No hay artículos en el carro
No hay artículos en el carroDescripción del producto
Arducam Camera Module 3 ofrece imágenes de alta calidad con su sensor de imagen IMX708 de 12 MP y modo HDR para una salida de hasta 3 MP. Este módulo ofrece una SNR excepcional, equipada con una lente de enfoque automático HFOV de 100°, PDAF y DPC 2D.
El módulo de cámara oficial IMX708 3 se puede utilizar directamente en Raspberry Pi (B0306, B0307). Arducam Camera Module 3 necesitará alguna modificación en la configuración.
Asegúrate de que estás ejecutando el Raspberry Pi Bullseye OS 6.1.x y posterior (las versiones anteriores a 6.1.x no son compatibles). Necesitas instalar el driver de cámara para el módulo de cámara de enfoque automático Arducam IMX708. Por favor, consulte bit.ly/ArduCam_CM3_B0311Usar libcamera para acceder a la cámara, todos los comandos deben dirigirse al archivo de sintonía: --tuning-file /opt/arducam/imx708-b0311.json
Modos de vídeo
2304 × 1296p56, 2304 × 1296p30 HDR, 1536 × 864p120
- 1 módulo de cámara AF IMX708
- 1 cable FPC de 15 a 22 pines
- 1 guía de inicio rápido de papel
Especificaciones:
Sensor de imagen: IMX708
Resolución: 11,9 MP
Tipo de enfoque: Enfoque automático
Campo de visión (FOV): 120° (D) x 100° (alto) x 72° (V)
Plataforma de soporte: Raspberry Pi 4B/3B/2B/Zero
Aplicaciones
AstrofotografíaCámaras de vigilanciaCámaras FACámaras industriales/agrícolasRobots móviles autónomos, UGV/UAV, ADAS, etc.
Backyard Camper
Comentado en los Estados Unidos el 10 de marzo de 2025
It's very frustrating to set up. But once it worked it's great.I ordered 2. I couldn't make the first one work, so I ordered the second one. When I replace the ribbon cable on the second one for Pi Zero 2W, I realized the cable on the camera was supposed to be golden pins up! I don't remember anything else needs the pins up. It didn't immediately work, there are something else. As some pointed out, you need dtoverlay=imx708. There are another imx708-b0311.dtbo installed by ArduCam install script, the name seems perfectly match but that one doesn't work.ArduCam driver is for kernel 6.1.21-v8+, as in March 2025 we are supposed to be on kernel 6.12.13-v8+. There is no clear way to downgrade your kernel. I managed to downgrade it with hash code "sudo rpi-update 0b15297". But did it help? I don't know. After 2 days struggling with this camera, I already lost what actually made it work.But it does work, including the first one. I'm going to keep both of them for my projects because of its distinguished feature set. Autofocus is working, and HDR is working.
ORSunshine
Comentado en los Estados Unidos el 21 de noviembre de 2024
Seems like a nice camera but I never got it to work with my Rpi zero w 2. I’m running the “bookworm” OS. I tried a lot of things but finally gave up. Going with an official rpi camera now.
danno
Comentado en los Estados Unidos el 31 de enero de 2024
Ordered two, one was a dud. Ordered a replacement which worked fine. So, 2 out of three.Other than that, good picture quality and sensitivity. I ordered the 120deg fov autofocus with uvir filter to use as a sky camera. Not quite as sensitive as the imc280 based camera it replaced, but much cheaper and much smaller form factor.The instructions are confusing. If you have an rpi4, use the cable the camera comes with, not the white one as suggested in the images. Also, for debian bookworm, the libcamera library is preinstalled and needs to be used. In addition, you need to make the config.txt changes to auto detect and use the imx708 drivers as indicated.On mine you also need to run the libcamera hello app once to get it recognized for the first time.Very good value for the money imo. Btw this lens does have a little bit of barrel distortion but surprisingly well corrected for 120 deg.
Laird Paul
Comentado en los Estados Unidos el 9 de noviembre de 2023
Followed all the instructions but still could not get it to work. So I hired A Pi guy and he coulden't get it to work either. Wasted $50 for cam a cable.
Ted Toad
Comentado en los Estados Unidos el 17 de noviembre de 2023
This is the 'C' version of the camera which works well with the Rpi Bullseye OS on the Rpi-4. You do have to make a couple of changes to the config file which is easy if you go to their website which has the actual commands required.Tried unsuccessfully to use as a standard pi camera instead had to use the libcamera libraries to access it.
Productos recomendados
Mex $350.00
Mex $ 168 .00 Mex $168.00