentado en los Estados Unidos el 29 de marzo de 2023
This thing was a pain to put together. the photo shows it folded in half which would’ve been perfect but unfortunately it doesn’t collapse. The cup holders aren’t attached, they had a bunch of dried up glue on them. After putting it together though it was sturdy and pretty good quality minus the cup holders.
Jordan Haschak
Comentado en los Estados Unidos el 29 de marzo de 2023
This thing was a pain to put together. the photo shows it folded in half which would’ve been perfect but unfortunately it doesn’t collapse. The cup holders aren’t attached, they had a bunch of dried up glue on them. After putting it together though it was sturdy and pretty good quality minus the cup holders.
Jordan Haschak
Comentado en los Estados Unidos el 29 de marzo de 2023
This thing was a pain to put together. the photo shows it folded in half which would’ve been perfect but unfortunately it doesn’t collapse. The cup holders aren’t attached, they had a bunch of dried up glue on them. After putting it together though it was sturdy and pretty good quality minus the cup holders.
Customer
Comentado en los Estados Unidos el 15 de diciembre de 2023
Great little table for poker games . When we have all 8 seats filled how ever it is quite cramped . But if only 5-6 people are at the table it’s fine .
Customer
Comentado en los Estados Unidos el 15 de diciembre de 2023
Great little table for poker games . When we have all 8 seats filled how ever it is quite cramped . But if only 5-6 people are at the table it’s fine .
Customer
Comentado en los Estados Unidos el 15 de diciembre de 2023
Great little table for poker games . When we have all 8 seats filled how ever it is quite cramped . But if only 5-6 people are at the table it’s fine .
Customer
Comentado en los Estados Unidos el 15 de diciembre de 2023
Great little table for poker games . When we have all 8 seats filled how ever it is quite cramped . But if only 5-6 people are at the table it’s fine .
Customer
Comentado en los Estados Unidos el 15 de diciembre de 2023
Great little table for poker games . When we have all 8 seats filled how ever it is quite cramped . But if only 5-6 people are at the table it’s fine .
Customer
Comentado en los Estados Unidos el 15 de diciembre de 2023
Great little table for poker games . When we have all 8 seats filled how ever it is quite cramped . But if only 5-6 people are at the table it’s fine .
Customer
Comentado en los Estados Unidos el 15 de diciembre de 2023
Great little table for poker games . When we have all 8 seats filled how ever it is quite cramped . But if only 5-6 people are at the table it’s fine .
Customer
Comentado en los Estados Unidos el 15 de diciembre de 2023
Great little table for poker games . When we have all 8 seats filled how ever it is quite cramped . But if only 5-6 people are at the table it’s fine .
Kim&Chris
Comentado en los Estados Unidos el 25 de diciembre de 2021
You get what you pay for..cups sit in fabric. I would set the torque on the drill to lowest and work your way up. You are screwing into composite so you don't want to strip it. The brackets that hold the legs on are very flimsy. I suspect this company makes the same table for others but it's marketed under different names which is standard for the cheap stuff. When I installed the legs I did it in the collapsed position so atleast one could lay flat. If you do store this I'm confident the cushion will get compresses while resting sideways in the upright position. The cup holder also fall out to easily when on its side. I will update after 6 months.
Kim&Chris
Comentado en los Estados Unidos el 25 de diciembre de 2021
You get what you pay for..cups sit in fabric. I would set the torque on the drill to lowest and work your way up. You are screwing into composite so you don't want to strip it. The brackets that hold the legs on are very flimsy. I suspect this company makes the same table for others but it's marketed under different names which is standard for the cheap stuff. When I installed the legs I did it in the collapsed position so atleast one could lay flat. If you do store this I'm confident the cushion will get compresses while resting sideways in the upright position. The cup holder also fall out to easily when on its side. I will update after 6 months.
Kim&Chris
Comentado en los Estados Unidos el 25 de diciembre de 2021
You get what you pay for..cups sit in fabric. I would set the torque on the drill to lowest and work your way up. You are screwing into composite so you don't want to strip it. The brackets that hold the legs on are very flimsy. I suspect this company makes the same table for others but it's marketed under different names which is standard for the cheap stuff. When I installed the legs I did it in the collapsed position so atleast one could lay flat. If you do store this I'm confident the cushion will get compresses while resting sideways in the upright position. The cup holder also fall out to easily when on its side. I will update after 6 months.
Kim&Chris
Comentado en los Estados Unidos el 25 de diciembre de 2021
You get what you pay for..cups sit in fabric. I would set the torque on the drill to lowest and work your way up. You are screwing into composite so you don't want to strip it. The brackets that hold the legs on are very flimsy. I suspect this company makes the same table for others but it's marketed under different names which is standard for the cheap stuff. When I installed the legs I did it in the collapsed position so atleast one could lay flat. If you do store this I'm confident the cushion will get compresses while resting sideways in the upright position. The cup holder also fall out to easily when on its side. I will update after 6 months.
Kim&Chris
Comentado en los Estados Unidos el 25 de diciembre de 2021
You get what you pay for..cups sit in fabric. I would set the torque on the drill to lowest and work your way up. You are screwing into composite so you don't want to strip it. The brackets that hold the legs on are very flimsy. I suspect this company makes the same table for others but it's marketed under different names which is standard for the cheap stuff. When I installed the legs I did it in the collapsed position so atleast one could lay flat. If you do store this I'm confident the cushion will get compresses while resting sideways in the upright position. The cup holder also fall out to easily when on its side. I will update after 6 months.
Kim&Chris
Comentado en los Estados Unidos el 25 de diciembre de 2021
You get what you pay for..cups sit in fabric. I would set the torque on the drill to lowest and work your way up. You are screwing into composite so you don't want to strip it. The brackets that hold the legs on are very flimsy. I suspect this company makes the same table for others but it's marketed under different names which is standard for the cheap stuff. When I installed the legs I did it in the collapsed position so atleast one could lay flat. If you do store this I'm confident the cushion will get compresses while resting sideways in the upright position. The cup holder also fall out to easily when on its side. I will update after 6 months.
Kim&Chris
Comentado en los Estados Unidos el 25 de diciembre de 2021
You get what you pay for..cups sit in fabric. I would set the torque on the drill to lowest and work your way up. You are screwing into composite so you don't want to strip it. The brackets that hold the legs on are very flimsy. I suspect this company makes the same table for others but it's marketed under different names which is standard for the cheap stuff. When I installed the legs I did it in the collapsed position so atleast one could lay flat. If you do store this I'm confident the cushion will get compresses while resting sideways in the upright position. The cup holder also fall out to easily when on its side. I will update after 6 months.
Kim&Chris
Comentado en los Estados Unidos el 25 de diciembre de 2021
You get what you pay for..cups sit in fabric. I would set the torque on the drill to lowest and work your way up. You are screwing into composite so you don't want to strip it. The brackets that hold the legs on are very flimsy. I suspect this company makes the same table for others but it's marketed under different names which is standard for the cheap stuff. When I installed the legs I did it in the collapsed position so atleast one could lay flat. If you do store this I'm confident the cushion will get compresses while resting sideways in the upright position. The cup holder also fall out to easily when on its side. I will update after 6 months.