No hay artículos en el carro
No hay artículos en el carroMás información del producto
Metal Cutting
Cut-Off Wheels
For slicing and cutting metal and limited use on wood and plastics. Cut-off wheels make it easy to cut or slot bolts, screws, sheet metal, thin wood and plastic. The cut-off wheel cuts only along its edge; do not attempt to sand or cut curved holes with them. Use with the 402 Mandrel.
Fiberglass Reinforced Cut-Off Wheels
These cut-off wheels are reinforced with fiberglass for increased durability. For slicing and cutting metal including hardened steel. Cut-off wheels make it easy to cut bolts or screws or make slots in rusted or stripped bolts and screws for removal with a screwdriver. Use with the 402 Mandrel.
426B is a pack of 20 426 wheels.
Premium Metal Cutting Wheel
The 506CU cutting wheel features a super abrasive grit called cubic boron nitride or CBN. CBN used on a cut-off wheel allows the wheel to remain sharp longer, stay cool, and it won’t shrink. The 506CU cutting wheel lasts at least 20 times longer than our fiberglass-reinforced cutting wheels based on internal testing. In addition, with the Dremel premium metal cutting wheel you will spend less time changing wheels, save space storing replacement wheels and save money buying replacement wheels. Use with the 402 Mandrel.
Metal Cutting - EZ Lock
EZ Lock Thin Cut Reinforced Cut-Off Wheel
The EZ409 is a reinforced cut-off wheel ideal for making thin cuts in metal. It makes 2X more cuts compared to the Dremel 409. Use with the EZ402 Mandrel. 5 wheels per pack.
EZ Lock Reinforced Cut-Off Wheels
These EZ Lock Cut-Off Wheels are great for making cuts in metal. They make 2X more cuts then their regular counterpart (EZ426CU vs. 420 and EZ456 vs. 426). Use with the EZ402 Mandrel.
EZ406 includes 1 EZ402 Mandrel and 5 EZ456 wheels.
EZ426CU and EZ456 include 5 wheels per pack.
EZ456B is pack of 12 EZ456 wheels.
EZ Lock Premium Metal Cutting Wheel
The EZ506CU cutting wheel features a super abrasive grit called cubic boron nitride or CBN. CBN used on a cut-off wheel allows the wheel to remain sharp longer, stay cool, and it won’t shrink. The 506CU cutting wheel lasts at least 20 times longer than our fiberglass-reinforced cutting wheels based on internal testing. Use with the EZ402 Mandrel.
Wood, Plastic and Hard Material Cutting
Wood Cutting Wheels
Dremel 543 and EZ544 are both carbide cutting wheels for cutting and shaping on woods, fiberglass, plastics and laminates. Do not use them on metals. For 543 the mandrel is included; for EZ544 use the EZ402 Mandrel.
Dremel 546 Rip/Crosscut Blade is a long-lasting, mini circular blade that cuts both with and across the grain on wood and wood-like materials. It is designed to be used only in conjunction with the Dremel 670 Mini Saw Attachment. Therefore, no mandrel is used.
Plastic Cutting Wheels
The EZ476 is a reinforced cut-off wheel ideal for making clean cuts in plastics. Use with the EZ402 Mandrel. 5 wheels per pack.
Hard Materials Cutting Wheels
Dremel 545 and EZ545 are both diamond wheels great for cutting, sawing and carving hard materials; such as, marble, concrete, brick, porcelain, ceramics, hard epoxy and soft and hard wood. Do not use them on metals. For 545 use the 402 Mandrel (included); for EZ545 use the EZ402 Mandrel.
Drywall, Multipurpose, Tile and Grout Cutting Bits
Drywall Cutting Bit: 560
The Dremel 560 gives you fast, clean cuts in drywall.
Use with the Dremel Multipurpose Cutting Attachment (model 565).
Multipurpose Cutting Bit: 561
The Dremel 561 cuts hard wood up to 3/8" and soft wood up to 5/8". Also cuts plastics, fiberglass, drywall, laminate, aluminum and vinyl siding.
Use with the Dremel Multipurpose Cutting Attachment (model 565).
Tile Cutting Bit: 562
The Dremel 562 cuts ceramic wall tiles, cement board, and plaster.
Not for use on floor tiles.
Use with the Dremel Tile Cutting Attachment (model 566).
Carbide Grout Removal Bits: 569 and 570
The Dremel 569 and 570 are ideal for replacing wall and floor grout or removing grout to replace broken tiles.
Use with the Dremel Grout Removal Attachment (model 568).
Tips and Recommendations
EZ Lock System
The Dremel EZ Lock makes accessory changes as easy as PULL - TWIST - RELEASE. The one-piece mandrel design simplifies the process of changing cutting wheels.
Cutting Recommended Speed Settings
Refer to the above chart for recommended speed setting for cutting accessories.
Grout Removal Recommended Speed Settings
Refer to the above chart for recommended speed setting for grout removal accessories.
7723doug
Comentado en Canadá el 22 de septiembre de 2024
Was surprised at how robust these wheels were for buffing rust on auto body
paolo sala
Comentado en Italia el 19 de septiembre de 2024
TUTTO PERFETTO GRAZIE
MGB
Comentado en los Estados Unidos el 19 de junio de 2023
Ordered these after my supply went low. Needed one to cut through sections of cured, dried cow bone. Worked as good as I could expect with surprisingly little wear. I really appreciated the mounting washers that came with the set for a solid, secure mount.
Trust
Comentado en los Estados Unidos el 12 de noviembre de 2021
I like the washers that protects the disc from early failure.
gusanito
Comentado en México el 5 de diciembre de 2019
Perfecto para trabajos en detalle o pequeños!!
Joel Schlegel
Comentado en los Estados Unidos el 17 de agosto de 2018
I have been buying generic in these for a while and decided try the name brand ones and they seem to cut better and do last a lot longer. I actually bought the name brand by accident but will be buying them from now on. I use these cutting wheels often so I will appreciate the quality.
Productos recomendados
Mex $260.16
Mex $ 148 .00 Mex $148.00
Mex $114.84
Mex $ 58 .00 Mex $58.00