Vern Olson
Comentado en los Estados Unidos el 17 de marzo de 2025
Fantastic device at a fair price. I was looking at the blackmagic version of this at a studio, these are the exact quality and performance. Very easy to install, I am using them with 3 Lumens PTZ cameras, so far zero issue.
Robert B
Comentado en los Estados Unidos el 2 de febrero de 2025
This Item does not work bi-directional. So you cannot use it extend an HDMI circuit over a COAX by pairing an "HDMI to SDI" & "SDI to HDMI".
Kasheba
Comentado en los Estados Unidos el 6 de enero de 2025
Nice fit true ti size would purchase in different colors
Stephen M.
Comentado en los Estados Unidos el 10 de abril de 2025
Church had other Black Magic converters. I tried these to add additional monitors. Have had zero issues.
Boomer Bloc
Comentado en los Estados Unidos el 30 de diciembre de 2024
Using network-attached storage (NAS) media with the Blackmagic Design ATEM Micro Extreme ISO and the Blackmagic Design Studio HD Plus eliminates the need for SD card formatting. It ensures a seamless workflow for video production. By connecting the Studio HD Plus directly to a NAS via high-speed Ethernet, recorded footage can be stored directly on the NAS, bypassing the potential compatibility and capacity issues of SD cards. This setup reduces the risk of data corruption and reformatting errors and enables easier access for editing teams and centralized storage management, enhancing efficiency in high-demand production environments.
Réal Daigneault
Comentado en Canadá el 15 de diciembre de 2024
Dou et confortable, taille relativement ajusté
Erik Korbely
Comentado en los Estados Unidos el 25 de enero de 2024
Great quality, lovely color. Minimalist, elegant but sporty in the same time. Only thing is… sizing. Definitely order a size bigger than usual. I returned my first one, and ordered a size bigger. Looking forward to enjoy it for a long long time as the quality suggests longevity.
markdvk
Comentado en los Estados Unidos el 5 de septiembre de 2024
When I found these listed, I thought they were Blackmagic Design units just because of their appearance. I didn't look closely and got fooled. I ordered 4 for a project at our church. They were going in the basement and the source was in the other end of the building in the balcony (2 floors away). The cable run from the source to a real BMD distribution box was about 100-150 feet away so it's well under the 300 ft limit. And each of the distributed lines was under 50 feet. Just imagine the time I spent walking back and forth up and down those two flights of stairs trying to diagnose the problem that wasn't going to get solved until I got rid of these converters.The first one I installed partially worked for a short time (an hour or so) , then intermittently, then not at all. It wouldn't even report an SDI signal with it's LED. I put another one in it's place and got a signal with the same cables, and power supply. Since one had not been installed and one failed so quickly, I returned the unopened one on a return and the bad one on a separate return.I had another one installed but it would not carry audio and video at the same time with any relative setting. I could use Level A output on the source HDMI to SDI converter and get video or I could run Level B output and get audio and a corrupted and green video picture on a recent TV and "not supported" on an older TV. I finally found that the converter would run both video and audio at the same time if the frame rate was 30 or lower but I needed 50 or 60 to satisfy another monitor in the setup. I was using an Orei HDMI splitter that provides two options for EDID data and forcing it to 1080P didn't help.The source was a BMD Atem Mini Pro that can output various frame rates at 1080p including 1080p/29.94, 1080P/30, 1080P50, 1080P59.97, and the ever popular 1080P60. At 30 fps or lower, I could get video and audio on the TVs but the two PC monitors I have available for the Atem Mini pro required 50 or 60. At any frame rate over 30, I could not get good video or any audio at the same time whether I was running at Level A or Level B on the sending converter.So I ordered one authentic Blackmagic design converter to see if that helped. It came in a day early today. I set the source to 1080P6, walked downstairs and swapped out the BMD converter in place of the knock off unit using the same cables and had normal video and audio *at the same time*. Just to satisfy my curiosity, I made the round trip to the source again and changed the sending converter to Level B (which is the normal setting) and the BMD worked just fine with that level too.Someone more familiar with this specific tech or with gear to test the input and output signal may have diagnosed the problem faster, but I spent at least 10 hours trying to make it work and researching possible solutions. If I had bought the real thing in the first place I wouldn't have had all that aggravation.
CHAZ
Comentado en México el 29 de junio de 2023
Lo normal de la marca, tampoco es economica asi que siempre esperas lo mejor, esta cumple de manera normal.
RAUL M.
Comentado en México el 9 de febrero de 2023
Me gustó, la talla viene un poco reducida pero esta muy bien
stacy taylor
Comentado en los Estados Unidos el 4 de febrero de 2023
Excellent sweatshirt for my son.
Gslabs
Comentado en los Estados Unidos el 30 de septiembre de 2023
A gray hoodie is basic, and this one is heavy duty high quality one. Sits true to size. All in all, a great one.