No hay artículos en el carro
No hay artículos en el carroJapheth
Comentado en México el 26 de junio de 2023
Cumple con características
Cachorro
Comentado en México el 24 de mayo de 2022
Un producto sensacional
Miguel
Comentado en México el 19 de enero de 2022
Hace ruido aceptable y es muy bonito
Gilberto Galán
Comentado en México el 6 de abril de 2022
Muy buen gabinete, cumplió mis expectativas y sin duda lo recomendaría
Enrique Ahumada
Comentado en México el 12 de abril de 2022
excelente
Tyler
Comentado en Canadá el 11 de diciembre de 2021
I still have the plastic on the front glass and rear glass to protect it but the case is pretty big, easy to work with cable management wise. I couldn’t figure out how to control the front fans so they’re just running at 100% but they’re quite. I’d buy this if you have large components.
Usuario
Comentado en México el 10 de diciembre de 2021
El gabinete es de buena calidad, se instaló con motherboard ATX Asus Z590, funciona bien, también se le puso Enfriador Cooler Master ML240L V2 de 2 ventiladores en la parte superior (este último reduce el espacio por lo que se tienen que conectar los conectores que lleva la motherboard en la parte superior antes del montaje del enfriador), los 3 ventiladores frontales desplazan suficiente aire, el trasero también, el ruido es el normal para el numero de ventiladores funcionando 3 frontales, uno trasero y 2 superiores del enfriamiento liquido, además de los de la tarjeta de video, en general es un gabinete de buena calidad, los panele laterales de cristal se ven muy bien, donde si veo carencia es en la informacion de instalacion ya que no se describe adecuadamente todos los cables del gabinete para hacer las conexiones mas facilmente.
Yoges
Comentado en Singapur el 28 de enero de 2021
Simple and nice.
DTA
Comentado en México el 15 de septiembre de 2021
en verdad por su precio es bastante bueno se ve bonito con un espacio bastante amplio y una fácil gestión de cables sin duda no se arrepentirán de la compra
やることない廃人
Comentado en Japón el 10 de marzo de 2020
組み立てやすいデザイン悪くない前面マッシュではないのは残念ポイントでもマッシュではないことは分かった上で購入を決めたので総合点は満点です。
Jorge Isaac Perez Cantu
Comentado en México el 21 de octubre de 2020
Excelente gabinete muy vistoso y muy bonito sus leds argb son geniales porque se sincronizado con el aurasync de mi tarjeta madre solo tuve un ligero problema al conectarlos ya que no viene ningún manual que te explique me base en el manual de la tarjeta madre
Agile
Comentado en los Estados Unidos el 28 de febrero de 2019
Edit: 10-13-2020-Still using the case, it works great! Note: **You absolutely CAN fit a radiator in the top of the case. ** I have pictures included from my original install that plainly show that it is possible, and even easy.The price has gone up a bit, probably from how popular the case is, but it's well worth it!_______ original review below__________________I've included screens of my build. Hopefully you can see on the bottom just how "clean" you can make this. I have no external HDDs or SSDs and am using two M.2 drives to make for an extremely quiet build. If you don't read my whole review, be sure to go to the end where I mention something that messed with me for about 2-3 hours that I finally figured out. (A mysterious SATA3 connector.)Going to list off the "pros" of this case:1. The unobtrusive "cutouts". Cable management is a thing! And they do a great job here on this case. Along the bottom where your MOBO meets the case, there are several small holes that you can hardly see until you buy the thing. If you look at my attached pictures, you can get the idea how I ran the cables up through the bottom and did a quick loop back to plug in items like the HD Audio, USB 2 and in my case, the ARBG cable, etc.2. Great cutouts on the sides. I expect to get middle cutouts -but these have some nice rubber padding that keeps a minimum of light from showing through. Additionally, they had the perfect set up for hiding the CPU power at the top of the case/mobo as well. (Look closely at the top left to see what I mean...)3. Airflow. It's hard to get a really good feel for just how much flow is available, but the way they situated the glass panel in the front, and cutouts under the fans as well as on the sides means a TON of air flows through the case. As an added effect, when you look directly at the side of the case, the vents almost GLOW with the color of the fans. I built cases for 20 years and basically poo-poo'd the idea of RGB lighting (or even just plain red or green lights on fans) for years. But about a year ago, I finally got on board, and this case REALLY makes RGB lighting come alive.4. The fans. Lots of complaints from current buyers for some reason. Again, I have no HDDs, though I do have a radiator. I also have the Asus ROG Strix x470 mobo - and it comes with an automatic fan adjuster (that works with overclocking). I'm running my CPU at a consistent 4000Ghz (about an 8 or 10% overclock) and it runs BELOW room temperature. That's with a coolermaster liquid cooler and this case fans on it. Yes, they stay on and only have one speed, but all things considered, it's super quiet, looks great, and does the job beautifully.5. The glass panels and the metal panel cover on the back. The glass is legit. It's HEAVY. I've also dropped it, and it's durable. I love the grommets they use - it's the first time I've had glass panels that the screws stayed right inside the panel, and it's got elegant hooks on the bottom that make re-attaching the cover the .. seriously, bar none, and I've been a data center sys admin for 20+ years, and have probably put the covers on literally a thousand servers and desktops - the easiest cover to open, remove and re-attach of ANY PC/Mac/Tablet/Phone, etc etc - that I've ever touched.As for the metal cover - I love how easy it was to attach. I love that when I put the glass panel back on, since the metal is already lining all your cables up, it (again) makes the glass uber easy to put back on the case. (See my attached picture). All those cables (which include PCI-e and power for the MOBO, the fan cables for RBG and power, the case connectors, etc) - all tucked away, nice and neat under that metal panel.6. Bells and whistles. It's got an extra inch or two of width. Makes fitting in radiators on the top of the case actually a thing. (I had to shop around just to find a case that would do that!) If you read the instructions - and the fact it has its own RGB controller (though it's only a button on the top of the case, so it's rather simplified controls...) that's frickin' cool. USB 2 and 3 (two of each) on the top of the case. I love that the power button has RGB and you can control it. Never, EVER seen a case that let me change the power button color. (Or rotate it along with the rest of the fans, etc). Comes with FOUR fans (One is not RGB, though). Oh, and it's ARGB, if you have a controller (or MOBO) that can take advantage of it. That makes this case REALLY economical.Cons:As someone else mentioned, the area for your power supply is pretty tight. Be sure to test the size of everything first. I'm using a modular 750W PSU, and it fits fine, but I had to plug all my cables that I wanted in first - it just didn't fit/wasn't enough room to try to plug them in after it was tucked in. I originally put my PSU in first, before attaching the modular cables and had to take it back out...Please be sure to look at the advertising material about the case. The pictures that show where your radiator goes are accurate. I used a 240MM radiator on the top and it fits beautifully. (See attached pictures.)It doesn't have a ton of extra screws. That part is true. The instructions are not great. The fact that it ONLY has HDD lights and power switch may throw you for a loop. (I was thankful of this, quite honestly.) There is a connector that came with this thing that REALLY messed with me. It's a SATA3 connector. Just plug it into your power supply. I spent hours looking for what it was supposed to plug into.Other notes (and sorry this got so long! But, I wanted to make sure I put in all the information I could, because this case delivers a TON of value...)Also, the controller cable for the RGB fans included ARE compatible with Asus, Asrock, Gigabyte and MSI. Said controller allows you to use all those manufacturer's motherboards. (One review listed 3 of the 4 above, another person said a motherboard controller couldn't be used at all. Yet, in the bottom row of pictures in Cooler Master's Amazon description (above) in the middle picture you can see the cable right there that allows you to use 4 manufacturer's motherboards.) If you don't have that cable and need it, be sure to return the item and get a version that has the cable. It works great.If you don't have one of the above manufacturers, the button next to the power button works as your RGB controller. (Note: it's not a Reset button. This case only doesn't come with a reset cable or button. Only Power switch and HDD lights.TL;DR: Given that it comes with 4 fans, 3 of them are ARGB, and it's a slightly larger mid-tower that can accommodate a 2 fan radiator (hard to find for less than $150!!) - this is my new favorite case. No, the fans aren't the equivalent of an $80 set, but they're darn close. They are quiet, completely configurable and with all the other bits of hidden engineering (air flow, cut outs, cable management, compatibility with mobo manufacturers, etc) - you get more bang for your buck than nearly any other case.If you check out various review sites regarding this case, you'll see that they agree with me. ;) Nice job, Coolermaster!
Jose Granado
Comentado en España el 3 de diciembre de 2019
Gran caja, espaciosa y bien ventilada, viene con 3 ventiladores ARGB (5V) delanteros y un ventilador trasero, caben radiadores de hasta 240 en la parte superior sin tocar en las RAM, viene con una chapa en la parte trasera para ocultar el cableado en la parte trasera, ya pues tanto el panel izquierdo, como el derecho como el frontal son de cristal templado y se ve absolutamente todo siendo el panel trasero el que trae un patrón en la parte baja para mantener oculta la fuente de alimentación. en la parte del carenado lleva un agujero protegido para pasar los cables PCIE de la GPU, aparte de que tiene espacio más que de sobra para organizar el cableado, le cabe gráficas de cualquier tamaño por lo cual te quitas de encima la pregunta de "cabrá ésta GPU en mi caja?", incluye varios filtros, uno en la parte superior, otro en la parte inferior para la fuente de alimentación y los frontales. el frontal es fácil de retirar, no lleva ningún cable enganchado ya pues tanto las conexiones como los botones de power y led control están incorporados en el propio chasis, lo cual facilita enormemente las labores de mantenimiento y limpieza. el chasis es muy robusto lo que hace de ésta una caja pesada y resistente no solo por los paneles de cristal templado, los paneles son ahumados, pero dejan ver perfectamente el interior del equipo haciendo que resalte más el sistema de iluminación que quieras poner. en definitiva, una caja a la altura a un precio más que acorde a la gran calidad que ofrece, recomendada 100%
Productos recomendados