No hay artículos en el carro
No hay artículos en el carro Especificaciones:
Función de programación: puede grabar FLASH ROM, EEPROM, etc.
Función de simulación: admite varios métodos de depuración como el funcionamiento a toda velocidad, depuración en un solo paso, depuración de punto de interrupción, etc.
Rendimiento de simulación: con interfaz USB para depuración de simulación, depuración en un solo paso, depuración de punto de interrupción, respuesta rápida.
Rendimiento de programación: interfaz USB, descarga ICSP, velocidad de descarga rápida
Conecte el PC con la interfaz USB
Herramientas de desarrollo PICkit3 incorporan controladores para la comunicación USB de alta velocidad
Interfaz de conexión con la placa de destino
Interfaz estándar ICSP especificada por PICkit3
El Firmware se puede actualizar (el método de actualización es la actualización automática, y Microchip proporcionará un programa de actualización).
El IC compatible con PICKIT3 se puede ver a través de MPLAB IDE v8.92, abrir el software, configurar>seleccionar dispositivo PICKIT3 es compatible con una luz verde.
Dispositivos de 8 bits - PIC10F/12F/16F
PIC10F/12F/16F5X.
Dispositivos de 8 bits - PIC18F
PIC18CXX/FXX.
Dispositivos de 16 bits
dsPIC30F/33F, PIC24F/H.
Dispositivos de 32 bits
PIC32MX
Dado que la interfaz ICSP del PIC tiene solo una fila de conectores 6PIN, debe prestar atención a la dirección izquierda y derecha de la conexión cuando el PICkit3 esté conectado a la placa de destino del PIC. No lo conectes para evitar quemar el descargador PICkit3.
Estado del indicador LED PICkit3:
Potencia: verde, se ilumina cuando se enciende o se conecta a la placa de destino.
Activo: Azul, iluminado cuando el PICkit 3 ha establecido una comunicación o mando/recepción con el PC.
Estado:
Verde, se ilumina cuando el depurador funciona normalmente (inactivo).
Amarillo, se ilumina cuando la operación está ocupada.
Rojo, se ilumina cuando el depurador falla.
El paquete incluye: 1 unidad.
Jason Hissong's Store
Comentado en los Estados Unidos el 19 de marzo de 2025
This worked perfectly for my application. No issues or trouble. I too am upgrading the servo firmware for my Losmandy Gemini Mount. I had to make my own custom cable, but it worked out fine. Thanks to the other reviewer for mentioning that this works with the Gemini!!!
Jason Hissong's Store
Comentado en los Estados Unidos el 19 de marzo de 2025
This worked perfectly for my application. No issues or trouble. I too am upgrading the servo firmware for my Losmandy Gemini Mount. I had to make my own custom cable, but it worked out fine. Thanks to the other reviewer for mentioning that this works with the Gemini!!!
Jason Hissong's Store
Comentado en los Estados Unidos el 19 de marzo de 2025
This worked perfectly for my application. No issues or trouble. I too am upgrading the servo firmware for my Losmandy Gemini Mount. I had to make my own custom cable, but it worked out fine. Thanks to the other reviewer for mentioning that this works with the Gemini!!!
Jason Hissong's Store
Comentado en los Estados Unidos el 19 de marzo de 2025
This worked perfectly for my application. No issues or trouble. I too am upgrading the servo firmware for my Losmandy Gemini Mount. I had to make my own custom cable, but it worked out fine. Thanks to the other reviewer for mentioning that this works with the Gemini!!!
Jason Hissong's Store
Comentado en los Estados Unidos el 19 de marzo de 2025
This worked perfectly for my application. No issues or trouble. I too am upgrading the servo firmware for my Losmandy Gemini Mount. I had to make my own custom cable, but it worked out fine. Thanks to the other reviewer for mentioning that this works with the Gemini!!!
Jason Hissong's Store
Comentado en los Estados Unidos el 19 de marzo de 2025
This worked perfectly for my application. No issues or trouble. I too am upgrading the servo firmware for my Losmandy Gemini Mount. I had to make my own custom cable, but it worked out fine. Thanks to the other reviewer for mentioning that this works with the Gemini!!!
Jason Hissong's Store
Comentado en los Estados Unidos el 19 de marzo de 2025
This worked perfectly for my application. No issues or trouble. I too am upgrading the servo firmware for my Losmandy Gemini Mount. I had to make my own custom cable, but it worked out fine. Thanks to the other reviewer for mentioning that this works with the Gemini!!!
Jason Hissong's Store
Comentado en los Estados Unidos el 19 de marzo de 2025
This worked perfectly for my application. No issues or trouble. I too am upgrading the servo firmware for my Losmandy Gemini Mount. I had to make my own custom cable, but it worked out fine. Thanks to the other reviewer for mentioning that this works with the Gemini!!!
Margie
Comentado en los Estados Unidos el 17 de marzo de 2025
Was a little hard to push together but then was perfect.
Wes S
Comentado en los Estados Unidos el 5 de julio de 2024
I used it to program the pic's in my Losmandy telescope mount so I could update to Gemini 2 level 6. Worked fine with the Microchip software. No complaints. If you buy one to do what I did, order some 2.0 mm male header pins to make an adapter, this has the standard 2.5mm pitch.
Wes S
Comentado en los Estados Unidos el 5 de julio de 2024
I used it to program the pic's in my Losmandy telescope mount so I could update to Gemini 2 level 6. Worked fine with the Microchip software. No complaints. If you buy one to do what I did, order some 2.0 mm male header pins to make an adapter, this has the standard 2.5mm pitch.
Wes S
Comentado en los Estados Unidos el 5 de julio de 2024
I used it to program the pic's in my Losmandy telescope mount so I could update to Gemini 2 level 6. Worked fine with the Microchip software. No complaints. If you buy one to do what I did, order some 2.0 mm male header pins to make an adapter, this has the standard 2.5mm pitch.
Wes S
Comentado en los Estados Unidos el 5 de julio de 2024
I used it to program the pic's in my Losmandy telescope mount so I could update to Gemini 2 level 6. Worked fine with the Microchip software. No complaints. If you buy one to do what I did, order some 2.0 mm male header pins to make an adapter, this has the standard 2.5mm pitch.
Wes S
Comentado en los Estados Unidos el 5 de julio de 2024
I used it to program the pic's in my Losmandy telescope mount so I could update to Gemini 2 level 6. Worked fine with the Microchip software. No complaints. If you buy one to do what I did, order some 2.0 mm male header pins to make an adapter, this has the standard 2.5mm pitch.
Wes S
Comentado en los Estados Unidos el 5 de julio de 2024
I used it to program the pic's in my Losmandy telescope mount so I could update to Gemini 2 level 6. Worked fine with the Microchip software. No complaints. If you buy one to do what I did, order some 2.0 mm male header pins to make an adapter, this has the standard 2.5mm pitch.
Wes S
Comentado en los Estados Unidos el 5 de julio de 2024
I used it to program the pic's in my Losmandy telescope mount so I could update to Gemini 2 level 6. Worked fine with the Microchip software. No complaints. If you buy one to do what I did, order some 2.0 mm male header pins to make an adapter, this has the standard 2.5mm pitch.
Wes S
Comentado en los Estados Unidos el 5 de julio de 2024
I used it to program the pic's in my Losmandy telescope mount so I could update to Gemini 2 level 6. Worked fine with the Microchip software. No complaints. If you buy one to do what I did, order some 2.0 mm male header pins to make an adapter, this has the standard 2.5mm pitch.
AUTOMAN
Comentado en los Estados Unidos el 19 de julio de 2024
I've used Microchip PIC devices for many years. This programmer is a copy but programs PIC devices as well as the originals. I have not tried the in-circuit debugging / emulating functionality.
AUTOMAN
Comentado en los Estados Unidos el 19 de julio de 2024
I've used Microchip PIC devices for many years. This programmer is a copy but programs PIC devices as well as the originals. I have not tried the in-circuit debugging / emulating functionality.
AUTOMAN
Comentado en los Estados Unidos el 19 de julio de 2024
I've used Microchip PIC devices for many years. This programmer is a copy but programs PIC devices as well as the originals. I have not tried the in-circuit debugging / emulating functionality.
AUTOMAN
Comentado en los Estados Unidos el 19 de julio de 2024
I've used Microchip PIC devices for many years. This programmer is a copy but programs PIC devices as well as the originals. I have not tried the in-circuit debugging / emulating functionality.
AUTOMAN
Comentado en los Estados Unidos el 19 de julio de 2024
I've used Microchip PIC devices for many years. This programmer is a copy but programs PIC devices as well as the originals. I have not tried the in-circuit debugging / emulating functionality.
AUTOMAN
Comentado en los Estados Unidos el 19 de julio de 2024
I've used Microchip PIC devices for many years. This programmer is a copy but programs PIC devices as well as the originals. I have not tried the in-circuit debugging / emulating functionality.
AUTOMAN
Comentado en los Estados Unidos el 19 de julio de 2024
I've used Microchip PIC devices for many years. This programmer is a copy but programs PIC devices as well as the originals. I have not tried the in-circuit debugging / emulating functionality.
AUTOMAN
Comentado en los Estados Unidos el 19 de julio de 2024
I've used Microchip PIC devices for many years. This programmer is a copy but programs PIC devices as well as the originals. I have not tried the in-circuit debugging / emulating functionality.
WillG
Comentado en los Estados Unidos el 22 de marzo de 2024
Works OK. I would prefer to do everything at the command line. Have to use Microchip's IDE and IPE. Their software has more functions than I know what to do with. All I want to do is compile my source code and store the hex file in the Pic microcontroller. Preferably at the command line.
WillG
Comentado en los Estados Unidos el 22 de marzo de 2024
Works OK. I would prefer to do everything at the command line. Have to use Microchip's IDE and IPE. Their software has more functions than I know what to do with. All I want to do is compile my source code and store the hex file in the Pic microcontroller. Preferably at the command line.
WillG
Comentado en los Estados Unidos el 22 de marzo de 2024
Works OK. I would prefer to do everything at the command line. Have to use Microchip's IDE and IPE. Their software has more functions than I know what to do with. All I want to do is compile my source code and store the hex file in the Pic microcontroller. Preferably at the command line.
WillG
Comentado en los Estados Unidos el 22 de marzo de 2024
Works OK. I would prefer to do everything at the command line. Have to use Microchip's IDE and IPE. Their software has more functions than I know what to do with. All I want to do is compile my source code and store the hex file in the Pic microcontroller. Preferably at the command line.
WillG
Comentado en los Estados Unidos el 22 de marzo de 2024
Works OK. I would prefer to do everything at the command line. Have to use Microchip's IDE and IPE. Their software has more functions than I know what to do with. All I want to do is compile my source code and store the hex file in the Pic microcontroller. Preferably at the command line.
WillG
Comentado en los Estados Unidos el 22 de marzo de 2024
Works OK. I would prefer to do everything at the command line. Have to use Microchip's IDE and IPE. Their software has more functions than I know what to do with. All I want to do is compile my source code and store the hex file in the Pic microcontroller. Preferably at the command line.
WillG
Comentado en los Estados Unidos el 22 de marzo de 2024
Works OK. I would prefer to do everything at the command line. Have to use Microchip's IDE and IPE. Their software has more functions than I know what to do with. All I want to do is compile my source code and store the hex file in the Pic microcontroller. Preferably at the command line.
WillG
Comentado en los Estados Unidos el 22 de marzo de 2024
Works OK. I would prefer to do everything at the command line. Have to use Microchip's IDE and IPE. Their software has more functions than I know what to do with. All I want to do is compile my source code and store the hex file in the Pic microcontroller. Preferably at the command line.
SV
Comentado en los Estados Unidos el 9 de diciembre de 2024
These baseball holders are pretty nice since they look great and are easy to assemble. Unfortunately, out of the three holders, one of the holders would not assemble correctly because it came with two of the same stand pieces. I ended up having to saw it apart to get it to fit in the base. Overall, The stands look great, but we had one bad one that required a hacksaw to make it work.
Holly
Comentado en los Estados Unidos el 19 de diciembre de 2024
These are useless pieces of plastic. Two of the three didn’t assemble because the holes aren’t big enough for the stand to go in. Also won’t issue a credit and will make me go out of my way to Khols to return for a $6 item. Just throwing in the trash.
Customer
Comentado en los Estados Unidos el 22 de noviembre de 2024
Exactly as pictured. Easy to put together.
Balanced View
Comentado en los Estados Unidos el 15 de octubre de 2024
This is a great stand to display objects such as baseballs, golf balls, or anything that has a rounded base. It was easy to assemble and it was not too difficult to peel off the plastic covering. The acrylic material is light and came with no scratches or sharp edges. The panels clicked into place easily and it feels secure.
Sean Wooten
Comentado en los Estados Unidos el 19 de enero de 2022
It works just fine, don’t mind the negative reviews. I’m using MPLAB X v6.0 and it’s programming my PIC12F as expected.However, the “Status” led indicator on the PicKit3 clone may sustain a green light then blink red every second. The documentation states that this is due to Vdd/Vss problems but this hasn’t effected programming the PIC.If you are new to PIC programming (like I am) be careful not to overwrite your preprogrammed calibration memory. If you accidentally write over it, your PIC will not function as expected until you restore your calibration memory from a working PIC.Keep coding. 👓
Sean Wooten
Comentado en los Estados Unidos el 19 de enero de 2022
It works just fine, don’t mind the negative reviews. I’m using MPLAB X v6.0 and it’s programming my PIC12F as expected.However, the “Status” led indicator on the PicKit3 clone may sustain a green light then blink red every second. The documentation states that this is due to Vdd/Vss problems but this hasn’t effected programming the PIC.If you are new to PIC programming (like I am) be careful not to overwrite your preprogrammed calibration memory. If you accidentally write over it, your PIC will not function as expected until you restore your calibration memory from a working PIC.Keep coding. 👓
Sean Wooten
Comentado en los Estados Unidos el 19 de enero de 2022
It works just fine, don’t mind the negative reviews. I’m using MPLAB X v6.0 and it’s programming my PIC12F as expected.However, the “Status” led indicator on the PicKit3 clone may sustain a green light then blink red every second. The documentation states that this is due to Vdd/Vss problems but this hasn’t effected programming the PIC.If you are new to PIC programming (like I am) be careful not to overwrite your preprogrammed calibration memory. If you accidentally write over it, your PIC will not function as expected until you restore your calibration memory from a working PIC.Keep coding. 👓
Sean Wooten
Comentado en los Estados Unidos el 19 de enero de 2022
It works just fine, don’t mind the negative reviews. I’m using MPLAB X v6.0 and it’s programming my PIC12F as expected.However, the “Status” led indicator on the PicKit3 clone may sustain a green light then blink red every second. The documentation states that this is due to Vdd/Vss problems but this hasn’t effected programming the PIC.If you are new to PIC programming (like I am) be careful not to overwrite your preprogrammed calibration memory. If you accidentally write over it, your PIC will not function as expected until you restore your calibration memory from a working PIC.Keep coding. 👓
Sean Wooten
Comentado en los Estados Unidos el 19 de enero de 2022
It works just fine, don’t mind the negative reviews. I’m using MPLAB X v6.0 and it’s programming my PIC12F as expected.However, the “Status” led indicator on the PicKit3 clone may sustain a green light then blink red every second. The documentation states that this is due to Vdd/Vss problems but this hasn’t effected programming the PIC.If you are new to PIC programming (like I am) be careful not to overwrite your preprogrammed calibration memory. If you accidentally write over it, your PIC will not function as expected until you restore your calibration memory from a working PIC.Keep coding. 👓
Sean Wooten
Comentado en los Estados Unidos el 19 de enero de 2022
It works just fine, don’t mind the negative reviews. I’m using MPLAB X v6.0 and it’s programming my PIC12F as expected.However, the “Status” led indicator on the PicKit3 clone may sustain a green light then blink red every second. The documentation states that this is due to Vdd/Vss problems but this hasn’t effected programming the PIC.If you are new to PIC programming (like I am) be careful not to overwrite your preprogrammed calibration memory. If you accidentally write over it, your PIC will not function as expected until you restore your calibration memory from a working PIC.Keep coding. 👓
Sean Wooten
Comentado en los Estados Unidos el 19 de enero de 2022
It works just fine, don’t mind the negative reviews. I’m using MPLAB X v6.0 and it’s programming my PIC12F as expected.However, the “Status” led indicator on the PicKit3 clone may sustain a green light then blink red every second. The documentation states that this is due to Vdd/Vss problems but this hasn’t effected programming the PIC.If you are new to PIC programming (like I am) be careful not to overwrite your preprogrammed calibration memory. If you accidentally write over it, your PIC will not function as expected until you restore your calibration memory from a working PIC.Keep coding. 👓
Sean Wooten
Comentado en los Estados Unidos el 19 de enero de 2022
It works just fine, don’t mind the negative reviews. I’m using MPLAB X v6.0 and it’s programming my PIC12F as expected.However, the “Status” led indicator on the PicKit3 clone may sustain a green light then blink red every second. The documentation states that this is due to Vdd/Vss problems but this hasn’t effected programming the PIC.If you are new to PIC programming (like I am) be careful not to overwrite your preprogrammed calibration memory. If you accidentally write over it, your PIC will not function as expected until you restore your calibration memory from a working PIC.Keep coding. 👓
Manuel nicalas
Comentado en México el 20 de abril de 2022
Bueno si funciona
Manuel nicalas
Comentado en México el 20 de abril de 2022
Bueno si funciona
Manuel nicalas
Comentado en México el 20 de abril de 2022
Bueno si funciona
Manuel nicalas
Comentado en México el 20 de abril de 2022
Bueno si funciona
Manuel nicalas
Comentado en México el 20 de abril de 2022
Bueno si funciona
Manuel nicalas
Comentado en México el 20 de abril de 2022
Bueno si funciona
Manuel nicalas
Comentado en México el 20 de abril de 2022
Bueno si funciona
Manuel nicalas
Comentado en México el 20 de abril de 2022
Bueno si funciona
Productos recomendados
Mex $2,906.57
Mex $ 1,191 .00 Mex $1,191.00
Mex $659.00
Mex $ 336 .00 Mex $336.00
Mex $299.00
Mex $ 164 .00 Mex $164.00
Mex $1,417.29
Mex $ 595 .00 Mex $595.00
Mex $8,521.31
Mex $ 1,881 .00 Mex $1,881.00