No hay artículos en el carro
No hay artículos en el carroJesus
Comentado en México el 10 de junio de 2024
Cómo es de esperarse es de buena calidad muy práctico
Victor Hugo Montesinos
Comentado en México el 1 de diciembre de 2024
Accesorios Dremel, este es uno que te va ser muy útil, si eres uno de los que gusta hacer trabajos pequeños y necesitas una mesa para adaptar tu Dremel en una mesa-router, que mejor que lagarantía de Dremel.
Jaime R.
Comentado en México el 19 de abril de 2024
El artículo cumple con mis expectativas, requiere de manejo cuidadoso , pues al ser plástico , se podría averiar al darle uso un poco rudo .
Guadalupe Cadena
Comentado en México el 8 de agosto de 2023
Muy buen soporte para fresar.
Cliente de
Comentado en México el 6 de junio de 2023
de buena calidad, llegó a tiempo
Jesus Flores
Comentado en México el 27 de enero de 2023
Es debil. No es preciza si mueves abajo la cuerda se mueve la punta en su loacalizacion. Entonces es impreciza por diseño
Erosa
Comentado en México el 19 de junio de 2022
Buen soporte y manejo de ajustes para la herramienta rotativa, buena construcción y materiales plásticos de calidad. En algunas mesas de aficionados su sujeción puede ser complicada
Rafael A.
Comentado en México el 7 de enero de 2021
Excelente producto. Original y fácil de usar con manual e información Muy completa.Usó excelente con la herramienta. sí se requiere comprar el cortador especial para la herramienta. Pero eso lo indica al momento de la compra
frank lackenby
Comentado en el Reino Unido el 10 de febrero de 2020
I made both the hand rail and base rails in the photo. I’m not gonna try and convince you about dremel. I love em. I’ve got 4. I build dolls houses. If you want to work in miniature then you need one of these. Great addition to my tool kit.
Kinning
Comentado en Alemania el 1 de enero de 2020
Der Frästisch ist eigentlich eine gute Idee, gerade für eine kleine Maschine, wie die Dremel. Für kleine Arbeiten hat er gerade die richtige Größe, die Anordnung der Bedienungselemente ist gut und sinnvoll. Mit ein bisschen Fingerspitzengefühl ist auch die Dremel relativ schnell und einfach an der Tisch angeschlossen. Also eine wirklich gute Idee, würde nicht leider ihre Ausführung den Wert Einsatzfähigkeit des Gerätes relativieren.Das beginnt mit dem Anbringen des Frästisches an einen Werktisch oder dergleichen. Man kann ihn nur anschrauben, was vorhandene oder herzustellende Bohrlöcher voraussetzt. Oder aber fest auf einem Hilfsbrett montieren, welches man seinerseits dann anklemmen kann. So bei mir. Das eigentlich Ärgerliche ist jedoch die fast überwiegende Ausführung des Frästisches aus Kunststoff. Für die Oberplatte, den Anschlag und natürlich die Schutzhaube mag das angehen, aber die Dremel selbst bleibt auch bei festestem Einspannen elastisch und beweglich gelagert. Schon geringer Druck am Fräskopf reicht aus, um die Maschine nachgeben zu lassen, was ein präzises und exaktes Bearbeiten von Werkstücken nahezu unmöglich macht. Und genau darauf kommt es ja in dieser Kathegorie „Kleinmaschinen“ doch eigentlich an. So hat sich mir der Nutzen dieses Gerätes bis heute leider nicht erschlossen, schade.
Sifo Dyas
Comentado en Canadá el 11 de marzo de 2016
Wonderful little gadget. I purchased some bits for a fraction of the price Dremel charges for routing bits (https://www.amazon.ca/gp/product/B00XIZCYPS). It's a shame the Dremel bits cost $40.00 for a 4 pack when someone else is selling a 10 pack of bits for $8.00.Rather than bolt it down to my already-overloaded workbench, I bolted it down to a cedar 4x4 post at 8" long, and then just secure it in my woodworkers vise (http://www.amazon.com/Jorgensen-40709-Woodworkers-Vise/dp/B0000223R3/). Now I have a secured, removable, small routing bench for $50 rather than having to drop $300 for a full routing table plus router.The only downside is that all routing bits MUST be 1/8" bits to accommodate the dremel itself, so I'd say buy a couple packs of the Juanshop bits I posted for when they wear down in case they aren't stocked in the future.
ilive4fun
Comentado en los Estados Unidos el 10 de abril de 2016
Fantastic table though I wish it were a bit sturdier. Regardless, it appears to do the job well enough. I just don't trust plastic, where metal should have been used instead. Just my opinion of course... Anyhow as far as the table goes, it's easy enough to operate, has simple, readable instructions in several common languages and may require a bit of reading and/or watching YouTube videos for those, less familiar with these types of miniaturized tools, or power tools in general. This is NO TOY! You can be seriously injured or worse if you do not follow proper safety procedures and use required safety gear. I.e: Safety Glasses, finger guards and make adjustments with the tool UNPLUGGED. The extra effort of being sure the tool is unplugged could save your eyes or a finger or two, so just do it. Thank me later. Lol!Overall this is a great addition to my tool kit for fine Precision work crafting soft metals, plastics and wood. Love this thing.The only real drawback is, mounting your Dremel tool in this decice takes a few minutes, and of course, that tool can not be used for any other purpose while mounted. So plan your project carefully and minimize the number of times you have to swap out Dremel tools and bits. Assuming you only have one Dremel tool, like myself... Good luck!
Bobcat
Comentado en Japón el 2 de mayo de 2015
プラスチックか、多分、樹脂製だと思います。製造国はMade IN Chainaとあります。小さくても立派な工作道具です。ルーターを取り付ける部分がこのタイプではルーター本体の先の丸いカバーを外してねじ込むだけの方法に変わりました。カバーは紛失しないように、くれぐれもご注意してください。ルーター本体がちょっとぶれるようでしたら、結束バンドでルーター本体の中央部分を固定すればよろしいでしょう。小さな趣味でやっていることでございますので、文句はありません。ありがたく使わせていただいております。ビットの種類やアクセサリーも豊富なのがDREMELの魅力です。アイデア次第で色んな工作に挑戦する意欲が沸いてきます。最初は廃材を利用して具合をみてください。慣れないうちは、ルーターテーブルの癖を利用すればきれいに仕上がります。貴重な道具になります。
Productos recomendados