No hay artículos en el carro
No hay artículos en el carroMás información del producto
Punta de grabación
Patilla para guia
Potencia
Velocidad
RobScenity
Comentado en Canadá el 23 de febrero de 2025
Easy to use, quick to learn. I've only used it on glass and stainless steel so far, but it's performing beyond expectations. Very satisfied, would definitely recommend.
Raju
Comentado en India el 21 de febrero de 2025
Good but extra marking pin the box
Bertha
Comentado en México el 1 de abril de 2025
es bueno, pero no es tan fácil escribir con esto... con trabajos puedo poner alguna letra... me imaginé que fuera más sencillo
Carlos Hendrix
Comentado en México el 7 de julio de 2024
Útil para marcar material quirugico,cuchillos o herramientas, sirve para uso basico , hace mucho ruido a la hora de trabajar pero cumple su propósito
Carlos
Comentado en México el 16 de febrero de 2024
El producto funciona como se esperaba. Muy recomendable...
josue v.
Comentado en México el 25 de noviembre de 2024
Herramienta de muy buena calidad
jose
Comentado en los Estados Unidos el 7 de octubre de 2024
buena herramienta
Armando R.
Comentado en México el 30 de enero de 2024
Muy cómodo de usar, rápido y todo se trabaja de manera rápida, segura y divertida, buena compra.
Guillermo
Comentado en México el 18 de enero de 2024
Excelente equipo. 👍
ALFREDO DURAN HERRERA
Comentado en México el 12 de mayo de 2023
La mejor marca del mercado, entrega rápida y buen precio.
Sandra Domínguez
Comentado en México el 16 de noviembre de 2023
Es súper buen tamaño no hay problema al usarlo
هادي الخالديuser-M47DWU
Comentado en Arabia Saudita el 5 de marzo de 2022
وصل المنتج مفتوحا وهذا شيء غير جيدعلى العموم أنا راضٍ عن المنتج
Ben
Comentado en los Estados Unidos el 8 de noviembre de 2011
Works as intended, I use it for engraving hand tools. I purchased separately the diamond point dremel engraving bit. Cuts better than the one included with this engraver (see my review).Lighter than dremel rotary tools, and smaller, though the plastic seems to be of the same or similar quality.Stroke per minute dial works as described, engraving depth can also be adjusted by the pressure you apply with the tool, the bit (like the diamond bit), and how many passes you do. Engraving small initials is easy, making decorative glass would be more challenging and would require more skill, but this is not what I use it for. After a few tests on some scrap to get the feel of it, I was ready to go. I was pleased with the results from the tool, but my handwriting, not so much. Tool worked well.Included stencil works if the tool is help perfectly vertical to the engraving surface. Though the way the letters are stenciled, there are large gaps due to the thickness and design of the stencil. For example a letter B looks more like 13. Sometimes I used the stencil and then filled in the gaps by hand.It's very similar to writing with a large, vibrating, noisy pencil. If you have a steady hand you could easily write someone a letter on a piece of sheet metal.It is rather noisy, especially on the higher settings, lots of buzzing and rattling but doesn't retract from the functionality. This isn't the sort of thing that requires stealth anyway.I had no problems with the set screw when changing bits. I was prepared with a small flat bladed pocket type screwdriver and know how not to strip a screw. Snug it up and you're done. If the bit comes loose (which mine hasn't) snug it down a little more. If you start perspiring, grunting, or shaking violently while tightening it down, ease up. It's a set screw, not the lug nuts on your spare tire.Good price, Dremel is a name brand, and bits can be purchased at most hardware stores. I was unable to find the diamond bits at my local hardware stores so I just orded it with the engraver from Amazon.Good tool
Productos recomendados
Mex $1,485.00
Mex $ 653 .00 Mex $653.00
Mex $9,999.00
Mex $ 1,881 .00 Mex $1,881.00