Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

Creality Capricorn Bowden Tubing 1.75 mm 1M All Metal Ender 3 V2 extrusor Acopladores neumáticos muelles de nivel de cama para impresora 3D Ender 3/Ender 3 V2/Ender 3 Pro/Ender 5 Pro

Envío gratis en pedidos superiores a Mex $600.00

Mex $401.53

Mex $ 192 .00 Mex $192.00

En stock

1.Nombredelestilo:Extrusor Con Tubo Capricornio


Acerca de este artículo

  • 1 alimentador de filamento extrusor de creatividad mejorado de 1,75 mm para la mayoría de impresoras 3D Creality en el mercado. Hace que cargar el filamento sea más fácil y suave, no te preocupes por que el filamento se raspe o se rompa.
  • 1 tubo de PTFE Capricornio original de 1 metro con la fricción más baja del mercado. Menos fricción significa más capacidad de respuesta, menos retracción, impresiones más precisas, menos deslizamiento, desgaste y desgarro en el extrusor, y menos obstrucción al imprimir filamentos gruesos como algunos rellenos de madera o rellenos de hierro.
  • 1 par de acopladores neumáticos pequeños y grandes para asegurar el tubo Bowden en extrusora y hotend.
  • 4 muelles a nivel de cama para una nivelación rígida y precisa. Nota: los muelles miden alrededor de 25 mm de largo, que es más largo que los resortes Creality ender 3, Creality ender 3 Pro y Creality ender 3 v2. Puedes utilizar una herramienta para cortarlo para que sea más corto si realmente te gusta este producto o ajustar la cama caliente para que sea más alta para adaptarse a los resortes.
  • Nota: algunos modelos de impresora como Ender 3 y Edner 3 Pro, sus engranajes de extrusión originales no se pueden quitar, por lo que estos modelos de impresoras no tienen que cambiar el tornillo de extrusión. Ender 3V2, su engranaje de extrusión se puede reemplazar.



Descripción del producto

1-1

Accesorios para impresora 3D Creality con tubo de PTFE Capricorn Bowden de 1,75 mm, extrusor de metal, acopladores neumáticos, resorte a nivel de cama para impresora 3D Ender 3/Ender 3 V2/Ender 3 Pro

2-1

Extrusora Creality All Metal MK-8 mejorada

Material: aleación de aluminio

Color gris

Engranaje impulsor: 40 dientes

2-2

Resortes de cama caliente premium de 4 piezas

4 resortes a nivel de la cama para una nivelación de la cama rígida y precisa

2-3

Tubo de PTFE Bowden Capricornio original de 1 metro

Menos fricción, menos retracción, impresiones más precisas, menos deslizamiento, desgaste y roturas en la extrusora, y menos obstrucciones al imprimir filamentos gruesos, como relleno de madera o relleno de hierro.

3-1

Tubo de resistencia a altas temperaturas

3-2

PTEF más duradero que el tubo original blanco

3-3

El paquete incluye

4

1 tubo Bowden Capricorn Premium XS de 1 m.

1 kit de alimentación de accionamiento de extrusora MK8 gris

4 muelles a nivel de la cama.

1 par de acopladores neumáticos pequeños y grandes

Capricorn Premium XS Bowden Tubing

Aditivos Blue Color y Secret Mezcla aditiva de alta lubricidad
Color: Azul Oscuro
Diámetro interior (mm) 1,90 +/- 0,05
Diámetro exterior (mm) 3.95 +/- 0.05
Material: PTFE virgen puro de la más alta calidad
Punto de fusión hasta 340° C

Jürgen
Comentado en Alemania el 15 de marzo de 2025
Ender 3 Pro:Einwandfreie Passgenauigkeit und einfach gegen das original Kunststoffteil auszutauschen. Sollten Schrauben verloren gehen, kann man die vom original Teil verwenden. Auch die Feder ist identisch.Also eigendilch das Originalteil nur in Aluminium.
Jürgen
Comentado en Alemania el 15 de marzo de 2025
Ender 3 Pro:Einwandfreie Passgenauigkeit und einfach gegen das original Kunststoffteil auszutauschen. Sollten Schrauben verloren gehen, kann man die vom original Teil verwenden. Auch die Feder ist identisch.Also eigendilch das Originalteil nur in Aluminium.
Jürgen
Comentado en Alemania el 15 de marzo de 2025
Ender 3 Pro:Einwandfreie Passgenauigkeit und einfach gegen das original Kunststoffteil auszutauschen. Sollten Schrauben verloren gehen, kann man die vom original Teil verwenden. Auch die Feder ist identisch.Also eigendilch das Originalteil nur in Aluminium.
Jürgen
Comentado en Alemania el 15 de marzo de 2025
Ender 3 Pro:Einwandfreie Passgenauigkeit und einfach gegen das original Kunststoffteil auszutauschen. Sollten Schrauben verloren gehen, kann man die vom original Teil verwenden. Auch die Feder ist identisch.Also eigendilch das Originalteil nur in Aluminium.
Jürgen
Comentado en Alemania el 15 de marzo de 2025
Ender 3 Pro:Einwandfreie Passgenauigkeit und einfach gegen das original Kunststoffteil auszutauschen. Sollten Schrauben verloren gehen, kann man die vom original Teil verwenden. Auch die Feder ist identisch.Also eigendilch das Originalteil nur in Aluminium.
Jürgen
Comentado en Alemania el 15 de marzo de 2025
Ender 3 Pro:Einwandfreie Passgenauigkeit und einfach gegen das original Kunststoffteil auszutauschen. Sollten Schrauben verloren gehen, kann man die vom original Teil verwenden. Auch die Feder ist identisch.Also eigendilch das Originalteil nur in Aluminium.
Jürgen
Comentado en Alemania el 15 de marzo de 2025
Ender 3 Pro:Einwandfreie Passgenauigkeit und einfach gegen das original Kunststoffteil auszutauschen. Sollten Schrauben verloren gehen, kann man die vom original Teil verwenden. Auch die Feder ist identisch.Also eigendilch das Originalteil nur in Aluminium.
Jürgen
Comentado en Alemania el 15 de marzo de 2025
Ender 3 Pro:Einwandfreie Passgenauigkeit und einfach gegen das original Kunststoffteil auszutauschen. Sollten Schrauben verloren gehen, kann man die vom original Teil verwenden. Auch die Feder ist identisch.Also eigendilch das Originalteil nur in Aluminium.
Luca
Comentado en Italia el 3 de febrero de 2025
Preso per sostituire l'originale in plastica. Funziona assolutamente molto meglio dell'originale in plastica. Si monta in 5 minuti e fa una gran differenza su come il filo viene spinto. Mod consigliata.
Luca
Comentado en Italia el 3 de febrero de 2025
Preso per sostituire l'originale in plastica. Funziona assolutamente molto meglio dell'originale in plastica. Si monta in 5 minuti e fa una gran differenza su come il filo viene spinto. Mod consigliata.
Luca
Comentado en Italia el 3 de febrero de 2025
Preso per sostituire l'originale in plastica. Funziona assolutamente molto meglio dell'originale in plastica. Si monta in 5 minuti e fa una gran differenza su come il filo viene spinto. Mod consigliata.
Luca
Comentado en Italia el 3 de febrero de 2025
Preso per sostituire l'originale in plastica. Funziona assolutamente molto meglio dell'originale in plastica. Si monta in 5 minuti e fa una gran differenza su come il filo viene spinto. Mod consigliata.
Luca
Comentado en Italia el 3 de febrero de 2025
Preso per sostituire l'originale in plastica. Funziona assolutamente molto meglio dell'originale in plastica. Si monta in 5 minuti e fa una gran differenza su come il filo viene spinto. Mod consigliata.
Luca
Comentado en Italia el 3 de febrero de 2025
Preso per sostituire l'originale in plastica. Funziona assolutamente molto meglio dell'originale in plastica. Si monta in 5 minuti e fa una gran differenza su come il filo viene spinto. Mod consigliata.
Luca
Comentado en Italia el 3 de febrero de 2025
Preso per sostituire l'originale in plastica. Funziona assolutamente molto meglio dell'originale in plastica. Si monta in 5 minuti e fa una gran differenza su come il filo viene spinto. Mod consigliata.
Luca
Comentado en Italia el 3 de febrero de 2025
Preso per sostituire l'originale in plastica. Funziona assolutamente molto meglio dell'originale in plastica. Si monta in 5 minuti e fa una gran differenza su come il filo viene spinto. Mod consigliata.
carlos ruiz tapia
Comentado en México el 21 de septiembre de 2023
excelente tiempo de entrega, bien empaquetado, excelente calidad del producto
carlos ruiz tapia
Comentado en México el 21 de septiembre de 2023
excelente tiempo de entrega, bien empaquetado, excelente calidad del producto
carlos ruiz tapia
Comentado en México el 21 de septiembre de 2023
excelente tiempo de entrega, bien empaquetado, excelente calidad del producto
carlos ruiz tapia
Comentado en México el 21 de septiembre de 2023
excelente tiempo de entrega, bien empaquetado, excelente calidad del producto
carlos ruiz tapia
Comentado en México el 21 de septiembre de 2023
excelente tiempo de entrega, bien empaquetado, excelente calidad del producto
carlos ruiz tapia
Comentado en México el 21 de septiembre de 2023
excelente tiempo de entrega, bien empaquetado, excelente calidad del producto
carlos ruiz tapia
Comentado en México el 21 de septiembre de 2023
excelente tiempo de entrega, bien empaquetado, excelente calidad del producto
carlos ruiz tapia
Comentado en México el 21 de septiembre de 2023
excelente tiempo de entrega, bien empaquetado, excelente calidad del producto
David Aguirre
Comentado en México el 12 de abril de 2023
Excelente Upgrade para mejorar la calidad de impresión para la Ender 3 V2
David Aguirre
Comentado en México el 12 de abril de 2023
Excelente Upgrade para mejorar la calidad de impresión para la Ender 3 V2
David Aguirre
Comentado en México el 12 de abril de 2023
Excelente Upgrade para mejorar la calidad de impresión para la Ender 3 V2
David Aguirre
Comentado en México el 12 de abril de 2023
Excelente Upgrade para mejorar la calidad de impresión para la Ender 3 V2
David Aguirre
Comentado en México el 12 de abril de 2023
Excelente Upgrade para mejorar la calidad de impresión para la Ender 3 V2
David Aguirre
Comentado en México el 12 de abril de 2023
Excelente Upgrade para mejorar la calidad de impresión para la Ender 3 V2
David Aguirre
Comentado en México el 12 de abril de 2023
Excelente Upgrade para mejorar la calidad de impresión para la Ender 3 V2
David Aguirre
Comentado en México el 12 de abril de 2023
Excelente Upgrade para mejorar la calidad de impresión para la Ender 3 V2
ismael h.
Comentado en México el 9 de junio de 2022
Son de muy buena calidad, y mejoran las impresiones
ismael h.
Comentado en México el 9 de junio de 2022
Son de muy buena calidad, y mejoran las impresiones
ismael h.
Comentado en México el 9 de junio de 2022
Son de muy buena calidad, y mejoran las impresiones
ismael h.
Comentado en México el 9 de junio de 2022
Son de muy buena calidad, y mejoran las impresiones
ismael h.
Comentado en México el 9 de junio de 2022
Son de muy buena calidad, y mejoran las impresiones
ismael h.
Comentado en México el 9 de junio de 2022
Son de muy buena calidad, y mejoran las impresiones
ismael h.
Comentado en México el 9 de junio de 2022
Son de muy buena calidad, y mejoran las impresiones
ismael h.
Comentado en México el 9 de junio de 2022
Son de muy buena calidad, y mejoran las impresiones
J. Donoso
Comentado en México el 2 de marzo de 2022
Extrusora de aluminio, resistente y muy fácil de instalar. Ahora mi impresora imprime mejor que cuando la compré. Muy recomendada esta actualización
J. Donoso
Comentado en México el 2 de marzo de 2022
Extrusora de aluminio, resistente y muy fácil de instalar. Ahora mi impresora imprime mejor que cuando la compré. Muy recomendada esta actualización
J. Donoso
Comentado en México el 2 de marzo de 2022
Extrusora de aluminio, resistente y muy fácil de instalar. Ahora mi impresora imprime mejor que cuando la compré. Muy recomendada esta actualización
J. Donoso
Comentado en México el 2 de marzo de 2022
Extrusora de aluminio, resistente y muy fácil de instalar. Ahora mi impresora imprime mejor que cuando la compré. Muy recomendada esta actualización
J. Donoso
Comentado en México el 2 de marzo de 2022
Extrusora de aluminio, resistente y muy fácil de instalar. Ahora mi impresora imprime mejor que cuando la compré. Muy recomendada esta actualización
J. Donoso
Comentado en México el 2 de marzo de 2022
Extrusora de aluminio, resistente y muy fácil de instalar. Ahora mi impresora imprime mejor que cuando la compré. Muy recomendada esta actualización
J. Donoso
Comentado en México el 2 de marzo de 2022
Extrusora de aluminio, resistente y muy fácil de instalar. Ahora mi impresora imprime mejor que cuando la compré. Muy recomendada esta actualización
J. Donoso
Comentado en México el 2 de marzo de 2022
Extrusora de aluminio, resistente y muy fácil de instalar. Ahora mi impresora imprime mejor que cuando la compré. Muy recomendada esta actualización
Javi Roo
Comentado en México el 10 de marzo de 2022
Es indispensable tener un kit de estos por cualquier detalle que le vayan surgiendo a tus máquinas, piezas de buena calidad que te sacan del apuro compatibles con ender 3 y ender 3 pro, buen servicio llegaron antes y hasta la fecha siguen funcionando... 100% recomendable.
Javi Roo
Comentado en México el 10 de marzo de 2022
Es indispensable tener un kit de estos por cualquier detalle que le vayan surgiendo a tus máquinas, piezas de buena calidad que te sacan del apuro compatibles con ender 3 y ender 3 pro, buen servicio llegaron antes y hasta la fecha siguen funcionando... 100% recomendable.
Javi Roo
Comentado en México el 10 de marzo de 2022
Es indispensable tener un kit de estos por cualquier detalle que le vayan surgiendo a tus máquinas, piezas de buena calidad que te sacan del apuro compatibles con ender 3 y ender 3 pro, buen servicio llegaron antes y hasta la fecha siguen funcionando... 100% recomendable.
Javi Roo
Comentado en México el 10 de marzo de 2022
Es indispensable tener un kit de estos por cualquier detalle que le vayan surgiendo a tus máquinas, piezas de buena calidad que te sacan del apuro compatibles con ender 3 y ender 3 pro, buen servicio llegaron antes y hasta la fecha siguen funcionando... 100% recomendable.
Javi Roo
Comentado en México el 10 de marzo de 2022
Es indispensable tener un kit de estos por cualquier detalle que le vayan surgiendo a tus máquinas, piezas de buena calidad que te sacan del apuro compatibles con ender 3 y ender 3 pro, buen servicio llegaron antes y hasta la fecha siguen funcionando... 100% recomendable.
Javi Roo
Comentado en México el 10 de marzo de 2022
Es indispensable tener un kit de estos por cualquier detalle que le vayan surgiendo a tus máquinas, piezas de buena calidad que te sacan del apuro compatibles con ender 3 y ender 3 pro, buen servicio llegaron antes y hasta la fecha siguen funcionando... 100% recomendable.
Javi Roo
Comentado en México el 10 de marzo de 2022
Es indispensable tener un kit de estos por cualquier detalle que le vayan surgiendo a tus máquinas, piezas de buena calidad que te sacan del apuro compatibles con ender 3 y ender 3 pro, buen servicio llegaron antes y hasta la fecha siguen funcionando... 100% recomendable.
Javi Roo
Comentado en México el 10 de marzo de 2022
Es indispensable tener un kit de estos por cualquier detalle que le vayan surgiendo a tus máquinas, piezas de buena calidad que te sacan del apuro compatibles con ender 3 y ender 3 pro, buen servicio llegaron antes y hasta la fecha siguen funcionando... 100% recomendable.
Benito Hernandez
Comentado en México el 18 de febrero de 2022
llevo 5 meses con una Ender 5 plus y le cambie el extrusor plástico por este de metal, me a trabajado excelente además de traer los resortes para la cama caliente y el tubing, vendedor recomendable, compre otros artículos con el y me brindo soporte continuo cuando lo requerí, muy recomendable
Benito Hernandez
Comentado en México el 18 de febrero de 2022
llevo 5 meses con una Ender 5 plus y le cambie el extrusor plástico por este de metal, me a trabajado excelente además de traer los resortes para la cama caliente y el tubing, vendedor recomendable, compre otros artículos con el y me brindo soporte continuo cuando lo requerí, muy recomendable
Benito Hernandez
Comentado en México el 18 de febrero de 2022
llevo 5 meses con una Ender 5 plus y le cambie el extrusor plástico por este de metal, me a trabajado excelente además de traer los resortes para la cama caliente y el tubing, vendedor recomendable, compre otros artículos con el y me brindo soporte continuo cuando lo requerí, muy recomendable
Benito Hernandez
Comentado en México el 18 de febrero de 2022
llevo 5 meses con una Ender 5 plus y le cambie el extrusor plástico por este de metal, me a trabajado excelente además de traer los resortes para la cama caliente y el tubing, vendedor recomendable, compre otros artículos con el y me brindo soporte continuo cuando lo requerí, muy recomendable
Benito Hernandez
Comentado en México el 18 de febrero de 2022
llevo 5 meses con una Ender 5 plus y le cambie el extrusor plástico por este de metal, me a trabajado excelente además de traer los resortes para la cama caliente y el tubing, vendedor recomendable, compre otros artículos con el y me brindo soporte continuo cuando lo requerí, muy recomendable
Benito Hernandez
Comentado en México el 18 de febrero de 2022
llevo 5 meses con una Ender 5 plus y le cambie el extrusor plástico por este de metal, me a trabajado excelente además de traer los resortes para la cama caliente y el tubing, vendedor recomendable, compre otros artículos con el y me brindo soporte continuo cuando lo requerí, muy recomendable
Benito Hernandez
Comentado en México el 18 de febrero de 2022
llevo 5 meses con una Ender 5 plus y le cambie el extrusor plástico por este de metal, me a trabajado excelente además de traer los resortes para la cama caliente y el tubing, vendedor recomendable, compre otros artículos con el y me brindo soporte continuo cuando lo requerí, muy recomendable
Benito Hernandez
Comentado en México el 18 de febrero de 2022
llevo 5 meses con una Ender 5 plus y le cambie el extrusor plástico por este de metal, me a trabajado excelente además de traer los resortes para la cama caliente y el tubing, vendedor recomendable, compre otros artículos con el y me brindo soporte continuo cuando lo requerí, muy recomendable
Miguel Ángel ballesteros González
Comentado en México el 14 de octubre de 2022
es compatible con la voxelab queda perfecto solo tienen que tener cuidado con las roscas si se pasan romperán la rosca
Miguel Ángel ballesteros González
Comentado en México el 14 de octubre de 2022
es compatible con la voxelab queda perfecto solo tienen que tener cuidado con las roscas si se pasan romperán la rosca
Miguel Ángel ballesteros González
Comentado en México el 14 de octubre de 2022
es compatible con la voxelab queda perfecto solo tienen que tener cuidado con las roscas si se pasan romperán la rosca
Miguel Ángel ballesteros González
Comentado en México el 14 de octubre de 2022
es compatible con la voxelab queda perfecto solo tienen que tener cuidado con las roscas si se pasan romperán la rosca
Miguel Ángel ballesteros González
Comentado en México el 14 de octubre de 2022
es compatible con la voxelab queda perfecto solo tienen que tener cuidado con las roscas si se pasan romperán la rosca
Miguel Ángel ballesteros González
Comentado en México el 14 de octubre de 2022
es compatible con la voxelab queda perfecto solo tienen que tener cuidado con las roscas si se pasan romperán la rosca
Miguel Ángel ballesteros González
Comentado en México el 14 de octubre de 2022
es compatible con la voxelab queda perfecto solo tienen que tener cuidado con las roscas si se pasan romperán la rosca
Miguel Ángel ballesteros González
Comentado en México el 14 de octubre de 2022
es compatible con la voxelab queda perfecto solo tienen que tener cuidado con las roscas si se pasan romperán la rosca
pranay
Comentado en India el 17 de abril de 2022
The ptfe tube is original from Capricorn PTFE. Excellent quality. Was worth the price
pranay
Comentado en India el 17 de abril de 2022
The ptfe tube is original from Capricorn PTFE. Excellent quality. Was worth the price
pranay
Comentado en India el 17 de abril de 2022
The ptfe tube is original from Capricorn PTFE. Excellent quality. Was worth the price
pranay
Comentado en India el 17 de abril de 2022
The ptfe tube is original from Capricorn PTFE. Excellent quality. Was worth the price
pranay
Comentado en India el 17 de abril de 2022
The ptfe tube is original from Capricorn PTFE. Excellent quality. Was worth the price
pranay
Comentado en India el 17 de abril de 2022
The ptfe tube is original from Capricorn PTFE. Excellent quality. Was worth the price
pranay
Comentado en India el 17 de abril de 2022
The ptfe tube is original from Capricorn PTFE. Excellent quality. Was worth the price
pranay
Comentado en India el 17 de abril de 2022
The ptfe tube is original from Capricorn PTFE. Excellent quality. Was worth the price
xgx
Comentado en Canadá el 30 de julio de 2021
You can expect the one that came with your ender 3 to break, they always seem to. This is much better quality and has been going strong.
xgx
Comentado en Canadá el 30 de julio de 2021
You can expect the one that came with your ender 3 to break, they always seem to. This is much better quality and has been going strong.
xgx
Comentado en Canadá el 30 de julio de 2021
You can expect the one that came with your ender 3 to break, they always seem to. This is much better quality and has been going strong.
xgx
Comentado en Canadá el 30 de julio de 2021
You can expect the one that came with your ender 3 to break, they always seem to. This is much better quality and has been going strong.
xgx
Comentado en Canadá el 30 de julio de 2021
You can expect the one that came with your ender 3 to break, they always seem to. This is much better quality and has been going strong.
xgx
Comentado en Canadá el 30 de julio de 2021
You can expect the one that came with your ender 3 to break, they always seem to. This is much better quality and has been going strong.
xgx
Comentado en Canadá el 30 de julio de 2021
You can expect the one that came with your ender 3 to break, they always seem to. This is much better quality and has been going strong.
xgx
Comentado en Canadá el 30 de julio de 2021
You can expect the one that came with your ender 3 to break, they always seem to. This is much better quality and has been going strong.
Nick
Comentado en los Estados Unidos el 16 de octubre de 2021
This is a great little kit, don't get me wrong - it is great value and adds some small nice improvements but some of the reviews are outright misleading.No, this won’t increase your print quality basically at allNor does it allow you to increase print speed in any way.The amount of factors that contribute to the end product of a print are many and tiny tweaks here and there can be either imperceptible or be the difference of printing a blob of ugly plastic spaghetti.Good calibration and tuning of your settings, steppers, flow rate, temps, retractions, leveling, and combing settings are going to have infinitely more of an impact on your print quality and speed than most physical upgrades and this product is no exception. If you want more out of your printer, look into those things first! Even if you have a 5 thousand dollar printer, it’s nothing without those tweaks!BUTThat doesn’t mean it is a waste, far from it. I like this little kit and it’s a nice humble addition to my lovely soldier that is my Ender 3 Pro. My stock extruder clamp actually managed to snap one day after several months of use, but with this version I certainly won’t have that issue again! It fit really well and so long as you assemble it correctly, the tolerances and accuracy was excellent. Having tried one of the red “off brand” versions just prior, that thing sucked. This one has actual precision in its creation, I was actually amazed because I wasn’t really expecting much of a real difference either. I could go off about just how crappy the red one I got prior, but I digress.The Capricorn tubing is nice and it is better than the stock PTFE tubing, but it is also not magic either. The tolerances and precision of the tubing IS better, I checked. For most standard print materials like PLA and PETG, there is exactly zero difference using this, despite being superior. HOWEVER, with other filaments and special use cases, there IS a difference. Some TPUs and filaments that happen to run particularly hot (like, hot hot) you will actually find there is benefit to this tubing. I will give credit where credit is due there, I just don’t want people getting the wrong idea that these things just magically make better prints - it just isn’t that simple most of the time.The addition of the bed springs is, I mean, sure why not? I hope I don’t really need to explain that this isn’t going to be magic either, but they seem very well made and I imagine will hold their leveling for a while.At the end of the day - Yes it is a solid upgrade IF you have already given your printer the proper love and attention so it can do it’s best already. The added durability of parts and flexibility for options, coupled with a nice style - I do certainly recommend it. Just make sure you actually understand it before falling into the placebo of magically better prints like some reviews seem to have done. That isn’t anecdotal evidence that it doesn’t improve prints - It is just straight up not really how a 3D printer works. But if you want a lil upgrade for your Ender 3, by all means this is a good choice.
Nick
Comentado en los Estados Unidos el 16 de octubre de 2021
This is a great little kit, don't get me wrong - it is great value and adds some small nice improvements but some of the reviews are outright misleading.No, this won’t increase your print quality basically at allNor does it allow you to increase print speed in any way.The amount of factors that contribute to the end product of a print are many and tiny tweaks here and there can be either imperceptible or be the difference of printing a blob of ugly plastic spaghetti.Good calibration and tuning of your settings, steppers, flow rate, temps, retractions, leveling, and combing settings are going to have infinitely more of an impact on your print quality and speed than most physical upgrades and this product is no exception. If you want more out of your printer, look into those things first! Even if you have a 5 thousand dollar printer, it’s nothing without those tweaks!BUTThat doesn’t mean it is a waste, far from it. I like this little kit and it’s a nice humble addition to my lovely soldier that is my Ender 3 Pro. My stock extruder clamp actually managed to snap one day after several months of use, but with this version I certainly won’t have that issue again! It fit really well and so long as you assemble it correctly, the tolerances and accuracy was excellent. Having tried one of the red “off brand” versions just prior, that thing sucked. This one has actual precision in its creation, I was actually amazed because I wasn’t really expecting much of a real difference either. I could go off about just how crappy the red one I got prior, but I digress.The Capricorn tubing is nice and it is better than the stock PTFE tubing, but it is also not magic either. The tolerances and precision of the tubing IS better, I checked. For most standard print materials like PLA and PETG, there is exactly zero difference using this, despite being superior. HOWEVER, with other filaments and special use cases, there IS a difference. Some TPUs and filaments that happen to run particularly hot (like, hot hot) you will actually find there is benefit to this tubing. I will give credit where credit is due there, I just don’t want people getting the wrong idea that these things just magically make better prints - it just isn’t that simple most of the time.The addition of the bed springs is, I mean, sure why not? I hope I don’t really need to explain that this isn’t going to be magic either, but they seem very well made and I imagine will hold their leveling for a while.At the end of the day - Yes it is a solid upgrade IF you have already given your printer the proper love and attention so it can do it’s best already. The added durability of parts and flexibility for options, coupled with a nice style - I do certainly recommend it. Just make sure you actually understand it before falling into the placebo of magically better prints like some reviews seem to have done. That isn’t anecdotal evidence that it doesn’t improve prints - It is just straight up not really how a 3D printer works. But if you want a lil upgrade for your Ender 3, by all means this is a good choice.
Nick
Comentado en los Estados Unidos el 16 de octubre de 2021
This is a great little kit, don't get me wrong - it is great value and adds some small nice improvements but some of the reviews are outright misleading.No, this won’t increase your print quality basically at allNor does it allow you to increase print speed in any way.The amount of factors that contribute to the end product of a print are many and tiny tweaks here and there can be either imperceptible or be the difference of printing a blob of ugly plastic spaghetti.Good calibration and tuning of your settings, steppers, flow rate, temps, retractions, leveling, and combing settings are going to have infinitely more of an impact on your print quality and speed than most physical upgrades and this product is no exception. If you want more out of your printer, look into those things first! Even if you have a 5 thousand dollar printer, it’s nothing without those tweaks!BUTThat doesn’t mean it is a waste, far from it. I like this little kit and it’s a nice humble addition to my lovely soldier that is my Ender 3 Pro. My stock extruder clamp actually managed to snap one day after several months of use, but with this version I certainly won’t have that issue again! It fit really well and so long as you assemble it correctly, the tolerances and accuracy was excellent. Having tried one of the red “off brand” versions just prior, that thing sucked. This one has actual precision in its creation, I was actually amazed because I wasn’t really expecting much of a real difference either. I could go off about just how crappy the red one I got prior, but I digress.The Capricorn tubing is nice and it is better than the stock PTFE tubing, but it is also not magic either. The tolerances and precision of the tubing IS better, I checked. For most standard print materials like PLA and PETG, there is exactly zero difference using this, despite being superior. HOWEVER, with other filaments and special use cases, there IS a difference. Some TPUs and filaments that happen to run particularly hot (like, hot hot) you will actually find there is benefit to this tubing. I will give credit where credit is due there, I just don’t want people getting the wrong idea that these things just magically make better prints - it just isn’t that simple most of the time.The addition of the bed springs is, I mean, sure why not? I hope I don’t really need to explain that this isn’t going to be magic either, but they seem very well made and I imagine will hold their leveling for a while.At the end of the day - Yes it is a solid upgrade IF you have already given your printer the proper love and attention so it can do it’s best already. The added durability of parts and flexibility for options, coupled with a nice style - I do certainly recommend it. Just make sure you actually understand it before falling into the placebo of magically better prints like some reviews seem to have done. That isn’t anecdotal evidence that it doesn’t improve prints - It is just straight up not really how a 3D printer works. But if you want a lil upgrade for your Ender 3, by all means this is a good choice.
Nick
Comentado en los Estados Unidos el 16 de octubre de 2021
This is a great little kit, don't get me wrong - it is great value and adds some small nice improvements but some of the reviews are outright misleading.No, this won’t increase your print quality basically at allNor does it allow you to increase print speed in any way.The amount of factors that contribute to the end product of a print are many and tiny tweaks here and there can be either imperceptible or be the difference of printing a blob of ugly plastic spaghetti.Good calibration and tuning of your settings, steppers, flow rate, temps, retractions, leveling, and combing settings are going to have infinitely more of an impact on your print quality and speed than most physical upgrades and this product is no exception. If you want more out of your printer, look into those things first! Even if you have a 5 thousand dollar printer, it’s nothing without those tweaks!BUTThat doesn’t mean it is a waste, far from it. I like this little kit and it’s a nice humble addition to my lovely soldier that is my Ender 3 Pro. My stock extruder clamp actually managed to snap one day after several months of use, but with this version I certainly won’t have that issue again! It fit really well and so long as you assemble it correctly, the tolerances and accuracy was excellent. Having tried one of the red “off brand” versions just prior, that thing sucked. This one has actual precision in its creation, I was actually amazed because I wasn’t really expecting much of a real difference either. I could go off about just how crappy the red one I got prior, but I digress.The Capricorn tubing is nice and it is better than the stock PTFE tubing, but it is also not magic either. The tolerances and precision of the tubing IS better, I checked. For most standard print materials like PLA and PETG, there is exactly zero difference using this, despite being superior. HOWEVER, with other filaments and special use cases, there IS a difference. Some TPUs and filaments that happen to run particularly hot (like, hot hot) you will actually find there is benefit to this tubing. I will give credit where credit is due there, I just don’t want people getting the wrong idea that these things just magically make better prints - it just isn’t that simple most of the time.The addition of the bed springs is, I mean, sure why not? I hope I don’t really need to explain that this isn’t going to be magic either, but they seem very well made and I imagine will hold their leveling for a while.At the end of the day - Yes it is a solid upgrade IF you have already given your printer the proper love and attention so it can do it’s best already. The added durability of parts and flexibility for options, coupled with a nice style - I do certainly recommend it. Just make sure you actually understand it before falling into the placebo of magically better prints like some reviews seem to have done. That isn’t anecdotal evidence that it doesn’t improve prints - It is just straight up not really how a 3D printer works. But if you want a lil upgrade for your Ender 3, by all means this is a good choice.
Nick
Comentado en los Estados Unidos el 16 de octubre de 2021
This is a great little kit, don't get me wrong - it is great value and adds some small nice improvements but some of the reviews are outright misleading.No, this won’t increase your print quality basically at allNor does it allow you to increase print speed in any way.The amount of factors that contribute to the end product of a print are many and tiny tweaks here and there can be either imperceptible or be the difference of printing a blob of ugly plastic spaghetti.Good calibration and tuning of your settings, steppers, flow rate, temps, retractions, leveling, and combing settings are going to have infinitely more of an impact on your print quality and speed than most physical upgrades and this product is no exception. If you want more out of your printer, look into those things first! Even if you have a 5 thousand dollar printer, it’s nothing without those tweaks!BUTThat doesn’t mean it is a waste, far from it. I like this little kit and it’s a nice humble addition to my lovely soldier that is my Ender 3 Pro. My stock extruder clamp actually managed to snap one day after several months of use, but with this version I certainly won’t have that issue again! It fit really well and so long as you assemble it correctly, the tolerances and accuracy was excellent. Having tried one of the red “off brand” versions just prior, that thing sucked. This one has actual precision in its creation, I was actually amazed because I wasn’t really expecting much of a real difference either. I could go off about just how crappy the red one I got prior, but I digress.The Capricorn tubing is nice and it is better than the stock PTFE tubing, but it is also not magic either. The tolerances and precision of the tubing IS better, I checked. For most standard print materials like PLA and PETG, there is exactly zero difference using this, despite being superior. HOWEVER, with other filaments and special use cases, there IS a difference. Some TPUs and filaments that happen to run particularly hot (like, hot hot) you will actually find there is benefit to this tubing. I will give credit where credit is due there, I just don’t want people getting the wrong idea that these things just magically make better prints - it just isn’t that simple most of the time.The addition of the bed springs is, I mean, sure why not? I hope I don’t really need to explain that this isn’t going to be magic either, but they seem very well made and I imagine will hold their leveling for a while.At the end of the day - Yes it is a solid upgrade IF you have already given your printer the proper love and attention so it can do it’s best already. The added durability of parts and flexibility for options, coupled with a nice style - I do certainly recommend it. Just make sure you actually understand it before falling into the placebo of magically better prints like some reviews seem to have done. That isn’t anecdotal evidence that it doesn’t improve prints - It is just straight up not really how a 3D printer works. But if you want a lil upgrade for your Ender 3, by all means this is a good choice.
Nick
Comentado en los Estados Unidos el 16 de octubre de 2021
This is a great little kit, don't get me wrong - it is great value and adds some small nice improvements but some of the reviews are outright misleading.No, this won’t increase your print quality basically at allNor does it allow you to increase print speed in any way.The amount of factors that contribute to the end product of a print are many and tiny tweaks here and there can be either imperceptible or be the difference of printing a blob of ugly plastic spaghetti.Good calibration and tuning of your settings, steppers, flow rate, temps, retractions, leveling, and combing settings are going to have infinitely more of an impact on your print quality and speed than most physical upgrades and this product is no exception. If you want more out of your printer, look into those things first! Even if you have a 5 thousand dollar printer, it’s nothing without those tweaks!BUTThat doesn’t mean it is a waste, far from it. I like this little kit and it’s a nice humble addition to my lovely soldier that is my Ender 3 Pro. My stock extruder clamp actually managed to snap one day after several months of use, but with this version I certainly won’t have that issue again! It fit really well and so long as you assemble it correctly, the tolerances and accuracy was excellent. Having tried one of the red “off brand” versions just prior, that thing sucked. This one has actual precision in its creation, I was actually amazed because I wasn’t really expecting much of a real difference either. I could go off about just how crappy the red one I got prior, but I digress.The Capricorn tubing is nice and it is better than the stock PTFE tubing, but it is also not magic either. The tolerances and precision of the tubing IS better, I checked. For most standard print materials like PLA and PETG, there is exactly zero difference using this, despite being superior. HOWEVER, with other filaments and special use cases, there IS a difference. Some TPUs and filaments that happen to run particularly hot (like, hot hot) you will actually find there is benefit to this tubing. I will give credit where credit is due there, I just don’t want people getting the wrong idea that these things just magically make better prints - it just isn’t that simple most of the time.The addition of the bed springs is, I mean, sure why not? I hope I don’t really need to explain that this isn’t going to be magic either, but they seem very well made and I imagine will hold their leveling for a while.At the end of the day - Yes it is a solid upgrade IF you have already given your printer the proper love and attention so it can do it’s best already. The added durability of parts and flexibility for options, coupled with a nice style - I do certainly recommend it. Just make sure you actually understand it before falling into the placebo of magically better prints like some reviews seem to have done. That isn’t anecdotal evidence that it doesn’t improve prints - It is just straight up not really how a 3D printer works. But if you want a lil upgrade for your Ender 3, by all means this is a good choice.
Nick
Comentado en los Estados Unidos el 16 de octubre de 2021
This is a great little kit, don't get me wrong - it is great value and adds some small nice improvements but some of the reviews are outright misleading.No, this won’t increase your print quality basically at allNor does it allow you to increase print speed in any way.The amount of factors that contribute to the end product of a print are many and tiny tweaks here and there can be either imperceptible or be the difference of printing a blob of ugly plastic spaghetti.Good calibration and tuning of your settings, steppers, flow rate, temps, retractions, leveling, and combing settings are going to have infinitely more of an impact on your print quality and speed than most physical upgrades and this product is no exception. If you want more out of your printer, look into those things first! Even if you have a 5 thousand dollar printer, it’s nothing without those tweaks!BUTThat doesn’t mean it is a waste, far from it. I like this little kit and it’s a nice humble addition to my lovely soldier that is my Ender 3 Pro. My stock extruder clamp actually managed to snap one day after several months of use, but with this version I certainly won’t have that issue again! It fit really well and so long as you assemble it correctly, the tolerances and accuracy was excellent. Having tried one of the red “off brand” versions just prior, that thing sucked. This one has actual precision in its creation, I was actually amazed because I wasn’t really expecting much of a real difference either. I could go off about just how crappy the red one I got prior, but I digress.The Capricorn tubing is nice and it is better than the stock PTFE tubing, but it is also not magic either. The tolerances and precision of the tubing IS better, I checked. For most standard print materials like PLA and PETG, there is exactly zero difference using this, despite being superior. HOWEVER, with other filaments and special use cases, there IS a difference. Some TPUs and filaments that happen to run particularly hot (like, hot hot) you will actually find there is benefit to this tubing. I will give credit where credit is due there, I just don’t want people getting the wrong idea that these things just magically make better prints - it just isn’t that simple most of the time.The addition of the bed springs is, I mean, sure why not? I hope I don’t really need to explain that this isn’t going to be magic either, but they seem very well made and I imagine will hold their leveling for a while.At the end of the day - Yes it is a solid upgrade IF you have already given your printer the proper love and attention so it can do it’s best already. The added durability of parts and flexibility for options, coupled with a nice style - I do certainly recommend it. Just make sure you actually understand it before falling into the placebo of magically better prints like some reviews seem to have done. That isn’t anecdotal evidence that it doesn’t improve prints - It is just straight up not really how a 3D printer works. But if you want a lil upgrade for your Ender 3, by all means this is a good choice.
Nick
Comentado en los Estados Unidos el 16 de octubre de 2021
This is a great little kit, don't get me wrong - it is great value and adds some small nice improvements but some of the reviews are outright misleading.No, this won’t increase your print quality basically at allNor does it allow you to increase print speed in any way.The amount of factors that contribute to the end product of a print are many and tiny tweaks here and there can be either imperceptible or be the difference of printing a blob of ugly plastic spaghetti.Good calibration and tuning of your settings, steppers, flow rate, temps, retractions, leveling, and combing settings are going to have infinitely more of an impact on your print quality and speed than most physical upgrades and this product is no exception. If you want more out of your printer, look into those things first! Even if you have a 5 thousand dollar printer, it’s nothing without those tweaks!BUTThat doesn’t mean it is a waste, far from it. I like this little kit and it’s a nice humble addition to my lovely soldier that is my Ender 3 Pro. My stock extruder clamp actually managed to snap one day after several months of use, but with this version I certainly won’t have that issue again! It fit really well and so long as you assemble it correctly, the tolerances and accuracy was excellent. Having tried one of the red “off brand” versions just prior, that thing sucked. This one has actual precision in its creation, I was actually amazed because I wasn’t really expecting much of a real difference either. I could go off about just how crappy the red one I got prior, but I digress.The Capricorn tubing is nice and it is better than the stock PTFE tubing, but it is also not magic either. The tolerances and precision of the tubing IS better, I checked. For most standard print materials like PLA and PETG, there is exactly zero difference using this, despite being superior. HOWEVER, with other filaments and special use cases, there IS a difference. Some TPUs and filaments that happen to run particularly hot (like, hot hot) you will actually find there is benefit to this tubing. I will give credit where credit is due there, I just don’t want people getting the wrong idea that these things just magically make better prints - it just isn’t that simple most of the time.The addition of the bed springs is, I mean, sure why not? I hope I don’t really need to explain that this isn’t going to be magic either, but they seem very well made and I imagine will hold their leveling for a while.At the end of the day - Yes it is a solid upgrade IF you have already given your printer the proper love and attention so it can do it’s best already. The added durability of parts and flexibility for options, coupled with a nice style - I do certainly recommend it. Just make sure you actually understand it before falling into the placebo of magically better prints like some reviews seem to have done. That isn’t anecdotal evidence that it doesn’t improve prints - It is just straight up not really how a 3D printer works. But if you want a lil upgrade for your Ender 3, by all means this is a good choice.
Cliente de
Comentado en México el 22 de septiembre de 2021
Definitivamente esta extrusora tiene mejor calidad que la original, pero tiene algunos detallitos.1: Su resorte es más duro de lo conveniente, esto hace que se muerdan algunos filamentos.2: Al ser de metal conduce más el calor del motor, y cuando se imprime objetos con muchas retracciones el filamento se calienta, se suaviza y el alimentador deja de empujar el fulamento por la manguera, arruinando por completo la impresión.3: Raspa ligeramente el filamento a la entrada, antes del alimentador, esto hace que después de un buen rato de impresión se cubra de polvo de filamento partes de la impresora.Mejoras respecto al original.1: Mejor aspecto (solo es cosmético, no influye en su funcionamiento).2: Al tener la entrada de la manguera más cercana al alimentador el filamento, aún estando sobrecalentado no se sale de su lugar a diferencia del original, con el que varias impresiones se me dañaron debido a que el filamento se comenzó por el espacio que hay entre el alimentador y la entrada a la manguera.3: Apto para filamentos fliexibles.
Cliente de
Comentado en México el 22 de septiembre de 2021
Definitivamente esta extrusora tiene mejor calidad que la original, pero tiene algunos detallitos.1: Su resorte es más duro de lo conveniente, esto hace que se muerdan algunos filamentos.2: Al ser de metal conduce más el calor del motor, y cuando se imprime objetos con muchas retracciones el filamento se calienta, se suaviza y el alimentador deja de empujar el fulamento por la manguera, arruinando por completo la impresión.3: Raspa ligeramente el filamento a la entrada, antes del alimentador, esto hace que después de un buen rato de impresión se cubra de polvo de filamento partes de la impresora.Mejoras respecto al original.1: Mejor aspecto (solo es cosmético, no influye en su funcionamiento).2: Al tener la entrada de la manguera más cercana al alimentador el filamento, aún estando sobrecalentado no se sale de su lugar a diferencia del original, con el que varias impresiones se me dañaron debido a que el filamento se comenzó por el espacio que hay entre el alimentador y la entrada a la manguera.3: Apto para filamentos fliexibles.
Cliente de
Comentado en México el 22 de septiembre de 2021
Definitivamente esta extrusora tiene mejor calidad que la original, pero tiene algunos detallitos.1: Su resorte es más duro de lo conveniente, esto hace que se muerdan algunos filamentos.2: Al ser de metal conduce más el calor del motor, y cuando se imprime objetos con muchas retracciones el filamento se calienta, se suaviza y el alimentador deja de empujar el fulamento por la manguera, arruinando por completo la impresión.3: Raspa ligeramente el filamento a la entrada, antes del alimentador, esto hace que después de un buen rato de impresión se cubra de polvo de filamento partes de la impresora.Mejoras respecto al original.1: Mejor aspecto (solo es cosmético, no influye en su funcionamiento).2: Al tener la entrada de la manguera más cercana al alimentador el filamento, aún estando sobrecalentado no se sale de su lugar a diferencia del original, con el que varias impresiones se me dañaron debido a que el filamento se comenzó por el espacio que hay entre el alimentador y la entrada a la manguera.3: Apto para filamentos fliexibles.
Cliente de
Comentado en México el 22 de septiembre de 2021
Definitivamente esta extrusora tiene mejor calidad que la original, pero tiene algunos detallitos.1: Su resorte es más duro de lo conveniente, esto hace que se muerdan algunos filamentos.2: Al ser de metal conduce más el calor del motor, y cuando se imprime objetos con muchas retracciones el filamento se calienta, se suaviza y el alimentador deja de empujar el fulamento por la manguera, arruinando por completo la impresión.3: Raspa ligeramente el filamento a la entrada, antes del alimentador, esto hace que después de un buen rato de impresión se cubra de polvo de filamento partes de la impresora.Mejoras respecto al original.1: Mejor aspecto (solo es cosmético, no influye en su funcionamiento).2: Al tener la entrada de la manguera más cercana al alimentador el filamento, aún estando sobrecalentado no se sale de su lugar a diferencia del original, con el que varias impresiones se me dañaron debido a que el filamento se comenzó por el espacio que hay entre el alimentador y la entrada a la manguera.3: Apto para filamentos fliexibles.
Cliente de
Comentado en México el 22 de septiembre de 2021
Definitivamente esta extrusora tiene mejor calidad que la original, pero tiene algunos detallitos.1: Su resorte es más duro de lo conveniente, esto hace que se muerdan algunos filamentos.2: Al ser de metal conduce más el calor del motor, y cuando se imprime objetos con muchas retracciones el filamento se calienta, se suaviza y el alimentador deja de empujar el fulamento por la manguera, arruinando por completo la impresión.3: Raspa ligeramente el filamento a la entrada, antes del alimentador, esto hace que después de un buen rato de impresión se cubra de polvo de filamento partes de la impresora.Mejoras respecto al original.1: Mejor aspecto (solo es cosmético, no influye en su funcionamiento).2: Al tener la entrada de la manguera más cercana al alimentador el filamento, aún estando sobrecalentado no se sale de su lugar a diferencia del original, con el que varias impresiones se me dañaron debido a que el filamento se comenzó por el espacio que hay entre el alimentador y la entrada a la manguera.3: Apto para filamentos fliexibles.
Cliente de
Comentado en México el 22 de septiembre de 2021
Definitivamente esta extrusora tiene mejor calidad que la original, pero tiene algunos detallitos.1: Su resorte es más duro de lo conveniente, esto hace que se muerdan algunos filamentos.2: Al ser de metal conduce más el calor del motor, y cuando se imprime objetos con muchas retracciones el filamento se calienta, se suaviza y el alimentador deja de empujar el fulamento por la manguera, arruinando por completo la impresión.3: Raspa ligeramente el filamento a la entrada, antes del alimentador, esto hace que después de un buen rato de impresión se cubra de polvo de filamento partes de la impresora.Mejoras respecto al original.1: Mejor aspecto (solo es cosmético, no influye en su funcionamiento).2: Al tener la entrada de la manguera más cercana al alimentador el filamento, aún estando sobrecalentado no se sale de su lugar a diferencia del original, con el que varias impresiones se me dañaron debido a que el filamento se comenzó por el espacio que hay entre el alimentador y la entrada a la manguera.3: Apto para filamentos fliexibles.
Cliente de
Comentado en México el 22 de septiembre de 2021
Definitivamente esta extrusora tiene mejor calidad que la original, pero tiene algunos detallitos.1: Su resorte es más duro de lo conveniente, esto hace que se muerdan algunos filamentos.2: Al ser de metal conduce más el calor del motor, y cuando se imprime objetos con muchas retracciones el filamento se calienta, se suaviza y el alimentador deja de empujar el fulamento por la manguera, arruinando por completo la impresión.3: Raspa ligeramente el filamento a la entrada, antes del alimentador, esto hace que después de un buen rato de impresión se cubra de polvo de filamento partes de la impresora.Mejoras respecto al original.1: Mejor aspecto (solo es cosmético, no influye en su funcionamiento).2: Al tener la entrada de la manguera más cercana al alimentador el filamento, aún estando sobrecalentado no se sale de su lugar a diferencia del original, con el que varias impresiones se me dañaron debido a que el filamento se comenzó por el espacio que hay entre el alimentador y la entrada a la manguera.3: Apto para filamentos fliexibles.
Cliente de
Comentado en México el 22 de septiembre de 2021
Definitivamente esta extrusora tiene mejor calidad que la original, pero tiene algunos detallitos.1: Su resorte es más duro de lo conveniente, esto hace que se muerdan algunos filamentos.2: Al ser de metal conduce más el calor del motor, y cuando se imprime objetos con muchas retracciones el filamento se calienta, se suaviza y el alimentador deja de empujar el fulamento por la manguera, arruinando por completo la impresión.3: Raspa ligeramente el filamento a la entrada, antes del alimentador, esto hace que después de un buen rato de impresión se cubra de polvo de filamento partes de la impresora.Mejoras respecto al original.1: Mejor aspecto (solo es cosmético, no influye en su funcionamiento).2: Al tener la entrada de la manguera más cercana al alimentador el filamento, aún estando sobrecalentado no se sale de su lugar a diferencia del original, con el que varias impresiones se me dañaron debido a que el filamento se comenzó por el espacio que hay entre el alimentador y la entrada a la manguera.3: Apto para filamentos fliexibles.
Productos recomendados

Mex $592.49

Mex $ 319 .00 Mex $319.00

4.8
Elegir

Mex $312.39

Mex $ 171 .00 Mex $171.00

4.6
Elegir