No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Para un grado industrial, corte rápido en un paso.
Jay242
Comentado en los Estados Unidos el 3 de diciembre de 2024
It does everything it says it will do and more, it's a heavy cut compound and comes out to a nice polished finish at the end. I went through about 10 other bottles of different brands trying to find something that would do what it said it would do this is the only one I found
Omar Stephenson
Comentado en los Estados Unidos el 14 de octubre de 2024
Great cutting compound, does it quickly.
Darvel
Comentado en los Estados Unidos el 21 de marzo de 2023
This is what I've been using for a while to polish the cars I've been detailing. I haven't come across any issues and the long open time is something I can attest to. I use a softer polish pad just to be on the safe side since I'm still an amateur at it and it's been working great. I haven't worked on any paints that were more severely damaged, but it works great on swirls and sometimes a little deeper. The page says it works on 1500 grit marks and finer. I haven't had the gumption to actually mar my car with that and test it, so I can't say that that part is true, but for a normal swirl issue or maybe just a little rougher paint, this works wonders. Highly recommend.
GJZ
Comentado en los Estados Unidos el 24 de enero de 2023
3D is an American company that is well known in the detailing industry. Because you don't see their products on the shelves of typical brick and mortar stores, the company and its products are not as well known to the general product. I was glad to see them start marketing on Amazon. Their products are generally well reviewed, most, if not all, are made in the USA and they are reasonably priced.I-Cut is a very versatile product. You can greatly vary its cutting and polishing abilities by changing the type of pad you use. A wool pad results in a lot of cutting ability to remove heavy scratches and a foam pad, such as an orange, will allow you to polish to a pretty high degree. If using this before ceramic coating a vehicle, I would still probably use a finishing polish. You get very good working time with it and it is a breeze to remove.I have really liked using it to polish headlights. Instead of grabbing different products to correct in steps, I just swap the pad out. Very convenient.This is another quality product from 3D that will definitely save you some effort on heavier correcting jobs.
Damon Ransom
Comentado en los Estados Unidos el 16 de enero de 2023
I may not work in a high-volume shop, but I don't want to spend a bunch of extra time polishing with several different types of compounds, to end up with a shiny finish. I had several water spots that had etched themselves into the clear coat of my new car. I grabbed this new bottle and went to work with a rotary DA polisher. In short order, it removed the water spots, and left a nice shiny surface behind, ready for a nice coating of ceramic or wax. It wasn't hard to remove, it wiped right off with a nice microfiber towel. I'll definitely be using this polish on my vehicles as it warms up this spring, to bring the paint back to a nice shine after a harsh winter.
Productos recomendados
Mex $318.09
Mex $ 152 .00 Mex $152.00
Mex $201.00
Mex $ 110 .00 Mex $110.00
Mex $398.47
Mex $ 219 .00 Mex $219.00