No se pudo cargar el contenido.

Excelente, buen tamaño y funcionamiento. Material de excelente calidad.

Llegó antes de lo esperado y bien empaquetado sin embargo venía una pieza rota ( no afectó el armado ni soporte, solo fue en una tapa de vista interna) así que sin mayor tema.El armado fue entre 2 personas y siguiendo el instructivo queda.Se ve muy bien , tiene buen tamaño y funcionando correctamente.Lo dejaré en prueba un tiempo y dejaré mi reseña de uso.

Es un escritorio estandar, buen tamaño, buenos acabados. Fue sencillo de armar (leyendo la guia) y mucho mejor si se arma entre dos personas. La ajustabilidad es muy buena, hasta el momento no he tenido problemas con el motor o algo parecido, me gustó que tiene una canastilla inferior para organizar los cables, y dos agujeros en la parte superior donde pueden pasar cables. Tambien me gusto que tiene ruedas lo que lo hace muy conveniente para mover, estas se pueden bloquear si se desea.

El escritorio es muy bobito y funcional y grnade. me gusto mucho, no fue muy dificil ensamblarlo, lo unico malo es que no traia la cesa trasera para acomodar los cables, no se si se consiga, o donde se puede comprar, ya que lo unico malo es que todo queda colgado por atras, pero en si muy bueno y bonito. No se si el fabricante pueda enviarme esa rejilla?

Cumplió su función, material pesado, se siente de buena calidad y fácil armado.

Los materiales, el armado y la funcionalidad está muy bien.El trabajo en casa se hace más confortable.Llego muy rápido.

Me encantó el tamaño, cabe perfecto mi monitor de 32” y mi Mac book pro de 16” y me queda mucho espacio para todo, la atención al cliente es excelente estaba haciendo ruidos al bajar y me enviaron una pata nueva inmediatamente, fácil de armar, súper la recomiendo

No se pudo cargar el contenido.

For the price, I feel like this is an excellent value. So far, the lift on the desk is smooth and responsive. The desk seems study enough and the assembly wasn't terrible. The instructions, though they didn't give me every single step, were easy enough to follow. Not the best or the worst. Good enough.Here are the things that are pretty annoying. the connectors to the power supply aren't long enough to both connect to the power supply. No matter which side you decide to connect the power supply to the desk, one of the cords are too short to reach. To fix this, they include an extender for the side that's too short. The problem is that while the original cords is only 4-5 inches too short, the extender adds about 3-4 feet of cord! So now you've got this massive cord hanging down, and if you don't do something about it it will continually hit your feet. You might even accidentally pull it out or damage the power. They give you some sticky cord holders to put on the underside and hold the cord, but this all just seems like a band-aid for poor design. I'm guessing that the cause of this stems from the bottom section being used for multiple desk sizes/models. It doesn't change my opinion that it's a design flaw.The other thing that is mildly annoying is that the top of the desk comes in four parts. This was expected. It's difficult to ship something as large as this top and it's obvious when looking at the pictures of the desk that it's multiple pieces. No biggie there. The problem is that these pieces, when put together, are not seamless. The middle seam between the wood colored panels are particularly annoying because my keyboard keeps clipping them. I'm probably going to have to cover the whole desk with a thin cover of some sort to prevent this. Otherwise I can imagine that the faux wood sticker is going to wear away there.Overall, I would recommend this desk with a few caveats. If the things I've listed don't bother you, and you want a nice big desk with smooth lift, then this desk is for you!

This desk is perfect for what I wanted. I researched for hours to find the perfect desk for me. This desk was semi easy to put together, I did watch the video as I assembled it, however I do suggest a drill. I did start off with the tools provided but ended up using a drill. It is a bit heavy and does take up some room if you have a small space. It does glide across the floors if you move it slowly. I had no issues with the desk elevating. I’ve had this desk for over a month and it does justice for my purposes. I have two wide monitors 22 inches wide and a laptop that fit nicely on the desk. I’m very pleased with this purchase.

To begin the shipping was fast. The box arrived in decent shape and all the parts were present.Assembly was much faster than expected. Took me about 25 to 30 minutes to get everything together. The instructions are simple, understandable, and accurate. The quality of the parts is predominantly good.This is where I marked off one star. Tip: When constructing the table, ensure that you tighten down the tube connected to the motor. When I first raised the table up it slanted and sounded like it was going to break. Upon further instruction, I realized that the tube was not tightened down on both sides all the way. Once that was corrected, I've only had one other issue with the table.The charging block continues to come out of my upc. Another issue, the desk often becomes non-responsive. That is because there may be a voltage difference between the adapter and the switch of the motor. It is easy remedy by unplugging and reconnecting the controls power cable from the power box.If the three issues above were absent, this would get 5 stars. For now though, it is a good table with some flaws. I would recommend it for those who are willing to endure the issues.

I've been looking for a dual motor larger desk for quite a while. I have one of the original Tresanti 48x24" desks from Costco - that was a nice, sturdy desk that fit 3x24 monitors with no issues. I recently purchased 3x27" monitors which did not fit the tiny Costco desk very well. So I was looking for something larger and something that could handle additional weight (I also wanted to keep my computer on top of the desk).I saw this desk with very little reviews but it's price beat out most of the other large desks in this range and definitely any dual motor desks. I have light grey floors so I thought the light oak with white sides would be good for the room so I pulled the trigger as I am always looking for the best deal.The instructions were clear except for one thing you will have an issue with. The actual steel frame is adjustable for different size desks so you will need to loosen some screws to adjust the sizing of the steel frame. It's very easy to figure out though and as soon as I saw the size of the frame out of the box I knew I would have to adjust those screws. I adjusted on close to the last step where the desk top and the steel frame were already assembled and the steel frame is put upside down on top of the table top (which is top side down on the floor). This allowed me to line up the screw holes while I lengthened the steel frame out. Oh there was also an extension cord for one of the larger motor connectors as extending the steel frame does make the motor too far to plug in straight into the controller but I assumed they had include some kind of extension which they did (the instructions do not mention the extension but you'll figure it out).I have a single triple monitor mount holding 3x27" monitors. The edges of the monitors very slightly extend out of the edges - maybe by about 1 inch on each side. I had already purchased some steel mounting brackets since the Costco desk I had had a glass top so I used that to increase the surface area of the mount on the desk and it is very sturdy and no issues with the clamp. I did have a cheap IKEA desk many years ago and the cheap desks would have issues when you clamped them down (they would squish) but this desk is sturdy and holds the mount with my mounting plates with no issue.If you want to know how low this thing goes and happen to have a Tresanti Costco desk (they were super popular). This goes lower than the Costco desk and the display shows 27" while my Costco one at the lowest setting shows 29". That is too low to be comfortable for me at 5'7" but may be good for you if you are shorter. The Costco one does go a little higher than this desk but at 45 inches it is too high for me. So long story short - this desk goes shorter and higher than I need which is perfect because it has 4 height memory settings which you can program to hit the exact height that you need (as long as it's in your range). I imagine if you are super tall this may not go high enough for you. I like mine at 40" so have an additional 5" of extra height for taller folks.The dual motors are very powerful. It easily does the triple monitors plus I've weighted a substantial amount of my weight on the desk (I'd say at least 100 additional pounds) and it raises with no issues.I also like how these motors are integrated into each leg so no steel rod connector one leg to the other. I've assembled some of the cheaper single motor desks with the rods but I guess this makes sense since the rod is not necessary if each leg is individually powered.All in all I'm very happy with the pros of the desk. The only flaws I do find is I do wish that the desk were more of a perfect rectangle rather than coming curved where I sit. Also the desktop is actually in 4 pieces and there is a slight beveled edge around each corner. So you can feel a slight bump between the seams. The beveled edge would normally be a nice touch around the outsides of the desk but because it continues along the seams that will obviously make a very tiny bump that you can feel with your fingers. It's not noticeable with a mouse (even using no mousepad) but I actually would have preferred no beveled edges anywhere rather than having them everywhere.All in all if this desk is still the cheapest 63x30 inch desk available it's definitely a solid buy if you can get colors that you like. All the parts were included, some instructions were not included but easy to figure out and to be safe they included extra bolts of each size as well as extra wooden dowels.