No hay artículos en el carro
No hay artículos en el carro¿Sabías que un mal conducto de secadora podría causar un incendio en tu lavadero? Una acumulación de pelusa, tubos aplanados y mangueras tambaleantes contribuyen a un accidente peligroso pero evitable. Presentamos el conducto de transición para secadora Kelaro, una solución flexible y confiable para tus necesidades de ventilación de secado. Nuestro conducto de secado está hecho de aluminio de alta calidad y cuenta con un diseño fácil de instalar, universalmente compatible. Equipado con dos abrazaderas de tornillo de alta calidad, este conducto de secadora resistente al fuego forma un sello hermético para dirigir los humos y la humedad de forma segura lejos de los espacios vitales. El conducto de transición de secador de múltiples capas está fabricado con laminado de papel de aluminio que encapsula una hélice de alambre de alta densidad y resistente a la corrosión. Superior a otros conductos en el mercado, nuestro producto te proporciona una conexión de manguera de ventilación que no fallará. Compra el tuyo hoy para una solución fácil y confiable que mantendrá tu lavandería última intervensión de riesgos. Características destacadas del producto: Conducto de aluminio flexible de 4 x 10 pies (o 20 pies) compatible con secadores de carga frontal y superior. Fácil de instalar para contratistas o propietarios. Adecuado para aplicaciones de secadora de gas o secadora eléctrica. Compatible universalmente con secadores de Whirlpool, Samsung, LG, GE, Kenmore, Bosch, Maytag, Amana, Electrolux, Speed Queen y mucho más. Conducto de secado resistente al fuego: forma un sello hermético para dirigir los humos y la humedad de forma segura lejos de los espacios vitales. Laminado de aluminio de varias capas que encapsula una hélice de alambre de alta densidad y resistente a la corrosión, construido para reemplazar conductos de vinilo inferiores. El kit incluye: dos abrazaderas de manguera de tornillo sin fin de 4 pulgadas para una conexión segura a la pared y la parte trasera de la secadora. Las abrazaderas mejoradas garantizan una conexión de manguera de ventilación superior que no fallará.
Austin Cody Oneal
Comentado en los Estados Unidos el 27 de mayo de 2023
It works but it was a pain to get on and feels cheaply made
J A Oviedo
Comentado en México el 2 de diciembre de 2023
Calidad en materiales
ines rojas
Comentado en México el 2 de marzo de 2022
Excelente producto cumple con todo lo especificado en la caja del fabricante.
dafna
Comentado en México el 27 de mayo de 2021
excelente producto. su calidad es superior a las que venden en las tlapalerias. es de material muy resistente y esta super largo. no mas pelusas de la secadora volando por todo el cuarto.
Neil P.
Comentado en los Estados Unidos el 23 de octubre de 2020
I’m not a handyman at all. Just an average middle aged dad who can handle lightbulbs and flipping circuit breakers. I’m giving this 5 stars because it exceeded my expectations. I replaced a semi-rigid duct which had become crushed by the previous tenant and was reducing drying efficiency (and possibly raising CO concerns which is why I also bought a CO monitor/alarm). I chose flexible duct because well you can see in the pictures I needed flexibility. I disagree with reviewers who said this is flimsy like aluminum foil. I rough-handled this during install because it was a tight fit on the both ends to the hook-ups. There were no tears when I was done. I turned the elbow joint in the wall around because only one side is crimped and that made installing the duct much easier. I’m concerned with the possibility that people are very unfamiliar with aluminum foil and perhaps should spend more time in the kitchen.
Oh-Gee
Comentado en los Estados Unidos el 3 de noviembre de 2019
The 10ft. length is perfect for my needs. As delicate as this brand's "flexible" aluminum (foil) appears, I found it was pretty sturdy, overall. The duct fit perfectly over the exhaust vent at the back of the dryer, but I had to gently coax the opposite end over the connector to the ductwork exiting our house. I sealed that end with foil tape, then used the "premium" screw clamps to hold everything together.As it is recommended these flex pieces be replaced every couple of years, in combination with a thorough cleaning of the dryer and associated ductwork, I've purchased a spare. It makes a huge difference in dryer performance and significantly reduces the risk of a dryer fire.
Lynne
Comentado en los Estados Unidos el 17 de mayo de 2018
Read a number of reviews before my purchase. The comments about it being a "tight fit for 4 inch dryer opening" and "somewhat delicate" are accurate. Knowing this information, I was able to insert the hose on the dryer and the outside vent successfully with no major problems. Now that it is installed, I think it will work very well. I recommend the duct (hose) for an installation which is not being disturbed very often. If the dryer needs to be moved quite often, I think this duct would not survive continual movement. Overall, very happy with the install, fit, and length of the duct. (My run length was about 7-8 feet, so the 10 foot duct worked out fine.)
Thomas McCollum
Comentado en los Estados Unidos el 24 de marzo de 2017
The length of this duct was exactly what I needed to reach the exhaust on the wall. Shipping was fast, and cost was more than reasonable. The walls of the hose itself was not flimsy at all. My only complaint was the difficulty I experienced when I installed the duct on the dryer; the duct was too tight to slide evenly over the port, and it took close to 20 minutes to get it pushed onto the port and clamped down evenly. However, this product worked well for my application, and I would recommend it to others.
Productos recomendados
Mex $1,433.00
Mex $ 687 .00 Mex $687.00
Mex $801.10
Mex $ 360 .00 Mex $360.00
Mex $293.96
Mex $ 146 .00 Mex $146.00