Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

CURT Manufacturing Carretilla de carga con forma de bandeja Curt 18110

Envío gratis en pedidos superiores a Mex $600.00

Mex $2,932.17

Mex $ 1,436 .00 Mex $1,436.00

En stock

Acerca de este artículo

  • Libera espacio dentro del vehículo para pasajeros y carga
  • Caña angulada que eleva el portador para una mayor distancia al suelo
  • La manga del adaptador permite el montaje en un tubo receptor de 3.17 cm o 5.08 cm
  • El diseño de dos piezas se atornilla fácilmente para un montaje rápido
  • Base de malla para facilitar su limpieza



Más información del producto

CURT - Transportador de carga estilo bandeja

Dondequiera que tu trabajo o juego te lleve

CURT ofrece enganches de remolque personalizados, productos eléctricos y una línea completa de accesorios de remolque para llevarte allí con confianza y disfrutar de cada milla del viaje.

CURT - Portabrocas estilo bandeja

Almacenamiento adicional. Montaje en enganche.

Los transportadores de carga de estilo bandeja CURT hacen que empacar esos artículos adicionales sea simple, usando tu enganche de remolque El transportín de carga se monta fácilmente en el tubo receptor cuando sea necesario y proporciona un espacio de almacenamiento conveniente en el exterior del vehículo, lo que permite más espacio en el interior para usted y su tripulación.

Los soportes de carga tipo bandeja también son una excelente manera de mantener la suciedad y otros desorden fuera de tu vehículo. Son ideales para transportar un trofeo de ciervos, leña, equipo o herramientas barro, equipo de camping húmedo y mucho más

Características clave

  • Tamaños de vástago de 1 1/4 pulgadas o 2 pulgadas
  • Capacidad de peso de hasta 300 o 500 libras.
  • Agujeros de montaje para una bolsa de carga o red
  • Diseño de dos piezas para un fácil montaje
  • Base de malla para una fácil limpieza de desechos

Ventajas de los transportistas de carga estilo bandeja CURT

Paredes bajas con agujeros

Las paredes de estilo bandeja mantienen los artículos seguros mientras que permiten que la carga más voluminosa se sale. También cuentan con agujeros para fijar una red de carga o correas.

Vástago plegable

Algunos modelos de la bandeja de carga CURT tienen un vástago plegable que permite que el soporte se doble cómodamente cuando no esté en uso.

Base de malla resistente

La parte inferior de malla de acero y el diseño atornillado proporcionan una plataforma fuerte para la carga y hacen que la limpieza de desechos y derrames sea rápida y fácil.

Vástago en

Algunos modelos del portaequipaje de carga estilo bandeja vienen con un vástago en ángulo para proporcionar una distancia adicional al suelo en vehículos especialmente bajos.

Ventajas de las bolsas de carga CURT

Compatible con portaequipaje de carga

Las bolsas de carga CURT proporcionan seguridad adicional para tus artículos y protección contra los elementos. Están disponibles en varios tamaños para adaptarse a los soportes de carga tipo bandeja Curt, estilo cesta y portaequipajes de techo.

Construcción impermeable

Cada bolsa de carga está hecha de vinilo 500 denier, resistente a los rayos UV y tiene costuras soldadas para ser realmente impermeable. El cierre de cremallera también cuenta con una solapa de velcro para mantener el interior seco.

Correas de amarre integradas

Las bolsas de carga CURT están construidas con una serie de correas con extremos de bucle para asegurar la bolsa al portador de carga. Estas correas también se pueden ajustar para adaptarse a lo que esté almacenado en el interior.

Almacenamiento práctico

Las bolsas de carga CURT no solo proporcionan una forma segura de proteger tu carga, sino que también son fáciles de almacenar. Cuando no está en uso, la bolsa de vinilo se puede plegar para un almacenamiento compacto.


Greg A.
Comentado en los Estados Unidos el 19 de julio de 2024
Excellent little rack was just what we needed. Drove about 700 miles with 2 fully loaded coolers - about 75 to 100 lbs total. Absolutely no issues. Rack extends far enough out that it was easy to access the back of the vehicle for loading/unloading. But it does not extend out too far - so parking in parking lots was not an issue either. It was solid and stable.Not many racks exist for 1.25" trailer hitches. Glad we purchased this one.There are comments from other reviewers that this was difficult to put together and/or that the instructions needed to be modified. I followed the instructions "as is" and it went together just fine, and it didn't take long.
Multimarcas MiCo
Comentado en México el 10 de mayo de 2024
Se pandea un poco con mucho peso
bruno ghersi
Comentado en los Estados Unidos el 20 de noviembre de 2024
Got this to increase space to carry camping gear and others. was very easy to assemble and install. I did have to go get some reflective tape (as others have mentioned) but it was an easy fix.
Abrahm P
Comentado en México el 24 de abril de 2024
Excelente , mucho más espacio disponible en el interior del vehículo
Scott Walters
Comentado en los Estados Unidos el 8 de septiembre de 2023
I have a 1.25 inch receiver on my Nissan LEAF, so options were somewhat limited. This was a good choice. Easy to assemble, reasonably solid, and easy to attach/detach. Used it on a 90 minute drive out and then back, with a fairly heavy cooler and two hard side suitcases attached. Worked exactly as expected, and we were able to get four adults and all their stuff for a 3 night houseboat trip loaded into a LEAF. That's saying something.You will want to be sure to keep the load even side to side. When I started reloading for our trip home, I put the cooler on first at an extreme end, and it listed a few inches to starboard. Re-centering the load solved the issue. I think we had around 100 lbs on the rack, and it performed just fine. Would definitely buy again.
Melissa
Comentado en los Estados Unidos el 25 de noviembre de 2019
This cargo carrier is a great buy. I bought it to carry a gas can, cooler, and miscellaneous tools or other luggage in a Rubbermaid tote on roadtrips. It has held on great so far, but it does have a few cons I'll cover soon. The rack did, as for many people, arrive slightly damaged. The Curt box it arrived in had a hole in the back about 2" in diameter. The metal mesh on one half of the rack, packaged on the bottom, was bent a bit. It is completely usable, but a disappointment. The rack was fairly straight forward to assemble. It did take a bit of flipping back and forth and holding parts carefully to get all the bolts started, but it is completely do-able for anyone with a 17mm wrench. It does require a 19mm for the odd, yet simply workable hitch pin. Once the basket was together, following advice from other Amazon reviews with all bolts turned with the shaft out and some added reflective stickers for extra visibility, I put it on my car (2015 Honda Fit EX) and it went on easily. The hitch pin, a long bolt you have to tighten to 'wedge' it so it can't rattle, works fine and gives no side to side flop or shake. I also grabbed a $10 hitch tightener to help strengthen things a bit, but I'm not sure it was necessary. It also uses 19mm hardware so I just keep it and use it since I have it. The cargo carrier basket is pretty sturdy and definitely stout enough for what I carry. My hitch is only rated for 200 lbs. tongue weight, which I've not come close to, but I'm not sure I'd go much further than that even if it could. I don't think the carrier could hold the 300 lbs. that it claims, but it definitely holds up as well as I hoped a sub-$100 1-3/4" cargo carrier could. The angled 'shank' does help my height challenged car clear the driveway, and does angle the basket slightly towards the car, but only a couple of degrees at most. If I could offer one suggestion to Curt, it'd be to add some reflective sticker and maybe to package it with some thick cardboard to help protect the mesh floor of the basket. Otherwise, all seems great, and I definitely have no qualms recommending anyone who needs to buy this.Update:It's been a week, it's been about 1,500 miles, and it's been A-OK! Still holding up well, no rattling or annoying flopping. I've only hauled about 50lbs total, if that, at a time on it for those miles, but the rack is still sturdy, and continues to be a good buy.
Daniel
Comentado en México el 11 de marzo de 2018
Todo excelente la esperaba en 10 días y llegó en 3, el mterial de este producto es muy bueno tal y como lo describen, estoy muy satisfecho con la compra
Mich
Comentado en los Estados Unidos el 15 de diciembre de 2018
I ordered this one because I have a Chevy HHR, and that only has a tongue weight capacity of 200 lbs, and 1000 lbs. total towing capacity, and this one fit the bill with being a class 1, but also being very light, and still having excellent strength and durability. We also chose this one because it had a bit of a rise on it from the hitch. That was important because my car is already a little on the low side (stock from factory that way) and also because of where the tail pipe is. I would recommend bolting some lightweight metal plate to the front and underneath by the tail pipe, as we did, so as to keep the exhaust heat from burning/melting the cargo. We had a vinyl covered tote, and that worked perfectly for us. The plate got very hot, but the tote only got a little warm. Other than that, it's perfect. We had put a very large, heavy duty, rubbermaid plastic tote on it, that fit almost the entire base of this tray completely, which we put inside a heavy duty vinyl cargo tote case (to give the case a frame and stability), and it worked beautifully, and it was very loaded. We took it from S. Florida all the way into the N.W. mountains of Georgia and back for Thanksgiving, through torrential rainstorms and lots of bumpy, pot-holed, bad mountain roads, and it worked perfectly and was very stable. It was also pretty simple to put together and bolt on. I would definitely recommend this hitch tray.
Productos recomendados

Mex $1,685.00

Mex $ 724 .00 Mex $724.00

5.0
Elegir