No hay artículos en el carro
No hay artículos en el carroDa 5.2 vueltas de rueda de bloqueo para bloquear cuando se utilizan cilindros fuera borda BayStar. El kit incluye: (1) bomba BayStar Heim (HH4314-3) (1) cilindro BayStar (HC465H) (1) kit de tubos BayStar (HT4420H, 2 mangueras de 20 pies) (2) fluido de dirección hidráulico (HA5430) (1) (1) kit de relleno (HA4448)
idlinterests
Comentado en los Estados Unidos el 31 de agosto de 2024
Easy install, just was cramped behind the dash on my boat. Stripped the bronze nut to attach hose to steering wheel back and was easy to replace nut from hardware store. The stainless fitting on their equipment was undamaged.
John Quevillon
Comentado en Canadá el 31 de julio de 2023
Easy to install.. works aswome on on my 75HP.
LB
Comentado en los Estados Unidos el 15 de agosto de 2021
Finally upgraded from cable steering and well worth the price difference. No more greasing cable to keep it moving. I will note to double check hose connections as I installed it backwards. Easy fix but just had addition work and bleeding. Another thing to consider is that if you have an Edson steering wheel the center nut may not be same size and you will need to buy correct size (5/8) which isn't cheap. Overall the install isn't difficult and there's a lot of videos to help where the provided instructions fall short or I feel aren't complete. Steering is very smooth and consistent pressure without the grease getting everywhere that I had with cable. So far it's great and will update any changes over time.
Dlchow
Comentado en Canadá el 19 de marzo de 2020
Just bought the baystar kit for my 2007 Yamaha 115 to replace the cable steering. Install and bleeding was really easy if you follow their instructions. Ive been out a couple times since I installed it and hydraulic steering with the baystar is the way to go!! Would recommend this unit to anyone struggling with cable steering. I link my 115 to a 9.9 when trolling for salmon and I don't notice the extra weight of the kicker at all.
Patricia López
Comentado en México el 11 de octubre de 2018
Recomendado al 100
Gonz
Comentado en los Estados Unidos el 20 de julio de 2017
This kit had everything I needed and the instructions it came with plus looking at some youtube videos from people made easy to install. It's definitely a two person job to bleed the air out.The neck of the steering wheel is probably good 4 inches so it was sticking out a lot for my helm so I bought a bracket adapter that enables you to mount the neck coming out from inside the helm instead of going on top of the helm and that made it shorter like by an inch and a half (that's the square thing at the bottom of the neck in my picture), still sticks out some but not as much and it only bothers me when I'm standing steering the boat.I definitely noticed the change from going from cable steering and I don't get any feedback and it doesn't get as hard to steer when going fast as the cable one used to do, I have a 17ft Key West 1720 boat with a 90HP engine, I had to cut the old cable steering cable out of the engine since in this boat model you have to unmount the engine to get it out since the motor end of the cable steering is solid metal that doesn't bend at all and there is no room to pull it out straight.Overall very happy with it, one recommendation I have is download the PDF of the install and print the mounting holes diagram to check in your boat's helm, my friend found out he had too many holes from the old steering and there was no good fiberglass spots left and he had to fix the whole area first before mounting the new hydraulic steering.
Productos recomendados
Mex $399.10
Mex $ 183 .00 Mex $183.00
Mex $379.00
Mex $ 185 .00 Mex $185.00
Mex $660.00
Mex $ 330 .00 Mex $330.00
Mex $205.48
Mex $ 113 .00 Mex $113.00
Mex $2,644.21
Mex $ 1,137 .00 Mex $1,137.00