No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Entrada: CA 110 V ± 10 %50/60 Hz. Tamaño: 52 mm. Potencia: Eje refrigerado por aire de 500 W. Corriente: 4 A. Voltaje de funcionamiento: 100 V CC. Longitud del motor: 200 mm. Par máximo: 5000 G/CM de alta precisión del husillo 0,01 – 0,03 Velocidad: Hasta 12.000 revoluciones / min
Material de alta calidad y resistente al calor. Pequeña fracción, alta velocidad de funcionamiento y silencioso. Tamaño pequeño, fácil de instalar y quitar.
Equipado con un ventilador refrigeraton en la parte trasera del motor. Se puede utilizar para grabar y perforar madera maciza, PCB, tornos, molinos, bombas y transportadores, etc.
Entorno de trabajo
Por favor, instale en el lugar que está corriendo de aire. Temperatura del aire: -10 ~ 40 °C. Humedad relativa del aire: ≤ 85 %. Impacto bien ventilado y no violento.
El paquete contiene:
1 motor de eje refrigerado por aire de 500 W, 1 abrazadera de eje de 52 mm (4 tornillos), 1 regulador de velocidad de 110 V con mach3 13 portabrocas ER11, 10 cuchillos de fondo plano, 1 cable de alimentación
Riripredusol
Comentado en Francia el 29 de enero de 2025
No se pudo cargar el contenido.
Les
Comentado en Canadá el 19 de enero de 2025
I recently purchased the Daedalus CNC Spindle Motor Kit, 500W to upgrade my Genmitsu 4040 Reno, and I’m thoroughly impressed with the results. Here's my experience:InstallationWiring up the spindle was incredibly easy. The kit comes with clear instructions, and everything fit seamlessly with my existing setup. Even for someone with minimal electrical experience, the installation process was straightforward and stress-free.PerformanceThe performance improvement over the original spindle is remarkable. The extra speed and power provided by the 500W motor have enabled me to:Use a much wider selection of bits.Cut through tougher materials with ease.Achieve smoother finishes on projects.EfficiencyOne of the most noticeable benefits is the time saved on projects. With the increased power, I’m able to complete jobs significantly faster without compromising on precision or quality. This upgrade has genuinely transformed the efficiency of my workflow.Important ConsiderationKeep in mind that you will need a relay to control the spindle within the software. Without it, you must manually turn the spindle on and off using the speed control dial, which can be less convenient during operation.Overall ImpressionThe Daedalus CNC Spindle Motor Kit is a fantastic upgrade for anyone looking to boost the capabilities of their CNC machine. The combination of easy installation, enhanced performance, and improved efficiency makes it well worth the investment.If you’re considering an upgrade for your Genmitsu 4040 Reno or any other compatible CNC, I highly recommend this spindle kit. It’s a game-changer!
giovanna
Comentado en Italia el 13 de octubre de 2024
No se pudo cargar el contenido.
Kevin B.
Comentado en los Estados Unidos el 8 de julio de 2023
Excellent and quieter than the original spindle/router motor.I specifically got this as I haven't yet figured out mach3 and/or linuxcnc and wanted to ensure I had control over the motor.The previous motor sheared the main shaft and also the controller was getting too hot and going into safety.This one is as described. And the collets appear to work. I only used the 1/8" so far.Took about a half hour to go through everything.You will need to provide a power wire from mains to this. I cut the end off a pc power cable
Nelson
Comentado en México el 14 de junio de 2023
Llego muy rapido, totalmente satisfecho vino de regalo Un collet extra (12 total) y Unas pinzas las cuales no decia qué llevaba, lo acabo de probar y Todo a la perfection la recomiendo.
juan c.
Comentado en España el 10 de octubre de 2022
Es potente y resistente
Productos recomendados
Mex $1,739.61
Mex $ 748 .00 Mex $748.00
Mini Motor de Torno, 550W, 6000RPM, Mini Motor de Alta Dureza, Motor Generador DIY para CJ18A (110V)
Mex $1,629.00
Mex $ 798 .00 Mex $798.00