No hay artículos en el carro
No hay artículos en el carrotyson
Comentado en los Estados Unidos el 1 de marzo de 2024
Arrived on time, not real happy with quality
725
Comentado en los Estados Unidos el 23 de enero de 2024
I ordered 3 packages at the same time. They came as 3 different orders on different days. ?????A lot of the splice joints had the cap closed. You can NOT open once the caps are closed.Ended up sending 2 packages back as they were NOT useable.I will never purchase these ever again.
SOLID
Comentado en los Estados Unidos el 7 de enero de 2023
These are rated at 300v @ 10a. They are ideal for low voltage array series wired power supplies: lights and security systems.I would recommend silicone grease for outdoor exposure and that, when the circuit is fully tested, each tap should be wrapped firmly with electrical or gaffer tape for durability and safety.The physical limitations are: 18 gauge PVC insulated wire or thinner.
Joel Gallegos
Comentado en los Estados Unidos el 5 de enero de 2023
No se pudo cargar el contenido.
Joel and Paula B.
Comentado en los Estados Unidos el 31 de diciembre de 2022
These connectors will come in handy for boat, auto or other smaller electrical projects. These are two wire connectors. The box does not show volts but the connectors do state up to 300V/10A DC/AC on them, but I will stay to low voltage projects on my trailers, boats and vehicles. They can be used for solid or braided wire, even speaker wire, simply cut the wire clean, insert into the slots and pinch tight (I would suggest a good pair of flat pliers, but do not overdo the pressure used). These can also be opened and reused if careful with a small flat screwdriver, and the clear side is convenient so you can see your wires are pushed in all the way before pinching. Should come in handy for different projects I am doing in the Spring.
Productos recomendados