No hay artículos en el carro
No hay artículos en el carroMás información del producto
Tips and Recommendations
Recommended speed settings above
Sanding Bands
Great for shaping wood, smoothing fiberglass, sanding inside curves, other difficult places, and many more. Easily replace sanding bands on drums.
EZ407SA - EZ Drum Sanding Mandrel: Resilient rubber sleeve that makes it easier to switch between bands. Compatible with 1/2" diameter bands.
- Woods
- Fiberglass
- Rust Removal
- Metals
- Rubber
- Plastic
Tips and Recommendations
Recommended speed settings above
Sanding Discs
Sanding discs in fine, medium and coarse grades are made to fit mandrel 402 or EZ407. Great for rough shaping and smoothing wood and fiberglass, removing rust from metal surfaces, and shaping rubber surfaces.
- Woods
- Fiberglass
- Rust removal
- Metals
- Rubber
- Plastics
Tips and Recommendations
Recommended speed settings above
Abrasive Brushes and Buffs
Both abrasive brushes and buffs are great for detail cleaning and light sanding. Available in fine, medium and coarse grades.
Use with either mandrel 402 or EZ402.
- Metals
- Glass
- Woods
- Aluminum
- Plastics
Tips and Recommendations
Recommended speed settings above
Flapwheels
Grind and polish flat or contoured surfaces. Most effective when used as a finishing sander after heavier surface sanding and material removal is completed. Comes in fine and coarse grades.
- Woods
- Metals
- Plastics
Tips and Recommendations
Recommended speed settings above
Carbide Shaping Wheel
A powerful shaping tool that quickly and efficiently removes material. Easily creates compound curves and works on a variety of materials.
Do no use for cutting.
- Woods
- Fiberglass
- Laminates
- Plastics
- Leather
Never received
Comentado en los Estados Unidos el 29 de junio de 2024
Best thing for shaping.
Mr. Les Taylor
Comentado en el Reino Unido el 9 de noviembre de 2024
Amasing tool to shape small items with you Dremel (or look-a-like).
John H
Comentado en Canadá el 18 de junio de 2023
I got this to do Wood Carving and shaping with my Dremel. It does a great job. I would buy this again.
watchman
Comentado en el Reino Unido el 26 de diciembre de 2023
The Dremel 801 burr is vastly better than any other burr on the market, including any of the Kutzall range that everyone raves about. I have bought a lot of burrs and knowing what I do now, this is all you need for oak bowls and spoons, though the Kutzalls may have a use if you're operating in a taste vacuum and are doing those impossibly NAFF "wood sprites" so beloved of our American friends. Strangely, the 801 is impossible to find on the UK Amazon app, you have to go and buy it on the Amazon UK website itself - this is not the first time I've encountered "invisible" products on the Amazon app, so always check the actual website. If you look at the customer ratings for the 801 product, you'll see they are all EU and no UK ratings - bizarre.
Enrique López
Comentado en México el 24 de diciembre de 2023
Ya adquirí de la marca Dremel, otro disco de corte como este, sólo que no tenía éste modelo en particular. Es idóneo para hacer tallados cóncavos en madera, lo cual puede resultar en ahorro de otros sistemas, dependerá qué tanta experiencia se tenga y usos. La verdad, es que desde que me cambié de Truper a Dremel, la calidad y refacciones es más amplia para Dremel. Lo cual hace de mi trabajo como tallerista-artesanal de mucho ahorro de tiempo, frustraciones y a la larga, compras que en calidad por materiales, duran ¡muchísimo! Me llegó en tiempo y forma.
jRgmDz
Comentado en México el 28 de octubre de 2023
Cumple objetivamente con lo que brinda de información. Lo ocupo con un moto tool Truper sin mayor problema.
Arturo Garcia Smith
Comentado en México el 16 de noviembre de 2017
me gusto este disco por su calidad dremel, pero no sirve para cortar, solo para tallar en diferentes materiales blandos, lo use en pvc y madera. Recomendado para estos materiales.
Sports Dad
Comentado en los Estados Unidos el 26 de enero de 2017
This worked perfectly for coping inside corners for baseboards! I am replacing all of the baseboards in my house, and I tried using the coping saw to cope the inside corners, but it was very slow and would have really cost a lot of time to do it that way. So I started watching some videos on U-tube. I combined two of the ideas I saw, using the miter saw to trim the lower, straight portion of the baseboard, then used the dremel and this shaping wheel to cope the top, decorative, portion of the baseboard. It worked right through the pine and made the coping job so much easier. In case you are interested, there is one U-tube video that shows how to cope inside corners using the dremel. The other video on U-tube shows how to miter for inside corners using the dremel and a plane attachment, even though it mentions coping in the title. The corners look so much better when you cope vs just cutting at a 45 because most corners in home are not actually 90 degrees, but some variation of that. This tool "cuts" through the wood quickly. It is really more like sanding than cutting and it does generate a lot of sawdust! I would not use it for sanding, as it is too aggressive and eats through the wood quickly, but for removing wood and shaping it, this works well! Oh, be sure to use a pencil to highlight the edge of the cut before you start to cope it, it makes it so much easier to see what you need to remove!
Productos recomendados
Mex $839.00
Mex $ 411 .00 Mex $411.00
Mex $340.00
Mex $ 183 .00 Mex $183.00
Mex $582.95
Mex $ 268 .00 Mex $268.00
Mex $183.41
Mex $ 91 .00 Mex $91.00
Mex $1,604.03
Mex $ 769 .00 Mex $769.00