No hay artículos en el carro
No hay artículos en el carroMás información del producto
DREMEL
Hoy en día, Dremel se ha ganado una reputación entre los amantes del bricolaje y los aficionados a las manualidades gracias a la calidad y el rendimiento de sus productos. Las herramientas Dremel se consideran la solución para muchos de los trabajos y las tareas difíciles que requieren especial atención a los detalles, además de ser las herramientas predilectas de profesionales y aficionados a las manualidades. Entre los que se decantan por las herramientas Dremel se encuentran desde carpinteros y cerrajeros hasta mecánicos de automóviles y manitas.
La marca Dremel ofrece las mejores herramientas con la máxima calidad, la mejor experiencia y la satisfacción de lograr un trabajo bien hecho. Tanto si necesita cortar como amolar, lijar o grabar, con Dremel obtendrá un resultado rápido, y por supuesto, con unas herramientas muy cómodas y sencillas de usar.
Customer
Comentado en Canadá el 11 de marzo de 2025
Fits Dremel 290 and engraves. That's all I wanted.
Customer
Comentado en Canadá el 11 de marzo de 2025
Fits Dremel 290 and engraves. That's all I wanted.
Customer
Comentado en Canadá el 11 de marzo de 2025
Fits Dremel 290 and engraves. That's all I wanted.
Customer
Comentado en Canadá el 11 de marzo de 2025
Fits Dremel 290 and engraves. That's all I wanted.
Customer
Comentado en Canadá el 11 de marzo de 2025
Fits Dremel 290 and engraves. That's all I wanted.
Customer
Comentado en Canadá el 11 de marzo de 2025
Fits Dremel 290 and engraves. That's all I wanted.
Customer
Comentado en Canadá el 11 de marzo de 2025
Fits Dremel 290 and engraves. That's all I wanted.
Customer
Comentado en Canadá el 11 de marzo de 2025
Fits Dremel 290 and engraves. That's all I wanted.
Jay Ellis
Comentado en los Estados Unidos el 14 de julio de 2024
I used it in my dremel to engrave a name, small sized, on metal. It turned out great!
Jay Ellis
Comentado en los Estados Unidos el 14 de julio de 2024
I used it in my dremel to engrave a name, small sized, on metal. It turned out great!
Jay Ellis
Comentado en los Estados Unidos el 14 de julio de 2024
I used it in my dremel to engrave a name, small sized, on metal. It turned out great!
Jay Ellis
Comentado en los Estados Unidos el 14 de julio de 2024
I used it in my dremel to engrave a name, small sized, on metal. It turned out great!
Jay Ellis
Comentado en los Estados Unidos el 14 de julio de 2024
I used it in my dremel to engrave a name, small sized, on metal. It turned out great!
Jay Ellis
Comentado en los Estados Unidos el 14 de julio de 2024
I used it in my dremel to engrave a name, small sized, on metal. It turned out great!
Jay Ellis
Comentado en los Estados Unidos el 14 de julio de 2024
I used it in my dremel to engrave a name, small sized, on metal. It turned out great!
Jay Ellis
Comentado en los Estados Unidos el 14 de julio de 2024
I used it in my dremel to engrave a name, small sized, on metal. It turned out great!
Kindle Customer
Comentado en los Estados Unidos el 1 de junio de 2024
There were supposedly to be six rolls of these rolls and there was one.I had a project I was working on and needed 6 rolls. Very disappointed.
NShuman
Comentado en los Estados Unidos el 28 de mayo de 2024
I only received one roll, be aware that you will not receive the various six that are advertised in the picture.
Mull
Comentado en el Reino Unido el 12 de septiembre de 2024
Good quality, easy to fit, works well, cheaper than anywhere else that I searched.
Mull
Comentado en el Reino Unido el 12 de septiembre de 2024
Good quality, easy to fit, works well, cheaper than anywhere else that I searched.
Mull
Comentado en el Reino Unido el 12 de septiembre de 2024
Good quality, easy to fit, works well, cheaper than anywhere else that I searched.
Mull
Comentado en el Reino Unido el 12 de septiembre de 2024
Good quality, easy to fit, works well, cheaper than anywhere else that I searched.
Mull
Comentado en el Reino Unido el 12 de septiembre de 2024
Good quality, easy to fit, works well, cheaper than anywhere else that I searched.
Mull
Comentado en el Reino Unido el 12 de septiembre de 2024
Good quality, easy to fit, works well, cheaper than anywhere else that I searched.
Mull
Comentado en el Reino Unido el 12 de septiembre de 2024
Good quality, easy to fit, works well, cheaper than anywhere else that I searched.
Mull
Comentado en el Reino Unido el 12 de septiembre de 2024
Good quality, easy to fit, works well, cheaper than anywhere else that I searched.
Julio Rojas
Comentado en México el 11 de julio de 2022
Lo quise ocupar para grabar en vidrio y como en 5 min se le desgasto la punta y ya no grababa nada, pésimo y muy caro
Julio Rojas
Comentado en México el 11 de julio de 2022
Lo quise ocupar para grabar en vidrio y como en 5 min se le desgasto la punta y ya no grababa nada, pésimo y muy caro
Julio Rojas
Comentado en México el 11 de julio de 2022
Lo quise ocupar para grabar en vidrio y como en 5 min se le desgasto la punta y ya no grababa nada, pésimo y muy caro
Julio Rojas
Comentado en México el 11 de julio de 2022
Lo quise ocupar para grabar en vidrio y como en 5 min se le desgasto la punta y ya no grababa nada, pésimo y muy caro
Julio Rojas
Comentado en México el 11 de julio de 2022
Lo quise ocupar para grabar en vidrio y como en 5 min se le desgasto la punta y ya no grababa nada, pésimo y muy caro
Julio Rojas
Comentado en México el 11 de julio de 2022
Lo quise ocupar para grabar en vidrio y como en 5 min se le desgasto la punta y ya no grababa nada, pésimo y muy caro
Julio Rojas
Comentado en México el 11 de julio de 2022
Lo quise ocupar para grabar en vidrio y como en 5 min se le desgasto la punta y ya no grababa nada, pésimo y muy caro
Julio Rojas
Comentado en México el 11 de julio de 2022
Lo quise ocupar para grabar en vidrio y como en 5 min se le desgasto la punta y ya no grababa nada, pésimo y muy caro
初心者
Comentado en Japón el 21 de febrero de 2022
No se pudo cargar el contenido.
初心者
Comentado en Japón el 21 de febrero de 2022
No se pudo cargar el contenido.
初心者
Comentado en Japón el 21 de febrero de 2022
No se pudo cargar el contenido.
初心者
Comentado en Japón el 21 de febrero de 2022
No se pudo cargar el contenido.
初心者
Comentado en Japón el 21 de febrero de 2022
No se pudo cargar el contenido.
初心者
Comentado en Japón el 21 de febrero de 2022
No se pudo cargar el contenido.
初心者
Comentado en Japón el 21 de febrero de 2022
No se pudo cargar el contenido.
初心者
Comentado en Japón el 21 de febrero de 2022
No se pudo cargar el contenido.
ahinojosa
Comentado en México el 6 de mayo de 2019
Buen producto
ahinojosa
Comentado en México el 6 de mayo de 2019
Buen producto
ahinojosa
Comentado en México el 6 de mayo de 2019
Buen producto
ahinojosa
Comentado en México el 6 de mayo de 2019
Buen producto
ahinojosa
Comentado en México el 6 de mayo de 2019
Buen producto
ahinojosa
Comentado en México el 6 de mayo de 2019
Buen producto
ahinojosa
Comentado en México el 6 de mayo de 2019
Buen producto
ahinojosa
Comentado en México el 6 de mayo de 2019
Buen producto
K. Penney
Comentado en los Estados Unidos el 27 de junio de 2012
I have a CNC machine that I've been using to do several engravings (maybe I'll post a video of this in action) and was struggling with the set of engraving bits I bought specifically for a dremel. It was a kit of engraving bits that I also got on Amazon so I thought that was really all I needed and boy was I wrong. I thought maybe my dremel wasn't powerful enough to do the engravings since the results I was getting with the first set of engraving bits were turning out jagged and not very clean. It also wasn't cutting very deep into the metal, so when the machine was moving it would get caught on spots and I could see the bits bending. Not good. I was afraid they were going to break, but they didn't. They didn't really work well either.So I thought well, maybe these bits aren't intended for hard metals (even though they should have worked with hard metals, or maybe I just didn't look into it enough) so I ended up finding the Dremel 9929 Engraver Diamond Point Bit. From the second I put this on the dremel my results were 1000x better! I was getting very clean precision engravings in some pretty hard metal. Not sure exactly what the metal was, but I was engraving a tactical combat knife so it had to be some pretty hard metal and it engraved like a champ! I haven't engraved too much stuff, but it has already been miles better than any other engraving bit I've tried (I'm a newb to engraving though). Anyone doing some simple CNC machining with a dremel, this bit is a must. Next I want to try glass and stone. We'll see how that goes...
K. Penney
Comentado en los Estados Unidos el 27 de junio de 2012
I have a CNC machine that I've been using to do several engravings (maybe I'll post a video of this in action) and was struggling with the set of engraving bits I bought specifically for a dremel. It was a kit of engraving bits that I also got on Amazon so I thought that was really all I needed and boy was I wrong. I thought maybe my dremel wasn't powerful enough to do the engravings since the results I was getting with the first set of engraving bits were turning out jagged and not very clean. It also wasn't cutting very deep into the metal, so when the machine was moving it would get caught on spots and I could see the bits bending. Not good. I was afraid they were going to break, but they didn't. They didn't really work well either.So I thought well, maybe these bits aren't intended for hard metals (even though they should have worked with hard metals, or maybe I just didn't look into it enough) so I ended up finding the Dremel 9929 Engraver Diamond Point Bit. From the second I put this on the dremel my results were 1000x better! I was getting very clean precision engravings in some pretty hard metal. Not sure exactly what the metal was, but I was engraving a tactical combat knife so it had to be some pretty hard metal and it engraved like a champ! I haven't engraved too much stuff, but it has already been miles better than any other engraving bit I've tried (I'm a newb to engraving though). Anyone doing some simple CNC machining with a dremel, this bit is a must. Next I want to try glass and stone. We'll see how that goes...
K. Penney
Comentado en los Estados Unidos el 27 de junio de 2012
I have a CNC machine that I've been using to do several engravings (maybe I'll post a video of this in action) and was struggling with the set of engraving bits I bought specifically for a dremel. It was a kit of engraving bits that I also got on Amazon so I thought that was really all I needed and boy was I wrong. I thought maybe my dremel wasn't powerful enough to do the engravings since the results I was getting with the first set of engraving bits were turning out jagged and not very clean. It also wasn't cutting very deep into the metal, so when the machine was moving it would get caught on spots and I could see the bits bending. Not good. I was afraid they were going to break, but they didn't. They didn't really work well either.So I thought well, maybe these bits aren't intended for hard metals (even though they should have worked with hard metals, or maybe I just didn't look into it enough) so I ended up finding the Dremel 9929 Engraver Diamond Point Bit. From the second I put this on the dremel my results were 1000x better! I was getting very clean precision engravings in some pretty hard metal. Not sure exactly what the metal was, but I was engraving a tactical combat knife so it had to be some pretty hard metal and it engraved like a champ! I haven't engraved too much stuff, but it has already been miles better than any other engraving bit I've tried (I'm a newb to engraving though). Anyone doing some simple CNC machining with a dremel, this bit is a must. Next I want to try glass and stone. We'll see how that goes...
K. Penney
Comentado en los Estados Unidos el 27 de junio de 2012
I have a CNC machine that I've been using to do several engravings (maybe I'll post a video of this in action) and was struggling with the set of engraving bits I bought specifically for a dremel. It was a kit of engraving bits that I also got on Amazon so I thought that was really all I needed and boy was I wrong. I thought maybe my dremel wasn't powerful enough to do the engravings since the results I was getting with the first set of engraving bits were turning out jagged and not very clean. It also wasn't cutting very deep into the metal, so when the machine was moving it would get caught on spots and I could see the bits bending. Not good. I was afraid they were going to break, but they didn't. They didn't really work well either.So I thought well, maybe these bits aren't intended for hard metals (even though they should have worked with hard metals, or maybe I just didn't look into it enough) so I ended up finding the Dremel 9929 Engraver Diamond Point Bit. From the second I put this on the dremel my results were 1000x better! I was getting very clean precision engravings in some pretty hard metal. Not sure exactly what the metal was, but I was engraving a tactical combat knife so it had to be some pretty hard metal and it engraved like a champ! I haven't engraved too much stuff, but it has already been miles better than any other engraving bit I've tried (I'm a newb to engraving though). Anyone doing some simple CNC machining with a dremel, this bit is a must. Next I want to try glass and stone. We'll see how that goes...
K. Penney
Comentado en los Estados Unidos el 27 de junio de 2012
I have a CNC machine that I've been using to do several engravings (maybe I'll post a video of this in action) and was struggling with the set of engraving bits I bought specifically for a dremel. It was a kit of engraving bits that I also got on Amazon so I thought that was really all I needed and boy was I wrong. I thought maybe my dremel wasn't powerful enough to do the engravings since the results I was getting with the first set of engraving bits were turning out jagged and not very clean. It also wasn't cutting very deep into the metal, so when the machine was moving it would get caught on spots and I could see the bits bending. Not good. I was afraid they were going to break, but they didn't. They didn't really work well either.So I thought well, maybe these bits aren't intended for hard metals (even though they should have worked with hard metals, or maybe I just didn't look into it enough) so I ended up finding the Dremel 9929 Engraver Diamond Point Bit. From the second I put this on the dremel my results were 1000x better! I was getting very clean precision engravings in some pretty hard metal. Not sure exactly what the metal was, but I was engraving a tactical combat knife so it had to be some pretty hard metal and it engraved like a champ! I haven't engraved too much stuff, but it has already been miles better than any other engraving bit I've tried (I'm a newb to engraving though). Anyone doing some simple CNC machining with a dremel, this bit is a must. Next I want to try glass and stone. We'll see how that goes...
K. Penney
Comentado en los Estados Unidos el 27 de junio de 2012
I have a CNC machine that I've been using to do several engravings (maybe I'll post a video of this in action) and was struggling with the set of engraving bits I bought specifically for a dremel. It was a kit of engraving bits that I also got on Amazon so I thought that was really all I needed and boy was I wrong. I thought maybe my dremel wasn't powerful enough to do the engravings since the results I was getting with the first set of engraving bits were turning out jagged and not very clean. It also wasn't cutting very deep into the metal, so when the machine was moving it would get caught on spots and I could see the bits bending. Not good. I was afraid they were going to break, but they didn't. They didn't really work well either.So I thought well, maybe these bits aren't intended for hard metals (even though they should have worked with hard metals, or maybe I just didn't look into it enough) so I ended up finding the Dremel 9929 Engraver Diamond Point Bit. From the second I put this on the dremel my results were 1000x better! I was getting very clean precision engravings in some pretty hard metal. Not sure exactly what the metal was, but I was engraving a tactical combat knife so it had to be some pretty hard metal and it engraved like a champ! I haven't engraved too much stuff, but it has already been miles better than any other engraving bit I've tried (I'm a newb to engraving though). Anyone doing some simple CNC machining with a dremel, this bit is a must. Next I want to try glass and stone. We'll see how that goes...
K. Penney
Comentado en los Estados Unidos el 27 de junio de 2012
I have a CNC machine that I've been using to do several engravings (maybe I'll post a video of this in action) and was struggling with the set of engraving bits I bought specifically for a dremel. It was a kit of engraving bits that I also got on Amazon so I thought that was really all I needed and boy was I wrong. I thought maybe my dremel wasn't powerful enough to do the engravings since the results I was getting with the first set of engraving bits were turning out jagged and not very clean. It also wasn't cutting very deep into the metal, so when the machine was moving it would get caught on spots and I could see the bits bending. Not good. I was afraid they were going to break, but they didn't. They didn't really work well either.So I thought well, maybe these bits aren't intended for hard metals (even though they should have worked with hard metals, or maybe I just didn't look into it enough) so I ended up finding the Dremel 9929 Engraver Diamond Point Bit. From the second I put this on the dremel my results were 1000x better! I was getting very clean precision engravings in some pretty hard metal. Not sure exactly what the metal was, but I was engraving a tactical combat knife so it had to be some pretty hard metal and it engraved like a champ! I haven't engraved too much stuff, but it has already been miles better than any other engraving bit I've tried (I'm a newb to engraving though). Anyone doing some simple CNC machining with a dremel, this bit is a must. Next I want to try glass and stone. We'll see how that goes...
K. Penney
Comentado en los Estados Unidos el 27 de junio de 2012
I have a CNC machine that I've been using to do several engravings (maybe I'll post a video of this in action) and was struggling with the set of engraving bits I bought specifically for a dremel. It was a kit of engraving bits that I also got on Amazon so I thought that was really all I needed and boy was I wrong. I thought maybe my dremel wasn't powerful enough to do the engravings since the results I was getting with the first set of engraving bits were turning out jagged and not very clean. It also wasn't cutting very deep into the metal, so when the machine was moving it would get caught on spots and I could see the bits bending. Not good. I was afraid they were going to break, but they didn't. They didn't really work well either.So I thought well, maybe these bits aren't intended for hard metals (even though they should have worked with hard metals, or maybe I just didn't look into it enough) so I ended up finding the Dremel 9929 Engraver Diamond Point Bit. From the second I put this on the dremel my results were 1000x better! I was getting very clean precision engravings in some pretty hard metal. Not sure exactly what the metal was, but I was engraving a tactical combat knife so it had to be some pretty hard metal and it engraved like a champ! I haven't engraved too much stuff, but it has already been miles better than any other engraving bit I've tried (I'm a newb to engraving though). Anyone doing some simple CNC machining with a dremel, this bit is a must. Next I want to try glass and stone. We'll see how that goes...
Productos recomendados
Mex $239.00
Mex $ 121 .00 Mex $121.00
Mex $215.59
Mex $ 127 .00 Mex $127.00
Mex $708.00
Mex $ 318 .00 Mex $318.00