No hay artículos en el carro
No hay artículos en el carroDescripción del producto
¿Está buscando una lijadora versátil y fiable?
La lijadora de disco de correa de BUCKTOOL es fácil de pulir todos los bordes dentados y astillas de tu madera y madera y hacer que sea suave. Es una idea para lijado y pulido de madera fina.
Potente motor
Esta lijadora fue accionada directamente por un motor de inducción de 3/4 HP, el motor proporciona suficiente potencia para operaciones de lijado pequeñas y grandes en varios materiales.
Ángulo ajustable
Mesa de trabajo ajustable en ángulo con medidor de inglete se puede utilizar tanto en disco de lijado como en cinta de lijado. La cinta de lijado se inclina hasta 90 grados verticales.
Sin mantenimiento
Esta lijadora no utiliza cinturón, no tiene engranaje, por lo que no tiene que ajustar la tensión de la correa de engranaje, cambiar la correa del engranaje dañado como antes.
Protección del disco de lijado durante el envío
Lijado horizontal y vertical
Actualizar dos mesas de trabajo para disco y correa
Directamente impulsado
Customer
Comentado en Canadá el 13 de febrero de 2025
Some of the reviews are inaccurate, this is a good quality tool period. And easy belt replacement.
Customer
Comentado en el Reino Unido el 23 de agosto de 2024
In 30 years of having a home work shop, this is the seventh belt/disc sander I've had and it's by far the most powerful and the first one that I haven't been able to significantly slow down when sanding wider material. I do a lot of different stuff from making knives to bandsaw boxes and small items of furniture so my sander is probably my most used machine. This one is the best I've found in this sort of price range. Bucktool is not a brand I'm familiar with but they've obviously given a bit of thought into the design of this sander with knife making in mind. The ability to get a plunge line using a 4" belt means you can grind bevels a lot faster than a 2" grinder and the power allows you to grind and shape a knife blade very quickly. The solid iron work table for the belt is excellent and holds firmly in use, allowing good accuracy when bevel grinding. The belt tracking can be a bit of a pain to get just right for the plunge lines if you're grinding on the left side as well as the right but I've had decent results doing edge up and edge down grinds. Having a larger 8" disc instead of the more usual 6" is a major plus allowing fast removal of material. All in, a very impressive belt/disc sander/grinder for the price.
Gary
Comentado en los Estados Unidos el 24 de diciembre de 2024
I bought this sander to replace my 20 year old Craftsman. It is a much better machine, with much less internal friction. It coasts to a stop after several revolutions. The Craftsman stopped in one turn. I'm giving it a "5" in spite of a couple of small manufacturing issues I encountered during setup.One of the holes for mounting the machine to the rotating base was blocked from the casting process, but easily drilled out with a 5/16 bit.The rotating base, although heavy and substantial, wobbles while in use. I wasn't expecting this, but I don't think this will hurt the sanding performance. Also the base has a spring loaded stop pin that easily pulls up to allow it to rotate. The pin is a little too long to retract fully from the locking hole below. So they added a flat nut (jamb nut) to the shoulder, to keep it from screwing in so far (my theory). But that keeps it too high, so the spring loaded pin does not fully engage the locking hole. My fix was to replace the jamb nut with a 1/4" washer that I drilled out to close tolerance so the threads on the 5/16" (or maybe 8mm?) pin would jam tightly into it. It works better.The only other thing I will mention is I added a small bushing cut from 11/64" x .014 brass tubing to the worktable adjustment screws to fill the semicircular slot more fully. Not really necessary, but it makes a closer fit and less wiggle.Other nice features......-The adjustment levers for the adjustable platforms are levers, not knobs and easier to tighten, but also can be disengaged after tightening to spin them out of the way.- Dust extraction is better than my old one and the dust cover has slotted holes for the mounting screws, making it easier to remove for belt replacement.
Customer
Comentado en Canadá el 2 de noviembre de 2024
Better quality than expected. Dust collection needs some work,but does an ok job. Worth the money for sure 👍🏻
Bachie
Comentado en Canadá el 11 de noviembre de 2024
Very well built! The large tables and square are invaluable and render the cheap competitors useless
Armando Occelli
Comentado en México el 30 de enero de 2024
Magnifica lijadora muy poderosa
Productos recomendados
$4,683MXN
$ 1,881 MXN $1,881MXN
$396MXN
$ 198 MXN $198MXN