No hay artículos en el carro
No hay artículos en el carro Atención:
Por favor, no compres este artículo si no estás seguro de las diferencias entre HDMI y componente y HDMI.
Se ven similares, pero diferentes productos.
Vendemos ambos en Amazon. Si no estás seguro de lo que necesitas, ponte en contacto con nosotros en Amazon primero.
Nota:
1. Los conectores deben estar correctamente conectados. Video: verde se conecta a verde (Y), azul se conecta a azul (Pb), rojo se conecta a rojo (Pr). Audio: el blanco se conecta al blanco, el rojo se conecta al rojo. De lo contrario, hará que la visualización sea anormal.
2. La resolución máxima de la salida del componente es de 1920 x 1080/60Hz, sin especificación 4K para las señales de componentes.
3. Este convertidor no puede decodificar HDCP 2.2. Si no hay imagen cuando se utiliza la entrada HDMI 4k, apague el HDCP 2.2 de su dispositivo.
El convertidor HDMI a componente EASYCEL 4K permite a los usuarios disfrutar de video y audio HDMI de alta definición en televisores, monitores o proyectores YPbPr.
Especificaciones:
1. Resoluciones de entrada HDMI: 480p (60Hz), 576p (50Hz), 720p (50/60Hz), 1080i/p (50/60Hz), 3840x2160p (50/60Hz), 4096x2160p (50/60Hz), 800x600 (6000 (600 10 24 x 768 (60 Hz), 1280 x 800 (60 Hz), 1280 x 960 (60 Hz), 1280 x 1024 (60 Hz), 1440 x 900 (60 Hz).
2. Resoluciones de salida de componentes: 480i (60hz), 480p (60hz), 576i (50hz), 576p (50hz), 720p (50/60Hz), 1080i/p (50/60Hz)
3. Material de la caja: aluminio.
El paquete incluye:
1 convertidor HDMI 4K a YPbPR.
1 fuente de alimentación de 5 V CC.
1 manual de usuario (idioma español no garantizado).
Garantía:
Garantía de un año con servicio posventa de alta calidad.
TC
Comentado en Canadá el 9 de marzo de 2025
Good product..l not as bright as regular HDTV and sometimes has a little ghosting. Adequate for our requirements.
Birdbrain
Comentado en los Estados Unidos el 29 de marzo de 2025
I purchased this converter after discovering that Verizon's upgraded Fios set top box was not going to work with our existing TV setup. The new Fios box only has an HDMI output cable but our existing setup uses component video and RCA cables for surround sound and a whole house music system. The converter is self-explanatory in terms of setup. The HDMI comes in and the component and RCA cables go out to whatever equipment is hooked up using these cables. There is also a short power cord to plug in. I was thrilled to find out that the converter works, which allows us to migrate to the latest Fios box (Verizon tech suggested this solution though in general the company has been a nightmare to work with on this upgrade). Make sure you buy the right product: this converts from HDMI to component, not vice versa. Given that this converter allows us to use Fios STB with our existing AV setup , I think the price is reasonable. We'll see how long it lasts.
David Herbert
Comentado en los Estados Unidos el 7 de agosto de 2024
If you're here, you probably already know what you're looking for; in inexpensive yet high-quality scaler that doesn't just convert an HDMI signal to component, but that can scale down to lower resolutions. In my case, I needed to convert the 1080p signal from an Xbox to 1080i, which is the max resolution of the HD CRT I'm using. *Funny enough, the PS5 actually still supports 1080i, so if your 1080i TV has an HDMI input, you're good to go and won't need this!Anyway, before arriving at this product due to a handy reddit suggestion, I was considering some other much more expensive scalers that are typically used in professional environments. I really didn't want to sacrifice on quality, and I was also concerned about lower quality scalers that might introduce a significant amount of lag. As far as I can tell, the quality of the signal is top notch and there is no noticeable lag. As a tip, I'm using a set of HDretrovision component cables to connect the scaler to the TV. These are just about the highest quality cables on the market, and they're only about $14 here on Amazon. All of which is to say, this thing did exactly what I needed to, and ended up saving me a good amount of money. If you have a similar use case, go for it.
Christian Arnold
Comentado en los Estados Unidos el 18 de febrero de 2024
I'm using this converter to connect my Raspberry Pi 400 to my CRT and for that purpose it works great. I'm pleased with the range of input resolutions and frame rates it supports, which is more than advertised. I'm using it with an input resolution of 800x600/60p to get a bit more screen real estate. It scales it to my TV's native 480i with no issues. Picture quality is excellent; no complaints there.Only thing I wish it had was an aspect ratio/zoom control for use with HD sources on an SD set or vice versa. If you have a 16:9 source on a 4:3 TV, the picture will be stretched vertically to fit the screen. If you wanted that, you would have to get a GBS-C or something similar. There is another adapter going for the same price that does have zoom capability but half the reviews were for a completely different product. I wish Amazon would crack down on that.Other reviewers have complained about latency, but since my use case is SD media consumption, I've not had an issue. It is worth noting that most modern TVs have a couple frames worth of input lag anyway.I have seen some concerns about reliability in other reviews; will update the review if/when it fails.
Customer
Comentado en los Estados Unidos el 10 de febrero de 2024
This HDMI to Component Cable converter works great. I tried a couple of the lower cost ones first but they all either did not work at all, issues with the component cable connections staying connected to converter, or the resolution/color output was terrible. Finally decided to get this "expensive" one and so far so good. The HDMI and Component Cable connections stay put, the unit is large enough to "stay in place", and the output resolution is pretty good. For the streaming I was able to watch from Netflix, Peacock, etc with no stand out resolution or color issues. The only thing that I noticed was when streaming from a cable provider app, the resolution looks a bit off and there appears to be more red. But most viewing will be with streaming providers, I am willing to over look it. Sound also appears to be fine as well.
Jrm
Comentado en México el 23 de julio de 2023
Alguien sabe si funciona con este tipo de tv???Ya que e comprado algunos convertidores parecidos y no funcionan ya que solo funcionan en monitores o tv HDcrt
Daniel M.
Comentado en México el 20 de julio de 2023
Funcionó perfecto para NES mini que era el objetivo, aunque también se probó con una ps3 con sus juegos de ps2, eso sí , el monitor o crt que usen debe aceptar 480i que es lo menos que tiene de salida este dispositivo
Wicho Saenz
Comentado en México el 3 de noviembre de 2023
Tenía duda que pudiera escalar a señal 480i (interlazado) para TV CRT. Estoy utilizando un Google ChromeCast Full HD y me entrega una señal de salida de 1440x480i en un CRT Sony Trinitron 29", y es excepcional la calidad eb brillo, contraste y principalmente en color. Hice algunos ajustes en las configuraciones de servicio de mi televisor, y he logrado casi un aspect ratio 4:3 nativo.
Productos recomendados
Mex $1,886.22
Mex $ 811 .00 Mex $811.00
Mex $230.00
Mex $ 115 .00 Mex $115.00
Mex $269.00
Mex $ 134 .00 Mex $134.00