Ich bin sehr zufrieden mit dem Armband! Es ist eine ausgezeichnete Alternative zum Pokémon Go Plus oder dem Pokéball Plus und funktioniert wunderbar mit der Pokémon Go App.Die Verbindung ist stabil und es ermöglicht das automatische Fangen von Pokémon, ohne das Handy ständig in der Hand halten zu müssen ideal für unterwegs oder beim Spazierengehen. Besonders praktisch finde ich den kleinen Bildschirm, der Informationen übersichtlich anzeigt und das Armband regelmäßig Feedback gibt.Auch die Akkulaufzeit überzeugt. Ich kann das Gerät problemlos mehrere Tage nutzen, bevor es wieder aufgeladen werden muss

Wouldn’t charge and is now a dead device

I really like this device because is generally connects reliably and can reconnect automatically at the end of an hour. All of the catchers disconnect after 1 hour, but with this one it persists in trying to reconnect for 2-3 minutes. I just need to open the game, click the connection ball in the game and press my phone pop ups as normal, and then it continues to catch and spin as Normal.I have 1 go tcha and 1 brooks device - hardware seems identical software is different.This device connects more reliably than Go tcha and has the reconnect after 1 hr the Go tcha doesn't have. That is a very good feature. Go tcha can disconnect and there is no vibration to let me know.-------------------------------- My Phone and Game connection reset suggestions -------------------Resetting Phone or GAMETo fix my connection issues, I usually have to do number 3 on my phone. I never needed 1, 2 or 4.These are not the fault of the catching device.1. Restart the game.2. Remove the device in pokemon go, ensure it is gone from the bluetooth setting. Re-attach the device in pokemon go.3. After pokemon updates the game won't connect to either device. I figure old broken code is still in the game so I reinstall the game at home now after every pokemon update. (my most frequent problem)4. Restart the phoneResetting the Brooks device itselfFor the first time the device needed resetting after 5 months. This is better than my go tcha does. The reset for the device is not in the online manual or in the manual in box, I did finally find a link to a youtube video that I followed.-------------------------------- Brooks Support Auto Catch Reset Video -------------------------Look on you tube for "How to reset Reviver Dia Plus" it works for all the brooks auto catch devices.I wrote down these following instructions for myself as it took me a few tries to get this done correctly. This will fix the connection issues.-------------------------------- My Brooks Auto Catch Reset steps -------------------------------Prep1. Remove auto catcher USB Charger from power2. Put auto catcher into USB Charger cable3. Prepare to put Cable into the charge ( because you need to see the face of the device while you insert )One Time Steps1. Push once to turn on auto catcher2. You now push then HOLD the brooks power button until "Brooks" with sparkles shows upRepeat - 3 times - no need to count? Power indicators show -> plug it in? Power indicators show -> plug outEach time the power indicators show either plug it in or unplug it - it will show the Brooks with Sparkles before the power indicators show up on the third cycle.Just keep repeating plugging in or plug out each time power indicators start to show.The power indicators flashes 3 or 4 times so just plug in or out when you see the power indicators, don't wait and don't hurry, you have enough time.The auto catcher goes black for 2-3 seconds on the third cycle then the sparkles show up.If too slow you will see:• one of pokemon catch settings• the device will be blank for 5 secondsI really screwed it up when testing a couple of times and both times the device suddenly reset on the first cycle of my next try.I can't get it right every time but it's not that bad even for me, an old dude with dubious vision.I really like seeing the brooks with sparkles as then I absolutely know the device has been reset.----------------------------------------------------------------------------------------------------- It is fairly easy to click the device and possibly mess up the catch or spin setting. ---Look to see if your settings are all correct using the device manual.If the catch and spin settings look correct but it is not working then do the device reset as I described and watch the brooks support video as well to get the hang of it.

Lo recibí hace ya un par de semanas y no me ha dado ningún problema. Carga bastante rápido y se puede hacer desde un puerto usb conectado a un ordenador aunque esté apagado (imagino que un portátil con batería que no esté a 0 también valdrá). La batería, si se usa a ratos, dura más de 2 días. Un uso continuado da unas 12h. La conexión es muy rápida y sin errores. El dispositivo además te avisa cuando se desconecta. Es cierto que se desconecta muchas veces, pero te avisa cada vez y se reconecta en 3 segundos. Eso sí, debes tener pokemon go activo aunque esté el teléfono con la pantalla apagada, y para reconectarlo, entrar en el juego y tocar la pokeball.Es un poco lento para capturar pokemon y para girar las paradas, pero es muy indulgente con la velocidad del coche, por lo que coge paradas que con el original sería impensable.Muy satisfecho con el producto, la verdad. Lo recomiendo 100%

It works very well! Just make sure to have poke balls and it will do the rest.