No hay artículos en el carro
No hay artículos en el carroDescripción del producto
CARACTERÍSTICA
Disyuntor de reinicio manual
Adecuado para sistemas de 12-48 V CC. El botón se abre automáticamente para romper el circuito durante la sobrecarga; simplemente presiona para restablecer.
Diseño resistente al agua
Diseñado con materiales avanzados resistentes al agua y al calor para una mayor seguridad. Incluye dos cubiertas antipolvo de goma para mayor protección contra la humedad, por lo que es ideal para compartimentos del motor y otros entornos desafiantes.
Materiales de primera calidad
Hecho de materiales de aleación para una excelente conductividad y resistencia al frío, calor, salpicaduras y polvo. Cuenta con tacos de 6 mm compatibles con lengüetas de alambre 6AWG-1/4.
Incluye tacos de alambre y tornillos hexagonales
Cada interruptor viene con 2 lengüetas de alambre, 4 arandelas de cobre y 2 tornillos hexagonales, lo que hace que la instalación sea más rápida y eficiente y rentable.
TyGa
Comentado en Canadá el 12 de febrero de 2025
Everything you need for a high amperage breaker to include aftermarket items in your battery box. Can confirm the switch is reliable to trip and east to reset without issue. There isn’t much for weather protection on the connectors so some dielectric is recommended.Arrives quickly and well packaged. Can recommend for personal and professional shop use.
RF_Hz
Comentado en Canadá el 12 de enero de 2025
BULVACK 300 Amp Circuit Breaker Review.This circuit breaker is an interrupt/kill switch between an 11,000 lb capacity winch and a vehicle battery on an older Jeep TJ. The winch is hardwired to the vehicle battery. Over time, the winch would slowly drain the battery to the point where the Jeep would not start. While a 300 amp circuit breaker is likely overkill, it solved the issue.When the winch is not used, pushing a button on the circuit breaker breaks the circuit and prevents battery voltage drain. A red reset arm pops out when the button is pressed to indicate the circuit is broken. When the winch is needed, pushing in the red reset arm allows the current to flow to the winch.The included wire lugs accommodate 6 AWG wires, but the battery wiring in the Jeep and the winch required 4 AWG lugs. I like that the fastening points for the wire lugs have weatherproof caps that should prevent corrosion from forming. A small amount of dielectric grease helps, too.Waterproof is printed on the circuit breaker housing, and waterproof housing is mentioned in the product description. This device can be used for marine applications, but I could not find an ingress protection rating (IP).Overall, this product functioned as intended! Recommended!
Customer
Comentado en Canadá el 5 de abril de 2025
Good quality working like it should
Bob Harvey
Comentado en los Estados Unidos el 4 de abril de 2025
A very great breaker
Ron
Comentado en los Estados Unidos el 13 de diciembre de 2024
This 100 Amp circuit breakeris a must-have for anyone looking to protect their electrical system with reliability and ease. Whether you're working on a boat, RV, or any high-power setup, this circuit breaker offers excellent protection against overcurrent, ensuring your system stays safe from potential damage.One of the standout features of this circuit breaker is its manual reset function. Unlike many automatic breakers, the manual reset gives you full control over when to reset the breaker after it trips, ensuring you can assess and address any issues before power is restored. This extra layer of control is invaluable for both safety and peace of mind, particularly in situations where you may need to troubleshoot before restoring power.Durability is another key benefit. The waterproof design ensures that the BULVACK circuit breaker performs in even the harshest conditions. Whether you’re dealing with rain, splashes, or exposure to humidity, this breaker stands strong, making it perfect for marine environments, outdoor vehicles, or any application where water resistance is crucial. Its weatherproof casing keeps it safe from the elements, providing years of reliable service.Installation is straightforward, thanks to its inline fuse setup. Simply wire it into your system, and you’re ready to go. The breaker is designed to handle up to 100 amps, which is ideal for most heavy-duty applications. It offers a strong, stable connection and prevents excessive current from damaging your wiring or electronics.Another great thing about the BULVACK circuit breaker is its versatility. It’s compatible with a variety of applications, including automotive, solar power systems, and boats. Whether you’re outfitting a car audio system or installing a solar panel setup, this circuit breaker has you covered.In conclusion, the BULVACK 100 Amp Circuit Breaker offers a solid combination of safety, durability, and convenience. With its manual reset, waterproof design, and easy installation, it’s a top choice for anyone looking to safeguard their electrical systems. If you want peace of mind knowing your high-power systems are protected, this circuit breaker is a smart investment.
Productos recomendados
Mex $1,303.00
Mex $ 612 .00 Mex $612.00
Mex $474.53
Mex $ 251 .00 Mex $251.00
Mex $493.80
Mex $ 246 .00 Mex $246.00
Mex $232.00
Mex $ 132 .00 Mex $132.00