Carro de la compra

No hay artículos en el carro

No hay artículos en el carro

Corsair Vengeance DDR5 RAM 32GB (2x16GB) 6400MHz CL36-48-48-104 1.35V AMD Expo Intel XMP 3.0 Memoria de Ordenador de Sobremesa – Gris (CMK32GX5M2B6400Z36)

Envío gratis en pedidos superiores a Mex $600.00

Mex $366.37

Mex $ 164 .00 Mex $164.00

En stock

Acerca de este artículo

  • Compatible con: repuesto para Nissan Sentra 1.8L 2013 2014 2015; repuesto para válvula de compresor Sanden PXC14 CA
  • Número de pieza: MT3402, 43MT3402, EV053
  • El paquete incluye: 1 válvula de control electrónico de compresor de aire acondicionado como se muestra en la imagen
  • Alta calidad: hecho de material de alta calidad para una larga durabilidad, perfecto para el coche original
  • Nota: Verifica que este es el número de pieza correcto antes de realizar el pedido



Descripción del producto

1
3

Repuesto para compresor Nissan Sentra 1.8L PXC14

Sustituye al número de pieza: MT3402, 43MT3402, EV053 El paquete incluye: 1 válvula de control de compresor de A/C. Características: 2 pines

4

1. Reemplazo directo, fácil instalación2. Hecho de material de alta calidad para una larga durabilidad, combinación perfecta para el coche original. 3. Viene en un paquete sellado, listo para instalar. 4. Comprueba el número de pieza antes de comprar para garantizar el ajuste


Maurice Anthony Henry
Comentado en los Estados Unidos el 30 de marzo de 2025
Solid RAM for AMD fast and reliable.
MSep
Comentado en los Estados Unidos el 20 de marzo de 2025
Works well, no issues yet and for the price it was worth it
YEINER RADILLO OVALLE
Comentado en los Estados Unidos el 5 de febrero de 2025
Son buenas Ram, pero no son las de la fotos, como las queria RGB , me toco devolverlas :(
MAYCON HENRIQUE DE ALMEIDA LUGAREZI
Comentado en Brasil el 11 de febrero de 2025
Memória excelentes, porém não recebi conforme solicitado, memórias com RGB e vieram sem RGB.
dinker madra
Comentado en Australia el 31 de enero de 2025
Misleading. Product is not RGB as shown in picture.
Ricardo Álvarez
Comentado en México el 6 de agosto de 2024
El auto no enfriaba absolutamente nada, se le hizo un vacío al sistema de a/c, se instaló la válvula, se recargo gas y funcionó correctamente, el a/c volvió a enfriar. Falta comprobar la durabilidad de la pieza.
Carrito
Comentado en los Estados Unidos el 9 de junio de 2024
Worked great on my nissan sentra 2019,once installed ac was cold again! Works like magic!!
MPD
Comentado en los Estados Unidos el 17 de junio de 2024
Happy with my purchase and help me to save money, long history I bought a 2013 Nissan Sentra SV for my daughter last winter and was not possible to detect AC malfunctions at the time we detected the problem late spring and wasn’t cooling at all. Paid a mechanic to do a complete AC service they vacuumed all the Freon and cleaned the whole system refilled everything and seemed to be working fine.A week or two later when temperatures were going up and up detected that the AC was cooling but not enough and only when the car was in motion, not cooling when idling and not cooling enough when in motion as well. I watched a few videos of cars with similar symptoms and all pointed to this part.The mechanic insisted that the AC compressor and condenser has to be replaced and wanted $1000 for the whole repair this seemed fishy to me because I can buy the parts by myself for around $350 and other $300 for installation.I bought this $20 part and took it to the mechanic and he acted kind of mad and insisted this part won’t do anything and he installed a lot of this and at the beginning he didn’t even know what part was it. He didn’t wanted to do anything and I told him to install either way and if that doesn’t work is my loss, he seemed disappointed but accepted to swap the part.Charge me $100 for the job and he serviced the system again for the same money I paid him before and that’s why I took it to him to make the $260 I paid him first worth. After they installed the part the AC is blowing ice cold air again. Cost me $385 total to get things working again but that’s better than paying what the mechanic was asking for the whole repair.The installation is easy when you have the right tools and equipment, seems of good quality, fit perfectly and comes with all seals and ready to install no leaks and my AC is working great.If you have a Freon vacuum is a really simple DIY but in my case had to take it to the mechanic to save my money from the service and recharge they did at the beginning.Highly recommended part
JavierN
Comentado en México el 10 de junio de 2024
ME LLEGO AYER DOMINGO Y YA HOY LUNES QUEDÓ INSTALADA Y TODO ESTA FUNCIONANDO PERFECTO
Cliente de
Comentado en México el 17 de agosto de 2023
La compre para un sentra 2017 y quedo perfecta, se soluciono el detalle que no enfriaba lo suficiente el AAC
AvidReader
Comentado en los Estados Unidos el 19 de julio de 2023
I bought this for a 2014 Nissan Sentra SV. It worked great. It was a bit of a pain to get in but only because the sensor on this model sticks out the side with only about three inches of space. But beyond that I, a middle-aged woman who's never worked on a car in her life, was able to fix her daughter's AC. So much cheaper than the Auto stores around where I live. This same part was about 80$ from their stores. It was around 22$ on here when I bought it. Well worth the investment.
I love Stuff
Comentado en los Estados Unidos el 23 de mayo de 2023
We were having trouble with AC. We live in Phoenix AZ and it is above 100F. The AC would be slightly cooler than outside temp when driving. It would get really warm while idle or stopped. My manifold gauges showed high low side pressure and low high side pressure. This led me to diagnose trouble with the compressor, but the compressor was running when it was suppose to. Going the valve route was a way to affordably trouble shoot before moving on to bigger more expensive repairs.I evacuated my AC completely. You have to, since the valve is under pressure. The valve is pointed towards front of the vehicle or towards the radiator. It is a tight area, but you can remove and reinstall the replacement without removing the compressor. You will need ring clip pliers or a good set of needle nose pliers to remove the clip. There will also be one plastic cover that needs to be removed to access the compressor from the bottom.It took me about 15 minutes to remove the plastic cover, take out the old valve and replace. That is with the proper tools. This does not include the evacuation and refill of the coolant.It works. It is cheaper than OEM. I would buy again.
June Walker
Comentado en los Estados Unidos el 12 de septiembre de 2022
Easy to install
Productos recomendados

Mex $342.00

Mex $ 171 .00 Mex $171.00

4.6
Elegir

Mex $387.86

Mex $ 209 .00 Mex $209.00

5.0
Elegir

Mex $1,258.78

Mex $ 616 .00 Mex $616.00

4.9
Elegir

Mex $1,144.54

Mex $ 480 .00 Mex $480.00

4.8
Elegir

Mex $352.86

Mex $ 183 .00 Mex $183.00

4.9
Elegir