No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Válvulas de barrido y cierre ajustables
El cierre de puerta Dynasty Hardware 4401 Series cuenta con dos válvulas de ajuste. Una válvula ajusta la velocidad de cierre y la otra válvula se utiliza para ajustar la velocidad de bloqueo. La llave Allen para ajustar el cierrapuertas está incluida.
Parte trasera ajustable
El cierrapuertas de la serie Dynasty Hardware 4401 ofrece una válvula de retención trasera ajustable. El ajuste de la comprobación trasera controla la cantidad de resistencia a la apertura de la puerta más allá de un punto seleccionado. Esta función controla hasta qué punto se puede abrir la puerta para proteger las paredes. La comprobación de atrás se utiliza para ralentizar la puerta si alguien tira la puerta abierta, o si el viento iba a atrapar la puerta, y abrirla. La comprobación trasera se utiliza para reducir la velocidad de la puerta, no para detener la puerta.
Opciones de montaje para cierrapuertas de la serie 4401
Ellos Dynasty Hardware 4401 Series cierrapuertas se pueden montar en brazo regular, brazo paralelo o jamba. Cada cierrapuertas incluye un soporte de brazo paralelo y todos los sujetadores necesarios para la instalación.
Larry Trammel
Comentado en los Estados Unidos el 8 de noviembre de 2024
Worked perfectly thanks
Joseph H. Mckenzie
Comentado en los Estados Unidos el 11 de marzo de 2023
This was a replacement for a 20+ year old closer I had in place. It worked perfectly. It was easy to install and had all the right parts. Very good commercial quality.
JUAN JOSE TINAJERO ENRIQUEZ
Comentado en México el 20 de mayo de 2022
Hasta ahorita esta trabajando bien el automático recomendado
Noah
Comentado en Canadá el 12 de septiembre de 2020
First of all I want to say that the closer is extremely well manufactured and the mechanisms are incredibly heavy duty. This is not a cheap facimile or something. The only piece of it even remotely less than heavy duty is the silver color, which is plastic, but is just a decorative cover and painted. I was not dissapointed with the general build quality.I will say that the main issue I had was due to a drafting error on the template. The system can be mounted in 3 different ways, and I needed to mount mine on the pull side. The template holes are in the right spot, but the template has text that makes it appear that it is flippable for right to left. It is NOT. You MUST mount the piston so that the top of the spot where the arm mounts is flush with the top of the door.If you use the template this way, you run the risk of mounting it 1/4" too low. I did this, and couldn't remount it higher because the holes in the door would be too close to the old holes. The drafter of the template made it look like you could use this as-is for the left side, but you cannot! Flip the page over, use the template for the left side on the other side of the paper.(see the attached drawing)I ended up working with a friend with a metal lathe to get a spacer fabricated so I could leave the piston mounted low, and still clear the top of the door with the arm.Other than that you should be ok ;-)
Aussie in Canada
Comentado en Canadá el 18 de agosto de 2019
Easy to install, lots of adjustments to fine tune it so you don't cut the cat in half. Will purchase more.
Science Boy
Comentado en Canadá el 18 de diciembre de 2018
I wasn't exactly inspired by the 'Dynasty' name, but this is a nice looking unit with a cast iron body. It feels like quality. I expect it to last for a good while on the front door of our retail store. If it doesn't I will be sure to update this review!The product was well packaged and the included templates seemed good. Of course the written instructions included the usual Chinglish/OCR type gobbledegook, but there's enough that is intelligible for you to figure it out. Just be sure to mount it with the adjustment screws facing out, not towards the door! Talking of which, the screws are, going from the 'square' end to the 'round' end: Latch speed, main speed, backcheck force.
Productos recomendados
Mex $450.00
Mex $ 216 .00 Mex $216.00
Mex $6,968.21
Mex $ 1,881 .00 Mex $1,881.00
Mex $576.01
Mex $ 282 .00 Mex $282.00